Research plan on geosphere stability for long-term isolation of radioactive waste (Scientific program for fiscal year 2023)

Niwa, Masakazu; Shimada, Koji; Sueoka, Shigeru; Fujita, Natsuko; Yokoyama, Tatsunori; Ogita, Yasuhiro; Fukuda, Shoma; Nakajima, Toru; Kagami, Saya; Ogata, Manabu; et al.

JAEA-Review 2023-017, 27 Pages, 2023/10

JAEA-Review-2023-017.pdf:0.94MB

This report is a plan of research and development (R&D) on geosphere stability for long-term isolation of high-level radioactive waste (HLW) in Japan Atomic Energy Agency (JAEA), in fiscal year 2023. The objectives and contents in fiscal year 2023 are described in detail based on the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028). In addition, the background of this research is described from the necessity and the significance for site investigation and safety assessment, and the past progress. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques.

A Novel method for processing noisy magnetotelluric data based on independence of signal sources and continuity of response functions

Ogawa, Hiroki; Asamori, Koichi; Negi, Tateyuki*; Ueda, Takumi*

Journal of Applied Geophysics, 213, p.105012_1 - 105012_17, 2023/06

https://doi.org/10.1016/j.jappgeo.2023.105012

A number of schemes for processing magnetotelluric (MT) data have been reported aiming at suppressing the strong effect of artificial electromagnetic noise, especially coherent noise that is correlated between electric and magnetic time series. Many of the recent denoising schemes are based on decomposing MT data into the responses of the natural signal and noise. Meanwhile, it is crucial to distinguish the natural signal from noise stably without depending on any empirical choice of parameter setting. In addition, improper subtraction of values from the separated signal can lead to the loss of useful values of the natural signal or missing noise-affected values, which may result in failure in deriving the true MT responses. We propose a novel data-processing method that applies frequency-domain independent component analysis (FDICA) to both the local MT data and the reference magnetic data. Among the separated signal, the proposed method can quantitatively distinguish the natural signal from the noise-affected components by calculating the ratio of cross-power spectrum with the reference data to the auto-power spectrum for each component. When determining which values to subtract from the separated signal, we introduce an evaluation index with respect to two characteristics of the MT response function: stationary in the time domain and smoothness in the frequency domain. We conduct the experiments both with MT time series severely contaminated by synthetic coherent noises and with MT field data interfered with DC (direct current) railways. Consequently, we confirm the superiority of the proposed method in the noise-suppression performance over the conventional methods of MT data processing.

A Proposal of optimum calculation settings of continuous wavelet transform in magnetotelluric data processing

Ogawa, Hiroki; Hama, Yuki*; Asamori, Koichi; Ueda, Takumi*

Butsuri Tansa, 75, p.38 - 55, 2022/00

https://doi.org/10.3124/segj.75.38

In the magnetotelluric (MT) method, so as to identify the subsurface resistivity structure, the apparent resistivity and phase profiles are calculated by transforming time-series data into spectral data. The continuous wavelet transform (CWT) is well known as a new method of time-frequency analysis instead of the short-time Fourier transform. The CWT is superior in processing non-stationary wideband signals like the MT signal by adjusting the size of the wavelet according to the value of frequency. However, the calculation settings of the CWT, such as the type of basis function and the wavelet parameter, are often determined empirically because of the arbitrariness of the shape of the wavelet. Although there might be differences between the calculated MT responses and the true responses due to improper settings of the CWT, there are no detailed studies considering the effect of numerical errors derived from spectral transforms on MT data. In this study, focusing on the frequency band between 0.001 Hz and 1 Hz, we examined the optimum calculation settings of the CWT in processing MT data in terms of suppressing the numerical errors caused by the spectral transform of time-series data. We also show the validity of the proposed calculation settings by applying the CWT to MT survey data of different types. Superiority of the CWT with proposed settings is suggested especially when the signal-to-noise ratio of observed data is low. Consequently, the proposed calculation settings were confirmed to strike a balance between the resolutions of the time and frequency domains well and will therefore be effective in obtaining reliable MT responses.

Annual report for research on geosphere stability for long-term isolation of radioactive waste in fiscal year 2020

Ishimaru, Tsuneari; Ogata, Nobuhisa; Kokubu, Yoko; Shimada, Koji; Niwa, Masakazu; Shimada, Akiomi; Watanabe, Takahiro; Sueoka, Shigeru; Yokoyama, Tatsunori; Fujita, Natsuko; et al.

JAEA-Research 2021-007, 65 Pages, 2021/10

JAEA-Research-2021-007.pdf:4.21MB

This annual report documents the progress of research and development (R&D) in the 6th fiscal year during the JAEA 3rd Mid- and Long-term Plan (fiscal years 2015-2021) to provide the scientific base for assessing geosphere stability for long-term isolation of the high-level radioactive waste. The planned framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. The current status of R&D activities with previous scientific and technological progress is summarized.

Annual report for research on geosphere stability for long-term isolation of radioactive waste in fiscal year 2018

Ishimaru, Tsuneari; Ogata, Nobuhisa; Hanamuro, Takahiro; Shimada, Akiomi; Kokubu, Yoko; Asamori, Koichi; Niwa, Masakazu; Shimada, Koji; Watanabe, Takahiro; Saiga, Atsushi; et al.

