Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Fujihara, Hiro*; Toda, Hiroyuki*; Ebihara, Kenichi; Kobayashi, Masakazu*; Mayama, Tsuyoshi*; Hirayama, Kyosuke*; Shimizu, Kazuyuki*; Takeuchi, Akihisa*; Uesugi, Masayuki*
International Journal of Plasticity, 174, p.103897_1 - 103897_22, 2024/03
Times Cited Count：0Hydrogen(H) embrittlement in high-strength aluminum(Al) alloys is a crucial problem. H accumulation at the interface of precipitates in Al alloy is considered to cause embrittlement. However, there is no quantitative knowledge regarding the interaction between H distribution and stress field near cracks. In this study, using a multi-modal three-dimensional image-based simulation combining the crystal plasticity finite element method and H diffusion analysis, we tried to capture the stress distribution near the crack, its influence on the H distribution, and the probability of crack initiation in the experimental condition. As a result, it was found that grain boundary cracks transition to quasi-cleavage cracks in the region where the cohesive energy of the semi-coherent interface of MgZn
precipitates decreases due to H accumulation near the tip. We believe the present simulation method successfully bridges nanoscale delamination and macroscale brittle fracture.
Higa, Ryota*; Fujihara, Hiro*; Toda, Hiroyuki*; Kobayashi, Masakazu*; Ebihara, Kenichi; Takeuchi, Akihisa*
Keikinzoku, 73(11), p.530 - 536, 2023/11
In Al-Zn-Mg alloys, suppression of hydrogen embrittlement is necessary to improve their strength. In this study, the distribution of stress, strain, and hydrogen concentration in the actual fracture region was investigated using the crystal plasticity finite element method and hydrogen diffusion analysis based on a model derived from three-dimensional polycrystalline microstructural data obtained by X-ray CT. In addition, the distributions of stress, strain, and hydrogen concentration were compared with the actual crack initiation behavior by combining in-situ observation of tensile tests using X-ray CT and simulation. The results show that stress loading perpendicular to the grain boundary due to crystal plasticity dominates grain boundary crack initiation. It was also found that internal hydrogen accumulation due to crystal plasticity has little effect on crack initiation.
OKondo, Yosuke*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; Baba, Hidetada*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.
Nature, 620(7976), p.965 - 970, 2023/08
Times Cited Count：5 Percentile：92.64(Multidisciplinary Sciences)no abstracts in English
Ne at the transition into the island of inversion; Detailed structure study of NeWang, H.*; Yasuda, Masahiro*; Kondo, Yosuke*; Nakamura, Takashi*; Tostevin, J. A.*; Ogata, Kazuyuki*; Otsuka, Takaharu*; Poves, A.*; Shimizu, Noritaka*; Yoshida, Kazuki; et al.
Physics Letters B, 843, p.138038_1 - 138038_9, 2023/08
Times Cited Count：2 Percentile：68.16(Astronomy & Astrophysics)Detailed 
-ray spectroscopy of the exotic neon isotope Ne has been performed using the one-neutron removal reaction from Ne. Based on an analysis of parallel momentum distributions, a level scheme with spin-parity assignments has been constructed for Ne and the negative-parity states are identified for the first time. The measured partial cross sections and momentum distributions reveal a significant intruder p-wave strength providing evidence of the breakdown of the N = 20 and N = 28 shell gaps. Only a weak, possible f-wave strength was observed to bound final states. Large-scale shell-model calculations with different effective interactions do not reproduce the large p-wave and small f-wave strength observed experimentally, indicating an ongoing challenge for a complete theoretical description of the transition into the island of inversion along the Ne isotopic chain.
