Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamano, Hidemasa; Takai, Toshihide; Emura, Yuki; Fukuyama, Hiroyuki*; Nishi, Tsuyoshi*; Morita, Koji*; Nakamura, Kinya*; Pellegrini, M.*
Nihon Kikai Gakkai 2023-Nendo Nenji Taikai Koen Rombunshu (Internet), 5 Pages, 2023/09
A research project has been conducting thermophysical property measurement of a eutectic melt, eutectic melting reaction and relocation experiments, eutectic reaction mechanism investigation, and physical model development on the eutectic melting reaction for reactor application analysis in order to simulate the eutectic melting reaction and relocation behavior of boron carbide as a control rod material and stainless steel during a core disruptive accident in an advanced sodium-cooled fast reactor designed in Japan. This paper describes the project overview and progress until JFY2022.
Yamano, Hidemasa; Morita, Koji*
Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.4295 - 4308, 2023/08
This study applied the SIMMER-IV code with the newly developed model to a preliminary SA analysis of the SFR. The analysis results show that the eutectic reaction is caused by the contact between the liquid SS and the broken B
C pellets which are released to the coolant channel after the failure of cladding which is melted by the mixture of liquid SS and fuel particles coming from the neighboring fuel assemblies. The liquid eutectic material formed by the reaction moves from the control assembly to the neighboring fuel assemblies. The lower density of the eutectic melt than molten SS drives the upward motion of the eutectic in the molten core pool. This analysis indicated that the SIMMER-IV code using the eutectic reaction model has successfully simulated the eutectic reaction and the relocation of the eutectic melt as well as the reactivity transient behavior caused by the molten core material relocation.
Zhang, T.*; Yao, Y.*; Morita, Koji*; Liu, X.*; Liu, W.*; Imaizumi, Yuya; Kamiyama, Kenji
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05
Zhang, T.*; Morita, Koji*; Liu, X.*; Liu, W.*; Kamiyama, Kenji
Annals of Nuclear Energy, 179, p.109389_1 - 109389_10, 2022/12
Times Cited Count：1 Percentile：31.61(Nuclear Science & Technology)Takatsuka, Daichi*; Morita, Koji*; Liu, W.*; Zhang, T.*; Nakamura, Takeshi*; Kamiyama, Kenji
Proceedings of 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12) (Internet), 10 Pages, 2022/10
Yamano, Hidemasa; Morita, Koji*
Nihon Kikai Gakkai 2022-Nendo Nenji Taikai Koen Rombunshu (Internet), 5 Pages, 2022/09
It is necessary to simulate a eutectic melting reaction and relocation behavior of boron carbide (B4C) as a control rod material and stainless steel (SS) during a core disruptive accident (CDA) in an advanced large-scale sodium-cooled fast reactor (SFR) designed in Japan. A physical model simulating the eutectic reaction and relocation of the eutectic melt was developed to incorporate into the fast reactor severe accident analysis code SIMMER-IV for the CDA numerical analysis of SFRs. This study applied the SIMMER-IV code with the newly developed model to the CDA analysis of the SFR. This analysis indicated that the SIMMER-IV code using the eutectic reaction model has successfully simulated the eutectic reaction and the upward motion of the eutectic melt in the molten core pool as well as the reactivity transient behavior caused by the molten core material relocation.
Yamano, Hidemasa; Takai, Toshihide; Emura, Yuki; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Ota, Hiromichi*; Morita, Koji*; Nakamura, Kinya*; Fukai, Hirofumi*; et al.
Proceedings of 13th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-13) (Internet), 12 Pages, 2022/09
This paper describes the project overview and progress of experimental and analytical studies conducted until 2020. Specific results in this paper are the measurement of the eutectic reaction rates and the validation of physical model describing the eutectic reaction in the analysis code through the numerical analysis of the BC-SS eutectic reaction rate experiments in which a BC pellet was placed in a SS crucible.
Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.
Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07
This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.
Yamano, Hidemasa; Morita, Koji*
Proceedings of 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19) (Internet), 16 Pages, 2022/03
For a severe accident (SA) simulation of sodium-cooled fast reactors, a eutectic reaction model between boron carbide (BC) and stainless steel (SS) has been developed to be incorporated into the SA simulation codes: SIMMER-III/IV. To confirm the applicability of SIMMER-IV involving the eutectic reaction model to reactor simulations, this study has preliminarily applied this code with the newly developed physical model to a SA simulation of a large-scale SFR designed in Japan. The simulation results show that the eutectic reaction is caused by the contact between the liquid SS and the broken BC pellets which are released to the coolant channel after the failure of cladding which is melted by the mixture of liquid SS and fuel particles coming from the neighboring fuel assemblies. The liquid eutectic material formed by the reaction stayed in the control assembly and the neighboring fuel assemblies. This preliminary simulation shows that the spreading area of BC-SS eutectic formation is limited within this calculation time.
Takamatsu, Kuniyoshi; Matsumoto, Tatsuya*; Liu, W.*; Morita, Koji*
Annals of Nuclear Energy, 162, p.108512_1 - 108512_10, 2021/11
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)The objectives of this study are as follows: to understand the characteristics, degree of passive safety features for heat removal were compared for RCCSs based on atmospheric radiation and based on atmospheric natural circulation under the same conditions. Next, simulations on accidental conditions, such as increasing average heat-transfer coefficient via natural convection due to natural disasters, were performed with STAR-CCM+, and methodology to control the amount of heat removal was discussed. As a result, a new RCCS based on atmospheric radiation is recommended because of the excellent degree of passive safety features/conditions, and the amount of heat removal by heat transfer surfaces which can be controlled. Finally, methodology to determine structural thickness of scaled-down heat removal test facilities for reproducing natural convection and radiation was developed, and experimental methods by using pressurized and decompressed chambers was also proposed.
Zhang, T.*; Morita, Koji*; Liu, X.*; Liu, W.*; Kamiyama, Kenji
Extended abstracts of the 2nd Asian Conference on Thermal Sciences (Internet), 2 Pages, 2021/10
For the Japanese sodium cooled fast reactor, a fuel subassembly with an inner duct structure (FAIDUS) was designed to avoid the re-criticality by preventing the large-scale pool formation. In the present study, using the finite volume particle method, the EAGLE ID1 test which was an in-pile test performed to demonstrate the effectiveness of FAIDUS was numerically simulated and the thermal-hydraulic mechanisms underlying the heat transfer process were analyzed.
Yamano, Hidemasa; Takai, Toshihide; Furukawa, Tomohiro; Kikuchi, Shin; Emura, Yuki; Kamiyama, Kenji; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Ota, Hiromichi*; et al.
Proceedings of 28th International Conference on Nuclear Engineering (ICONE 28) (Internet), 11 Pages, 2021/08
One of the key issues in a core disruptive accident (CDA) evaluation in sodium-cooled fast reactors is eutectic reactions between boron carbide (BC) and stainless steel (SS) as well as its relocation. Such behaviors have never been simulated in CDA numerical analyses in the past, therefore it is necessary to develop a physical model and incorporate the model into the CDA analysis code. This study focuses on BC-SS eutectic melting experiments, thermophysical property measurement of the eutectic melt, and physical model development for the eutectic melting reaction. The eutectic experiments involve the visualization experiments, eutectic reaction rate experiments and material analyses. The thermophysical properties are measured in a range from solid to liquid state. The physical model is developed for a CDA computer code based on the measured data of the eutectic reaction rate and the physical properties. This paper describes the project overview and progress of experimental and analytical studies conducted until 2019. Specific results in this paper are the validation of physical model describing BC-SS eutectic reaction in the CDA analysis code, SIMMER-III, through the numerical analysis of the BC-SS eutectic melting experiments in which a BC block was placed in a SS pool.
