Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamashita, Takuya; Shimomura, Kenta; Nagae, Yuji; Yamaji, Akifumi*; Mizokami, Shinya; Mitsugi, Takeshi; Koyama, Shinichi
Hairo, Osensui, Shorisui Taisaku Jigyo Jimukyoku Homu Peji (Internet), 53 Pages, 2023/10
JAEA performed the subsidy program for the "Project of Decommissioning, Contaminated Water and Treated Water Management (Development of Analysis and Estimation Technologies for Characterization of Fuel Debris (Development of Estimation Technologies of RPV Damaged Condition, etc.) in 2022JFY. This presentation summarized briefly the results of the project, which will be available shortly on the website of Management Office for the Project of Decommissioning, Contaminated Water and Treated Water Management.
Kazama, Hiroyuki; Konashi, Kenji*; Suzuki, Tatsuya*; Koyama, Shinichi; Maeda, Koji; Sekio, Yoshihiro; Onishi, Takashi; Abe, Chikage*; Shikamori, Yasuyuki*; Nagai, Yasuyoshi*
Journal of Analytical Atomic Spectrometry, 38(8), p.1676 - 1681, 2023/07
Times Cited Count:0 Percentile:0.02(Chemistry, Analytical)Ikeuchi, Hirotomo; Koyama, Shinichi; Osaka, Masahiko; Takano, Masahide; Nakamura, Satoshi; Onozawa, Atsushi; Sasaki, Shinji; Onishi, Takashi; Maeda, Koji; Kirishima, Akira*; et al.
JAEA-Technology 2022-021, 224 Pages, 2022/10
A set of technology, including acid dissolving, has to be established for the analysis of content of elements/nuclides in the fuel debris samples. In this project, a blind test was performed for the purpose of clarifying the current level of analytical accuracy and establishing the alternative methods in case that the insoluble residue remains. Overall composition of the simulated fuel debris (homogenized powder having a specific composition) were quantitatively determined in the four analytical institutions in Japan by using their own dissolving and analytical techniques. The merit and drawback for each technique were then evaluated, based on which a tentative flow of the analyses of fuel debris was constructed.
Kurata, Masaki; Okuzumi, Naoaki*; Nakayoshi, Akira; Ikeuchi, Hirotomo; Koyama, Shinichi
Journal of Nuclear Science and Technology, 59(7), p.807 - 834, 2022/07
Times Cited Count:11 Percentile:95.93(Nuclear Science & Technology)Immediately after the 1F-accident, various attempts have been made to evaluate the fuel debris characteristics toward the decommissioning of 1F. The present review outlines those attempts. In the years immediately following the 1F-accident, the knowledge obtained from the 1F-site (especially from the damaged reactors of Units 1, 2 and 3) was extremely limited. The approximate location of fuel debris was investigated by muon tomography, and its characteristics were roughly estimated based on the past findings such as the results of the Three Mile Island-II accident investigation in the United States, which gave us information of prototypical accident scenarios and debris characteristics for pressurized water reactor accident. After that, various internal investigation robots were developed, and from 2017, investigation of the inside of the reactor containment vessel was started using these robots. Consequently, these three units were found to have core damage status and debris distribution that were rather different from what had been expected based on the typical accident scenario of a pressurized water reactor. In parallel, a small amount of U-bearing particle was recovered from the smear samples of these robots. The analysis of these particles is ongoing to get information relevant to fuel debrsi body. Furthermore, international collaboration is ongoing mainly under OECD/NEA, including accident analysis and debris characterization. From now on, one need to further understand 1F-accident scenario and progress debris characterization based on these 1F-site information.
Koyama, Shinichi; Nakagiri, Toshio; Osaka, Masahiko; Yoshida, Hiroyuki; Kurata, Masaki; Ikeuchi, Hirotomo; Maeda, Koji; Sasaki, Shinji; Onishi, Takashi; Takano, Masahide; et al.
Hairo, Osensui Taisaku jigyo jimukyoku Homu Peji (Internet), 144 Pages, 2021/08
JAEA performed the subsidy program for the "Project of Decommissioning and Contaminated Water Management (Development of Analysis and Estimation Technology for Characterization of Fuel Debris (Development of Technologies for Enhanced Analysis Accuracy and Thermal Behavior Estimation of Fuel Debris))" in 2020JFY. This presentation summarized briefly the results of the project, which will be available shortly on the website of Management Office for the Project of Decommissioning and Contaminated Water Management.