Nakajima, Junya; Hirota, Seiko*; Tsuji, Tomoya; Watanabe, Yuki; Sakoda, Akihiro; Kobayashi, Noriko*
Hoken Butsuri (Internet), 58(1), p.13 - 20, 2023/04
no abstracts in English
molecular dynamics simulations reveal the hydration structure of the radium(II) ionYamaguchi, Akiko; Nagata, Kojiro*; Kobayashi, Keita; Tanaka, Kazuya; Kobayashi, Toru; Tanida, Hajime; Shimojo, Kojiro; Sekiguchi, Tetsuhiro; Kaneta, Yui; Matsuda, Shohei; et al.
iScience (Internet), 25(8), p.104763_1 - 104763_12, 2022/08
Times Cited Count：9 Percentile：68.46(Multidisciplinary Sciences)no abstracts in English
Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.
Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07
This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.
Matsuda, Shohei; Yokoyama, Keiichi; Yaita, Tsuyoshi; Kobayashi, Toru; Kaneta, Yui; Simonnet, M.; Sekiguchi, Tetsuhiro; Honda, Mitsunori; Shimojo, Kojiro; Doi, Reisuke; et al.
Science Advances (Internet), 8(20), p.eabn1991_1 - eabn1991_11, 2022/05
Times Cited Count：6 Percentile：58.16(Multidisciplinary Sciences)no abstracts in English
Sueoka, Shigeru; Kobayashi, Yumi*; Fukuda, Shoma; Kohn, B. P.*; Yokoyama, Tatsunori; Sano, Naomi*; Hasebe, Noriko*; Tamura, Akihiro*; Morishita, Tomoaki*; Tagami, Takahiro*
Tectonophysics, 828, p.229231_1 - 229231_17, 2022/04
Times Cited Count：1 Percentile：22.72(Geochemistry & Geophysics)The South Fossa Magna zone, central Japan, has been an active collision zone between the Honshu Arc and the Izu-Bonin Arc since the middle Miocene and provides an excellent setting for reconstructing the earliest stages of continent formation. Multi-system geo-thermochronometry was applied to different domains of the South Fossa Magna zone, together with some previously published data, to reveal mountain formation processes, i.e., vertical crustal movements. Nine granitic samples yielded zircon U-Pb ages of 10.2-5.8 Ma (
= 2), apatite (U-Th)/He (AHe) ages of 42.8-2.6 Ma ( = 7), and apatite fission-track (AFT) ages of 44.1-3.0 Ma ( = 9). Thermal history inversion modeling based on the AHe and AFT data suggested rapid cooling events confined within the study region at 
6-2 Ma. The Kanto Mountains may have undergone a domal uplift in association with their collision with the Tanzawa Block at 5 Ma. However, this uplift may have slowed down following the migration of the plate boundary and late Pliocene termination of the Tanzawa collision. The Minobu Mountains and possibly adjacent mountains may have been uplifted by the motional change of the Philippine Sea plate at 3 Ma. Therefore, the mountain formation in the South Fossa Magna zone was mainly controlled by collisions of the Tanzawa and Izu Blocks and motional change of the Philippine Sea plate. Earlier collisions of the Kushigatayama Block at 13 Ma and Misaka Block at 10 Ma appeared to have had little effect on mountain formation. Together with a 90 deg. clockwise rotation of the Kanto Mountains at 12-6 Ma, these observations suggest that horizontal deformation predominated during the earlier stage of arc-arc collision, and vertical movements due to buoyancy resulting from crustal shortening and thickening developed at a later stage.
Yamaguchi, Akiko; Nagata, Kojiro*; Tanaka, Kazuya; Kobayashi, Keita; Kobayashi, Toru; Shimojo, Kojiro; Tanida, Hajime; Sekiguchi, Tetsuhiro; Kaneta, Yui; Matsuda, Shohei; et al.