Takamatsu, Kuniyoshi; Matsumoto, Tatsuya*; Liu, W.*; Morita, Koji*
Annals of Nuclear Energy, 151, p.107867_1 - 107867_11, 2021/02
Times Cited Count：1 Percentile：16.35(Nuclear Science & Technology)A new RCCS with passive safety features consists of two continuous closed regions. One is a region surrounding RPV. The other is a cooling region with heat transferred to the ambient air. The new RCCS needs no electrical or mechanical driving devices. We compared the RCCS using atmospheric radiation with that using atmospheric natural circulation in terms of passive safety features and control methods for heat removal. The magnitude relationship for passive safety features is heat conduction 
radiation natural convection. Therefore, the magnitude for passive safety features of the former RCCS can be higher than that of the latter RCCS. In controlling the heat removal, the former RCCS changes the heat transfer area only. On the other hand, the latter RCCS needs to change the chimney effect. It is necessary to change the air resistance in the duct. Therefore, the former RCCS can control the heat removal more easily than the latter RCCS.
Zhang, T.*; Funakoshi, Kanji*; Liu, X.*; Liu, W.*; Morita, Koji*; Kamiyama, Kenji
Annals of Nuclear Energy, 150, p.107856_1 - 107856_10, 2021/01
Times Cited Count：5 Percentile：65.59(Nuclear Science & Technology)Sheikh, M. A. R.*; Liu, X.*; Matsumoto, Tatsuya*; Morita, Koji*; Guo, L.*; Suzuki, Toru*; Kamiyama, Kenji
Energies (Internet), 13(19), p.5018_1 - 5018_15, 2020/10
Times Cited Count：7 Percentile：22.89(Energy & Fuels)Yamano, Hidemasa; Takai, Toshihide; Furukawa, Tomohiro; Kikuchi, Shin; Emura, Yuki; Kamiyama, Kenji; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Ota, Hiromichi*; et al.
Proceedings of 2020 International Conference on Nuclear Engineering (ICONE 2020) (Internet), 10 Pages, 2020/08
One of the key issues in a core disruptive accident (CDA) evaluation in sodium-cooled fast reactors is eutectic reactions between boron carbide (BC) and stainless steel (SS) as well as its relocation. Such behaviors have never been simulated in CDA numerical analyses in the past, therefore it is necessary to develop a physical model and incorporate the model into the CDA analysis code. This study focuses on BC-SS eutectic melting experiments, thermophysical property measurement of the eutectic melt, and physical model development for the eutectic melting reaction. The eutectic experiments involve the visualization experiments, eutectic reaction rate experiments and material analyses. The thermophysical properties are measured in a range from solid to liquid state. The physical model is developed for a severe accident computer code based on the measured data of the eutectic reaction rate and the physical properties. This paper describes the project overview and progress of experimental and analytical studies conducted until 2018. Specific results in this paper are boron concentration distributions of solidified BC-SS eutectic sample in the eutectic melting experiments, which would be used for the validation of the eutectic physical model implemented into the computer code.
Liu, X.*; Morita, Koji*; Yamano, Hidemasa
Proceedings of 2020 International Conference on Nuclear Engineering (ICONE 2020) (Internet), 9 Pages, 2020/08
In our previous study, a two-dimensional fast reactor safety analysis code, SIMMER-III, was extended to include a physical model to simulate the eutectic reaction between stainless steel (SS) and BC. Based on experimental knowledge on eutectic reaction, the growth of eutectic material was modeled according to a parabolic rate law. Heat and mass transfer behaviors among reactor materials including a eutectic composition in solid and liquid phases were also modeled considering both equilibrium and non-equilibrium processes in phase change. Physical properties of the eutectic composition were also formulated based on experimental measurements for 5 mass% BC-SS composition. In this study, we extended the eutectic reaction model to SIMMER-IV, a three-dimensional counterpart of SIMMER-III. We performed validation analysis using SIMMER-III and SIMMER-IV with the developed model based on an experiment, where a BC pellet was immersed into a molten SS pool. Boron concentration in the pool was measured at several time points and the boron concentration after solidification of the molten pool was compared with the experiment post analysis result. Simulation results of boron distribution are comparable to the experimental results.
