Beam commissioning of the linac for iBNCT

Naito, Fujio*; Anami, Shozo*; Ikegami, Kiyoshi*; Uota, Masahiko*; Ouchi, Toshikatsu*; Onishi, Takahiro*; Oba, Toshiyuki*; Obina, Takashi*; Kawamura, Masato*; Kumada, Hiroaki*; et al.

Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1244 - 1246, 2016/11

http://www.pasj.jp/web_publish/pasj2016/proceedings/PDF/TUP1/TUP118.pdf

The proton linac installed in the Ibaraki Neutron Medical Research Center is used for production of the intense neutron flux for the Boron Neutron Capture Therapy (BNCT). The linac consists of the 3-MeV RFQ and the 8-MeV DTL. Design average beam current is 10mA. Target is made of Beryllium. First neutron production from the Beryllium target was observed at the end of 2015 with the low intensity beam as a demonstration. After the observation of neutron production, a lot of improvement s was carried out in order to increase the proton beam intensity for the real beam commissioning. The beam commissioning has been started on May 2016. The status of the commissioning is summarized in this report.

Development of a high-brightness and high-current electron gun for high-flux -ray generation

Nishimori, Nobuyuki; Nagai, Ryoji; Matsuba, Shunya; Hajima, Ryoichi; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Uchiyama, Takashi*; Kuriki, Masao*

Nuclear Physics and -ray sources for Nuclear Security and Nonproliferation, p.321 - 326, 2014/12

https://doi.org/10.1142/9789814635455_0038

Generation of a 500-keV electron beam with milliampere current from a photoemission DC gun

Nishimori, Nobuyuki; Nagai, Ryoji; Matsuba, Shunya; Hajima, Ryoichi; Yamamoto, Masahiro*; Miyajima, Tsukasa*; Honda, Yosuke*; Uchiyama, Takashi*; Iijima, Hokuto*; Kuriki, Masao*; et al.

Proceedings of 10th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.174 - 178, 2014/06

http://www.pasj.jp/web_publish/pasj10/proceedings/PDF/MOOT/MOOT03.pdf

no abstracts in English

Progress in a photocathode DC gun at the compact ERL

Nishimori, Nobuyuki; Nagai, Ryoji; Matsuba, Shunya; Hajima, Ryoichi; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*

Proceedings of 35th International Free-Electron Laser Conference (FEL 2013) (Internet), p.184 - 188, 2013/08

http://epaper.kek.jp/FEL2013/papers/tuocno03.pdf

Generation of a 500-keV electron beam from a high voltage photoemission gun

Nishimori, Nobuyuki; Nagai, Ryoji; Matsuba, Shunya; Hajima, Ryoichi; Yamamoto, Masahiro*; Miyajima, Tsukasa*; Honda, Yosuke*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*

Applied Physics Letters, 102(23), p.234103_1 - 234103_4, 2013/06

https://doi.org/10.1063/1.4811158

Development of a photoemission DC Gun at JAEA

Nishimori, Nobuyuki; Nagai, Ryoji; Matsuba, Shunya; Hajima, Ryoichi; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*; et al.

Proceedings of 34th International Free Electron Laser Conference (FEL 2012) (Internet), p.161 - 164, 2012/08

http://accelconf.web.cern.ch/accelconf/FEL2012/papers/mopd53.pdf

Development of a 500-kV photocathode DC gun for ERLs

Nishimori, Nobuyuki; Nagai, Ryoji; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*; Okumi, Shoji*; Nakanishi, Tsutomu*; et al.

Journal of Physics; Conference Series, 298, p.012005_1 - 012005_6, 2011/06

https://doi.org/10.1088/1742-6596/298/1/012005

High-voltage test of a 500-KV photocathode DC electron-gun for a next-generation light-source

Nagai, Ryoji; Nishimori, Nobuyuki; Hajima, Ryoichi; Muto, Toshiya*; Yamamoto, Masahiro*; Miyajima, Tsukasa*; Honda, Yosuke*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*; et al.

Proceedings of 7th Annual Meeting of Particle Accelerator Society of Japan (DVD-ROM), p.806 - 808, 2010/08

http://www.pasj.jp/web_publish/pasj7/proceedings/P_5PM/P_EH_5PM/THPS014.pdf

A 500-kV, 10-mA photocathode DC gun which is designed for next-generation light- sources based on energy-recovery linac has been developed in a collaboration effort of JAEA, KEK, Hiroshima University and Nagoya University. We have utilized a segmented cylindrical ceramic insulator and guard-ring electrodes to prevent any damage to the insulator from electrons emitted by the support-rod electrode. The 500-kV gun was successfully conditioned up to a voltage of 550 kV and a long-time holding test for 8 h was demonstrated at an acceleration voltage of 500 kV. The cathode electrode, anode electrode, and beam line apparatuses are now under fabrication and beam tests of the gun will be started soon.

Basic vacuum test of 500-kV photocathode DC gun components at KEK

Yamamoto, Masahiro*; Uchiyama, Takashi*; Miyajima, Tsukasa*; Honda, Yosuke*; Sato, Kotaro*; Matsuba, Shunya*; Saito, Yoshio*; Kobayashi, Masanori*; Kurisu, Hiriki*; Hajima, Ryoichi; et al.

Proceedings of 7th Annual Meeting of Particle Accelerator Society of Japan (DVD-ROM), p.717 - 720, 2010/08

http://www.pasj.jp/web_publish/pasj7/proceedings/P_4PM/P_EH_4PM/WEPS124.pdf

A 500-kV photocathode DC electron gun which can supply the beam of a low emittance and a high average current has been developed in collaboration with KEK, JAEA, Hiroshima Univ., Nagoya Univ. and Yamaguchi Univ. The vacuum of the gun chamber has to be lower Extreme High Vacuum for maintain cathode-life time. A titanium chamber and new material of ceramic were employed to reduce outgassing rate. The result of outgassing rate of the gun chamber is described in this report.

High-voltage test of a 500-kV photocathode DC gun for the ERL light sources in Japan

Nagai, Ryoji; Hajima, Ryoichi; Nishimori, Nobuyuki; Muto, Toshiya*; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Kuriki, Masao*; Iijima, Hokuto*; Kuwahara, Makoto*; et al.

Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2341 - 2343, 2010/05

http://accelconf.web.cern.ch/AccelConf/IPAC10/papers/tupe093.pdf

A 500-kV, 10-mA photocathode DC gun has been developed in a collaboration effort of JAEA, KEK, Hiroshima University and Nagoya University. We have utilized a segmented cylindrical ceramic insulator and guard-ring electrodes to prevent any damage to the insulator from electrons emitted by the support-rod electrode. The high-voltage test of the gun has been successfully done with up to 550 kV. The cathode electrode, anode electrode, and beam line apparatuses are now under fabrication. A beam test of the gun will be started soon. The high-voltage test and up-to-date status of the gun development will be presented in detail.