Onishi, Takashi; Koyama, Shinichi; Mimura, Hitoshi*
Nihon Ion Kokan Gakkai-Shi, 31(3), p.43 - 49, 2020/10
Onishi, Takashi; Sekioka, Ken*; Suto, Mitsuo*; Tanaka, Kosuke; Koyama, Shinichi; Inaba, Yusuke*; Takahashi, Hideharu*; Harigai, Miki*; Takeshita, Kenji*
Energy Procedia, 131, p.151 - 156, 2017/12
Times Cited Count:11 Percentile:98.3(Energy & Fuels)no abstracts in English
Kihara, Yoshiyuki; Tanaka, Kosuke; Koyama, Shinichi; Yoshimochi, Hiroshi; Seki, Takayuki; Katsuyama, Kozo
NEA/NSC/R(2017)3, p.341 - 350, 2017/11
In order to investigate the effect of the addition of americium to MOX fuels on the irradiation behaviour, the "Am-1" program is being conducted at the JAEA. The Am-1 program consists of two short-term irradiation tests of 10-min and 24-h irradiation periods, and a steady-state irradiation test. The short-term irradiation tests and their post irradiation examinations (PIEs) have been successfully completed. To date, the data for PIE of the Am-MOX fuels focused on the microstructural evolution and redistribution behaviour of Am at the initial stage of irradiation have been obtained and reported. In this paper, the results obtained from the Am-1 program are reviewed and detailed descriptions of the fabrication and inspection techniques for the Am-MOX fuels prepared for the program are provided. PIE data for the Am-MOX fuels at the initial stage of irradiation have been accumulated. In this paper, unpublished PIE data for the Am-MOX fuels are also presented.
Onishi, Takashi; Tanaka, Kosuke; Koyama, Shinichi; Ou, L. Y.*; Mimura, Hitoshi*
NEA/NSC/R(2017)3, p.463 - 469, 2017/11
no abstracts in English
Sugaya, Yuki; Sakazume, Yoshinori; Akutsu, Hideyuki; Inoue, Toshihiko; Yoshimochi, Hiroshi; Sato, Soichi; Koyama, Tomozo; Nakayama, Shinichi
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 8 Pages, 2017/00
The Japan Atomic Energy Agency has been developing the research and development facilities, "Okuma Analysis and Research Center", in order to ascertain the properties of radioactive wastes and fuel debris towards the decommissioning of TEPCO's Fukushima Daiichi Nuclear Power Station. This paper outlines the concept of "Laboratory-1" which will analyze low and medium level samples in the Okuma Analysis and Research Center with a focus on the research plan.
Ito, Masayasu; Ogawa, Miho; Inoue, Toshihiko; Yoshimochi, Hiroshi; Koyama, Shinichi; Koyama, Tomozo; Nakayama, Shinichi
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 7 Pages, 2017/00
Laboratory-2 of the Okuma Analysis and Research Center will be used for the technological development of techniques to treat and dispose fuel debris, etc. The specific analytical content and its importance has been discussed by an experts committee in FY 2016. The committee regarded fuel debris retrieval and criticality control related topics as the most important content. As a result, it will be a priority to introduce equipment to perform examination such as shape and size measurement, compositional and nuclide analysis, hardness and toughness test, and radiation dose rate measurement. In addition, since sample will have high dose rates (1 Sv/h or more) at the time of reception, hot cells with enough radiation shielding ability will be used. In the hot cell, the pre-processing will be performed, such as cutting and dissolution of samples. Processed samples will be examined in concrete cells, steel cells, glove boxes and fume hoods. Detail design of Laboratory-2 started on FY 2017.
Inoue, Toshihiko; Ogawa, Miho; Sakazume, Yoshinori; Yoshimochi, Hiroshi; Sato, Soichi; Koyama, Shinichi; Koyama, Tomozo; Nakayama, Shinichi
Proceedings of 54th Annual Meeting of Hot Laboratories and Remote Handling (HOTLAB 2017) (Internet), 7 Pages, 2017/00
Decommissioning of TEPCO's 1F is in progress according to the Roadmap. The Roadmap assigned the construction of a hot laboratory and analysis to the JAEA. The hot laboratory, Okuma Analysis and Research Center consists of the three buildings; Administrative building, the Laboratory-1 and Laboratory-2. The Laboratory-1 and Laboratory-2 are hot laboratories. Laboratory-1 is for radiometric analysis of low and medium level radioactive rubble and secondary wastes. The license of the Laboratory-1's implementation was approved by The Secretariat of the Nuclear Regulation Authority and the construction started in April 2017 and plans an operational start in 2020. Laboratory-2 provides concrete cells, steel cells for the analysis of the fuel debris and high level radioactive rubble. The Laboratory-2's major analysis items is reviewed by review meeting organized of cognoscente.
Tanaka, Kosuke; Sasaki, Shinji; Katsuyama, Kozo; Koyama, Shinichi
Transactions of the American Nuclear Society, 113(1), p.619 - 621, 2015/10
In order to evaluate the microstructural change behavior of Am-MOX fuels at the initial stage of irradiation, detailed investigations using image analysis were performed on X-ray Computed Tomography (X-ray CT) images and on ceramographs from fuels irradiated in both B11 and B14.