Takamatsu, Kuniyoshi; Matsumoto, Tatsuya*; Liu, W.*; Morita, Koji*
Annals of Nuclear Energy, 133, p.830 - 836, 2019/11
Times Cited Count：2 Percentile：21.58(Nuclear Science & Technology)A RCCS having passive safety features through radiation and natural convection was proposed. The RCCS design consists of two continuous closed regions: an ex-reactor pressure vessel region and a cooling region with a heat-transfer surface to ambient air. The RCCS uses a novel shape to remove efficiently the heat released from the RPV through as much radiation as possible. Employing air as the working fluid and ambient air as the ultimate heat sink, the RCCS design can strongly reduce the possibility of losing the working fluid and the heat sink for decay-heat-removal. Moreover, the authors started experiment research with using a scaled-down heat-removal test facility. Therefore, this study propose a comparative methodology between an actual RCCS and a scaled-down heat-removal test facility.
Yamano, Hidemasa; Takai, Toshihide; Furukawa, Tomohiro; Kikuchi, Shin; Emura, Yuki; Kamiyama, Kenji; Fukuyama, Hiroyuki*; Higashi, Hideo*; Nishi, Tsuyoshi*; Ota, Hiromichi*; et al.
Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.418 - 427, 2019/09
Eutectic reactions between boron carbide (BC) and stainless steel (SS) as well as its relocation are one of the key issues in a core disruptive accident (CDA) evaluation in sodium-cooled fast reactors. Since such behaviors have never been simulated in CDA numerical analyses, it is necessary to develop a physical model and incorporate the model into the CDA analysis code. This study is focusing on BC-SS eutectic melting experiments, thermophysical property measurement of the eutectic melt, and physical model development for the eutectic melting reaction. The eutectic experiments involve the visualization experiments, eutectic reaction rate experiments and material analyses. The thermophysical properties are measured in the range from solid to liquid state. The physical model is developed for a severe accident computer code based on the measured data of the eutectic reaction rate and the physical properties. This paper describes the project overview and progress of experimental and analytical studies by 2017. Specific results in this paper is boron concentration distributions of solidified BC-SS eutectic sample in the eutectic melting experiments, which would be used for the validation of the eutectic physical model implemented into the computer code.
CLiu, X.*; Morita, Koji*; Yamano, Hidemasa
Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.47 - 51, 2019/09
Investigation of the eutectic reaction in a core disruptive accident of sodium cooled reactor is of importance since reactor criticality will be affected by the change in reactivity after eutectic reaction. In this study, we performed 1st step of validation analysis using a fast reactor safety analysis code, SIMMER-III, with the developed model based on a new series of experiments, where a BC pellet was immersed into a molten stainless steel (SS) pool. The simulation results showed the general behavior of eutectic material formation measured in the experiments reasonably. The eutectic reaction consumes solid BC and liquid SS, and then the liquid eutectic composition is produced at the early stage of reaction due to the high temperature of molten SS. Movement of the eutectic material in the molten pool leads to the redistribution of boron element. Molten SS pool then freezes to solid SS and movement of eutectic material is stopped by surrounding solid SS. Boron concentration in the pool was measured after molten SS freezes into a solid. Simulation results indicate that boron tends to accumulate in the upper part of the molten pool. This is attributed to the buoyancy force acting on lighter boron in the molten SS pool. A parametric study was also conducted by changing the initial temperature of BC pellet and SS to investigate the temperature sensitivity on the eutectic reaction behavior.