JAEA-Research 2019-006, 66 Pages, 2019/11

JAEA-Research-2019-006.pdf:4.39MB

This annual report documents the progress of research and development (R&D) in the 4th fiscal year during the JAEA 3rd Mid- and Long-term Plan (fiscal years 2015-2021) to provide the scientific base for assessing geosphere stability for long-term isolation of the high-level radioactive waste. The planned framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. In this report, the current status of R&D activities with previous scientific and technological progress is summarized.

Annual report for research on geosphere stability for long-term isolation of radioactive waste in fiscal year 2017

Ishimaru, Tsuneari; Ogata, Nobuhisa; Shimada, Akiomi; Asamori, Koichi; Kokubu, Yoko; Niwa, Masakazu; Watanabe, Takahiro; Saiga, Atsushi; Sueoka, Shigeru; Komatsu, Tetsuya; et al.

JAEA-Research 2018-015, 89 Pages, 2019/03

JAEA-Research-2018-015.pdf:14.43MB

This annual report documents the progress of research and development (R&D) in the 3rd fiscal year during the JAEA 3rd Mid- and Long-term Plan (fiscal years 2015-2021) to provide the scientific base for assessing geosphere stability for long-term isolation of the high-level radioactive waste. The planned framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. In this report, the current status of R&D activities with previous scientific and technological progress is summarized.

Annual report for research on geosphere stability for long-term isolation of radioactive waste in fiscal year 2016

Ishimaru, Tsuneari; Yasue, Kenichi*; Asamori, Koichi; Kokubu, Yoko; Niwa, Masakazu; Watanabe, Takahiro; Yokoyama, Tatsunori; Fujita, Natsuko; Saiga, Atsushi; Shimizu, Mayuko; et al.

JAEA-Research 2018-008, 83 Pages, 2018/12

JAEA-Research-2018-008.pdf:11.43MB

This annual report documents the progress of research and development (R&D) in the 2nd fiscal year during the JAEA 3rd Mid- and Long-term Plan (fiscal years 2015-2021) to provide the scientific base for assessing geosphere stability for long-term isolation of the high-level radioactive waste. The planned framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. In this paper, the current status of R&D activities with previous scientific and technological progress is summarized.

Welding technology on sector assembly of the JT-60SA vacuum vessel

Shibama, Yusuke; Okano, Fuminori; Yagyu, Junichi; Kaminaga, Atsushi; Miyo, Yasuhiko; Hayakawa, Atsuro*; Sagawa, Keiich*; Mochida, Tsutomu*; Morimoto, Tamotsu*; Hamada, Takashi*; et al.

Fusion Engineering and Design, 98-99, p.1614 - 1619, 2015/10

https://doi.org/10.1016/j.fusengdes.2015.06.072

The JT-60SA vacuum vessel (150 tons) is a double wall torus structure and the maximum major radius of 5.0 m and height of 6.6 m. The manufacturing design concept is that the vessel is split in the 10 toroidal sectors manufactured at factory, and assembled on-site; seven of the 40-degree sectors, two of the 30-degree beside final one, and the final of the 20-degree. The final sector is assembled with the VV thermal shield and toroidal field magnets into the 340-degree as prepared in one sector. Sectors are temporally fitted on-site and adjusted one over the other before the assembly. After measurement of the dimensions and the reference, these sectors are transferred onto the cryostat base. First, three 80-degree sectors are manufactured with mating each 40-degree sector by direct joint welding. The rest sectors including the final sector are jointed with splice plates. Welding manipulator and its guide rails are used for these welding. In this paper, the detail of the VV sectors assembly including the final sector is explained. Welding technologies to joint the two of 40-degree sectors are reported with the present manufacturing status and the welding trial on the vertical stub with the partial mock-up of the final sector are discussed with the assembly process.

SiO desorption kinetics of Si(111) surface oxidation studied by real-time photoelectron spectroscopy

Tang, J.*; Nishimoto, Kiwamu*; Ogawa, Shuichi*; Yoshigoe, Akitaka; Ishizuka, Shinji*; Watanabe, Daiki*; Teraoka, Yuden; Takakuwa, Yuji*

e-Journal of Surface Science and Nanotechnology (Internet), 11, p.116 - 121, 2013/11

https://doi.org/10.1380/ejssnt.2013.116

Observation of graphene-on-diamond formation studied by real-time photoelectron spectroscopy

Ogawa, Shuichi*; Yamada, Takatoshi*; Ishizuka, Shinji*; Watanabe, Daiki*; Yoshigoe, Akitaka; Hasegawa, Masataka*; Teraoka, Yuden; Takakuwa, Yuji*

Hyomen Kagaku, 33(8), p.449 - 454, 2012/08

https://doi.org/10.1380/jsssj.33.449

Graphene-on-insulator structures are required for fabrication of the graphene transistor. Diamond has been attracted as the substrate for graphene growth because it has a larger band gap and break down voltage compared with SiC. The detail of graphitization on a diamond surface has not been clarified yet because the nondestructive evaluation for graphene-on-diamond (GOD) structure was hard. In this study, we have developed an evaluation method of GOD based on the photoemission spectroscopy using synchrotron radiation focusing the shift of photoelectron spectra due to band bending. We can clearly determine the graphitization temperature on the diamond C(111) surface as approximately 1120 K, which is lower than that on an SiC substrate. It is also confirmed from C 1s photoelectron spectra, there is the buffer layer at the interface between the grapheme layer and the diamond substrate.