Sato, Isamu; Tanaka, Kosuke; Koyama, Shinichi; Matsushima, Kenichi*; Matsunaga, Junji*; Hirai, Mutsumi*; Endo, Hiroshi*; Haga, Kazuo*
Energy Procedia, 82, p.86 - 91, 2015/07
Times Cited Count:2 Percentile:17.57(Nuclear Science & Technology)Experiments simulating overheating conditions of fast reactor severe accidents have been previously carried out with irradiated fuels. For the present study, the chemical forms of the fission products (FPs) included in the irradiated fuels were evaluated by thermochemical equilibrium calculations. At temperatures of 2773 K and 2973 K, the most stable forms of Cs, I, Te, Sb, Pd and Ag are gaseous compounds. Cs and Sb detected in the thermal gradient tube (TGT) in the experiments can take gaseous chemical forms of elemental Cs, CsI, CsMoO, CsO and elemental Sb, SbO, SbTe, respectively. By comparing experimental results and the estimations, it is seen CsI thermochemically behaves in a manner that traps it in the TGT, while elemental Cs trends to move as fine particles. The moving behavior of the gaseous FPs will obey not only thermochemical principles, but also those of particle dynamics.
Onishi, Takashi; Koyama, Shinichi; Mimura, Hitoshi*
Progress in Nuclear Energy, 82, p.69 - 73, 2015/07
Times Cited Count:6 Percentile:45.92(Nuclear Science & Technology)no abstracts in English
Sato, Isamu; Onishi, Takashi; Tanaka, Kosuke; Iwasaki, Maho; Koyama, Shinichi
Journal of Nuclear Materials, 461, p.22 - 28, 2015/06
We observed one of the simplified processes by conducting primitive experiments. CsI was heated at 1323 K to be vaporized and deposited on sampling parts with a temperature range of 1023 - 423 K and then BO was vaporized at 1973 K to be reacted with Cs/I there. After heating tests, each sampling part was soaked into alkali water to dissolve the surface-deposits for ICP-MS analysis. The results showed that CsI deposited at the sampling parts kept above approx. 850 K was striped by BO vapour. This behaviour will be thermodynamically discussed to study the Cs/I/B chemistry in the severe accidents.
Sato, Isamu; Onishi, Takashi; Tanaka, Kosuke; Iwasaki, Maho; Koyama, Shinichi
Journal of Nuclear Materials, 461, p.22 - 28, 2015/06
Times Cited Count:8 Percentile:56.13(Materials Science, Multidisciplinary)In order to evaluate B influence on the release and transport of Cs and I during severe accidents, basic experiments have been performed on the interaction between deposited Cs/I compounds and vapor/aerosol B compounds. CsI and BO were utilized as a Cs/I compound and a B compound, respectively. Deposited CsI on the thermal gradient tube (TGT), which is exposed to temperatures ranging from 423 K to 1023 K was reacted with vapor/aerosol BO, and then observed to determine how it changed Cs/I decomposition profiles. As a result, vapor/aerosol BO stripped a portion of deposited CsI within a temperature range from 830 K to 920 K to make gaseous CsBO and I. In addition, gaseous I was re-deposited at a temperature range from 530 K to 740 K, while CsBO travelled through the sampling tubes and filters without deposition. It is implied that B influences Cs carriers such as CsBO to transport Cs to the colder regions.
Tanaka, Kosuke; Yoshimochi, Hiroshi; Obayashi, Hiroshi; Koyama, Shinichi
Energy Procedia, 71, p.282 - 292, 2015/05
Times Cited Count:2 Percentile:83.55(Energy & Fuels)Americium-containing MOX (Am-MOX) fuels were subjected to heating tests using thermogravimetric and differential thermal analysis (TG-DTA) measurements in a flowing gas atmosphere of dry air to investigate the effect of Am addition on oxidation behavior of MOX fuel.
Sato, Isamu; Maeda, Koji; Suto, Mitsuo; Osaka, Masahiko; Usuki, Toshiyuki; Koyama, Shinichi
Journal of Nuclear Science and Technology, 52(4), p.580 - 587, 2015/04
Times Cited Count:6 Percentile:45.92(Nuclear Science & Technology)Penetration behavior of radionuclides such as Cs into dried concrete material, dried mortar material and epoxy paint for a few dozen days was observed using a solution containing fission products extracted from irradiated fuels to obtain fundamental information on the radionuclide penetration rate and depth. Hardly any radionuclides could penetrate into the epoxy paint. The radionuclide solution penetrated into concrete and mortar materials to a depth of a few millimeters for a few dozen days. The penetration behavior observed near the surface of concrete and mortar materials was similar to the diffusion of nuclides in media such as water-saturated concrete, bentonite and cement materials.
Onishi, Takashi; Koyama, Shinichi; Masud, R. S.*; Kawamura, Takuya*; Mimura, Hitoshi*; Niibori, Yuichi*
Nihon Ion Kokan Gakkai-Shi, 25(4), p.220 - 227, 2014/11
no abstracts in English