Hosha Kagaku, (45), p.28 - 30, 2022/03
no abstracts in English
Simonnet, M.; Kobayashi, Toru; Shimojo, Kojiro; Yokoyama, Keiichi; Yaita, Tsuyoshi
Inorganic Chemistry, 60(17), p.13409 - 13418, 2021/09
Times Cited Count：15 Percentile：87.32(Chemistry, Inorganic & Nuclear)Kobayashi, Yumi*; Sueoka, Shigeru; Fukuda, Shoma; Hasebe, Noriko*; Tamura, Akihiro*; Morishita, Tomoaki*; Tagami, Takahiro*
Fisshion, Torakku Nyusureta, (33), p.25 - 27, 2020/10
no abstracts in English
Ikeda, Shugo*; Kaneko, Koji; Tanaka, Yuki*; Kawasaki, Takuro; Hanashima, Takayasu*; Munakata, Koji*; Nakao, Akiko*; Kiyanagi, Ryoji; Ohara, Takashi; Mochizuki, Kensei*; et al.
Journal of the Physical Society of Japan, 89(1), p.014707_1 - 014707_7, 2020/01
Times Cited Count：1 Percentile：12.02(Physics, Multidisciplinary)Kobayashi, Yumi*; Sueoka, Shigeru; Fukuda, Shoma*; Hasebe, Noriko*; Tamura, Akihiro*; Morishita, Tomoaki*; Tagami, Takahiro*
Fisshion, Torakku Nyusureta, (32), p.8 - 11, 2019/12
no abstracts in English
Yoshigoe, Akitaka; Shiwaku, Hideaki; Kobayashi, Toru; Shimoyama, Iwao; Matsumura, Daiju; Tsuji, Takuya; Nishihata, Yasuo; Kogure, Toshihiro*; Okochi, Takuo*; Yasui, Akira*; et al.
Applied Physics Letters, 112(2), p.021603_1 - 021603_5, 2018/01
Times Cited Count：6 Percentile：34.59(Physics, Applied)A synchrotron radiation photoemission electron microscope (SR-PEEM) was applied to demonstrate pinpoint analysis of micrometer-sized weathered biotite clay particles with artificially adsorbed cesium (Cs) atoms. Despite the insulating properties of the clay, we observed the spatial distributions of constituent elements (Si, Al, Cs, Mg, Fe) without charging issues. We found that Cs atoms were likely to be adsorbed evenly over the entire particle. Spatially-resolved X-ray absorption spectra (XAS) of the Cs M
-edge region showed Cs to be present in a monocation state (Cs
). Further pinpoint XAS measurements were also performed at the Fe L
-edge to determine the chemical valence of the Fe atoms. Our results demonstrate the utility of SR-PEEM as a tool for spatially-resolved chemical analyses of various environmental substances, which is not limited by the poor conductivity of samples.
Sasaki, Takayuki*; Kokami, Takayuki*; Kobayashi, Taishi*; Kirishima, Akira*; Murakami, Hiroaki; Amano, Yuki; Mizuno, Takashi; Iwatsuki, Teruki; Sasamoto, Hiroshi; Miyakawa, Kazuya
Journal of Nuclear Science and Technology, 54(3), p.373 - 381, 2017/03
Trace amounts of natural thorium and uranium in deep groundwater were investigated at two underground research laboratories situated at Horonobe and Mizunami, Japan. The groundwater was sampled from underground boreholes, and the colloid contribution was checked by in situ two size-fractionated ultrafiltration systems. A decrease in the concentration after in situ filtration suggested the presence of natural colloids and suspended matter that were carriers of a portion of the elements. The result of the Th and U concentrations in groundwater after 10 kDa filtration was analyzed thermodynamically using existing hydrogeological and geochemical data such as the mineral components in the groundwater at a given pH, ionic strength, concentration of co-existing ions, redox potential, and solid phase assumed. A crystalline solid phase made the solubility very low compared with that of the amorphous phase, and the solubility agreed well with the concentrations measured.
Takahashi, Naoki; Yoshinaka, Kazuyuki; Harada, Akio; Yamanaka, Atsushi; Ueno, Takashi; Kurihara, Ryoichi; Suzuki, Soju; Takamatsu, Misao; Maeda, Shigetaka; Iseki, Atsushi; et al.
Nihon Genshiryoku Gakkai Homu Peji (Internet), 64 Pages, 2016/00
no abstracts in English
Mo/
Tc production by neutron activation methodIshida, Takuya; Shiina, Takayuki*; Ota, Akio*; Kimura, Akihiro; Nishikata, Kaori; Shibata, Akira; Tanase, Masakazu*; Kobayashi, Masaaki*; Sano, Tadafumi*; Fujihara, Yasuyuki*; et al.
JAEA-Technology 2015-030, 42 Pages, 2015/11
JAEA-Technology-2015-030.pdf:4.82MB
The research and development (R&D) on the production of Mo/Tc by neutron activation method ((n, ) method) using JMTR has been carried out in the Neutron Irradiation and Testing Reactor Center. The specific radioactivity of Mo by (n, ) method is extremely low compared with that by fission method ((n,f) method), and as a result, the radioactive concentration of the obtained Tc solution is also lowered. To solve the problem, we propose the solvent extraction with methyl ethyl ketone (MEK) for recovery of Tc from Mo produced by (n, ) method. We have developed the Mo/Tc separation/extraction/concentration devices and have carried out the performance tests for recovery of Tc from Mo produced by (n, ) method. In this paper, in order to establish an experimental system for Mo/Tc production, the R&D results of the system are summarized on the improvement of the devices for high-recovery rate of Tc, on the dissolution of the pellets, which is the high-density molybdenum trioxide (MoO
) pellets irradiated in Kyoto University Research Reactor (KUR), on the production of Tc, and on the inspection of the recovered Tc solutions.
Ando, Masanori; Hasebe, Shinichi; Kobayashi, Sumio; Kasahara, Naoto*; Toyoshi, Akira*; Omae, Takahiro*; Enuma, Yasuhiro*
Nuclear Engineering and Design, 275, p.408 - 421, 2014/08
Times Cited Count：4 Percentile：30.92(Nuclear Science & Technology)To clarify the failure mode of a semispherical tubesheet structure originally designed for SG in the JSFR, a cyclic thermal loading test was performed using a tubesheet model test structure. The tubesheet model made of Mod.9Cr-1Mo steel was subjected to 1,873 cycles of severe thermal transient loads using a large-scale sodium loop, in which sodium heated to 600
C and 250C was flowed repeatedly with periods for each transient of 2 and 1 h, respectively. After the test, the test model was inspected by PT. Then, observation using a SEM and hardness testing were performed. A thermal-hydraulic analysis was also performed to validate the measured temperature history during the thermal transient. Through these examinations and evaluation with thermal-hydraulic analysis, the manner of failure in the tubesheet under cyclic thermal loading is discussed.
Ando, Masanori; Hasebe, Shinichi; Kobayashi, Sumio; Kasahara, Naoto*; Toyoshi, Akira*; Omae, Takahiro*; Enuma, Yasuhiro*
Nuclear Engineering and Design, 275, p.422 - 432, 2014/08
Times Cited Count：12 Percentile：67.4(Nuclear Science & Technology)In this study, the strength of a tubesheet test model simulating a semispherical tubesheet structure subjected to cyclic thermal transients was evaluated using the finite element analysis (FEA). A test model made of Mod.9Cr-1Mo steel was subjected to 1,873 cycles of severe thermal transient loading using a large-scale sodium loop, in which elevated-temperature sodium at 600C and 250C was flowed repeatedly and kept at the final temperature for 2 and 1 h, respectively. Heat transfer analysis and stress analysis were performed using the sodium temperature data measured during the test. Then, the elastic and inelastic stress analysis results were used to investigate the failure mechanism by creep-fatigue damage and evaluate the failure strength. The evaluation based on the results of inelastic analysis estimated the number of cycles to failure within a factor of 3.
