Investigation on natural circulation for decay heat removal in reactor vessel of sodium-cooled fast reactor

Aizawa, Kosuke; Tsuji, Mitsuyo; Kobayashi, Jun; Kurihara, Akikazu; Miyake, Yasuhiro*; Nakane, Shigeru*; Ishida, Katsuji*

Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Sustainable Clean Energy for the Future (FR22) (Internet), 10 Pages, 2022/04

In sodium-cooled fast reactors (SFRs), optimizing the design and operate decay heat removal systems (DHRSs) is important for safety enhancement against severe accidents that could lead to core melting. The natural circulation phenomena in a reactor vessel during operating a DHRS were clarified by conducting water experiments using a 1:10 scale experimental facility (PHEASANT) simulating the reactor vessel of loop-type SFRs. In this study, we investigated the natural circulation phenomena under conditions of operating the dipped-type DHX and RVACS using the results of temperature and particle image velocimetry (PIV) measurements, respectively. Furthermore, the effects of temperature fluctuation on the PIV measurement were quantitatively evaluated.

Izu-Bonin arc collision and mountain formation of the South Fossa Magna region; New insight from low-temperature thermochronometry

Kobayashi, Yumi*; Sueoka, Shigeru; Fukuda, Shoma; Hasebe, Noriko*; Tamura, Akihiro*; Morishita, Tomoaki*; Tagami, Takahiro*

Fuisshon, Torakku Nyusureta, (33), p.25 - 27, 2020/10

no abstracts in English

Upgrade of the 3-MeV linac for testing of accelerator components at J-PARC

Kondo, Yasuhiro; Hirano, Koichiro; Ito, Takashi; Kikuzawa, Nobuhiro; Kitamura, Ryo; Morishita, Takatoshi; Oguri, Hidetomo; Okoshi, Kiyonori; Shinozaki, Shinichi; Shinto, Katsuhiro; et al.

Journal of Physics; Conference Series, 1350, p.012077_1 - 012077_7, 2019/12

https://doi.org/10.1088/1742-6596/1350/1/012077

We have upgraded a 3-MeV linac at J-PARC. The ion source is same as the J-PARC linac's, and the old 30-mA RFQ is replaced by a spare 50-mA RFQ, therefore, the beam energy is 3 MeV and the nominal beam current is 50 mA. The main purpose of this system is to test the spare RFQ, but also used for testing of various components required in order to keep the stable operation of the J-PARC accelerator. The accelerator has been already commissioned, and measurement programs have been started. In this paper, present status of this 3-MeV linac is presented.

Status of development on LaB filament arc-driven multi-cusp ion source for iBNCT

Shibata, Takanori*; Takagi, Akira*; Ikegami, Kiyoshi*; Sugimura, Takashi*; Nammo, Kesao*; Naito, Fujio*; Kobayashi, Hitoshi*; Kurihara, Toshikazu*; Honda, Yosuke*; Sato, Masaharu*; et al.

Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.385 - 387, 2018/10

Effect of magnetism on lattice dynamics in SrFeAs using high-resolution inelastic X-ray scattering

Murai, Naoki*; Fukuda, Tatsuo; Kobayashi, Tatsuya*; Nakajima, Masamichi*; Uchiyama, Hiroshi*; Ishikawa, Daisuke*; Tsutsui, Satoshi*; Nakamura, Hiroki; Machida, Masahiko; Miyasaka, Shigeki*; et al.

Physical Review B, 93(2), p.020301_1 - 020301_5, 2016/01

https://doi.org/10.1103/PhysRevB.93.020301

Design and manufacture of Joyo upper core structure for replacement

Ota, Katsu; Ushiki, Hiroshi*; Maeda, Shigetaka; Kawahara, Hirotaka; Takamatsu, Misao; Kobayashi, Tetsuhiko; Kikuchi, Yuki; Tobita, Shigeharu; Nagai, Akinori

JAEA-Technology 2015-026, 180 Pages, 2015/11

JAEA-Technology-2015-026.pdf:79.87MB

In the experimental fast reactor Joyo, it was confirmed that the top of the irradiation test sub-assembly of "MARICO-2" (material testing rig with temperature control) had bent onto the in-vessel storage rack as an obstacle and had damaged the upper core structure (UCS). The replacement of the UCS was conducted from May to December 2014. The design and manufacture of UCS was started from 2008, and the installation of UCS was completed successfully in November 21th 2014. The major results gained during the design and manufacture of UCS is as follows.

Numerical experiments on dispersion of radionuclides in the ocean released from the Fukushima Daiichi Nuclear Power Plant

Kawamura, Hideyuki; Kobayashi, Takuya; Furuno, Akiko; In, Teiji*; Ishikawa, Yoichi*; Nakayama, Tomoharu*; Shima, Shigeki*; Awaji, Toshiyuki*

Reports of Research Institute for Applied Mechanics, Kyushu University, (143), p.111 - 117, 2012/09

Because of the Fukushima Dai-ichi Nuclear Power Plant disaster, some radionuclides were released into the ocean from the Fukushima Dai-ichi Nuclear Power Plant. In response to this situation, numerical experiments were carried out at Japan Atomic Energy Agency using an oceanic dispersion model and an ocean general circulation model to estimate an effect of the radionuclides on marine environment. It was suggested that the radionuclides deposited from the atmosphere mainly in the middle of March after the disaster spread over a comparatively wide area of the Pacific Ocean east of Japan. On the other hand the radionuclides directly released into the ocean from the Fukushima Dai-ichi Nuclear Power Plant were carried along the coast and then spread along the Kuroshio extension.

Role of residual transition-metal atoms in oxygen reduction reaction in cobalt phthalocyanine-based carbon cathode catalysts for polymer electrolyte fuel cell

Kobayashi, Masaki*; Niwa, Hideharu*; Harada, Yoshihisa*; Horiba, Koji*; Oshima, Masaharu*; Ofuchi, Hironori*; Terakura, Kiyoyuki*; Ikeda, Takashi; Koshigoe, Yuka*; Ozaki, Junichi*; et al.

Journal of Power Sources, 196(20), p.8346 - 8351, 2011/10

https://doi.org/10.1016/j.jpowsour.2011.06.062

The electronic structure of Co atoms in CoPc-based carbon catalysts, which were prepared by pyrolyzing a mixture of CoPc and phenol resin polymer up to 1000C, has been investigated using XAFS analysis and HXPES. The Co K XAFS spectra show that most of the Co atoms are in the metallic state and small quantities of oxidized Co components are present in the samples even after acid washing to remove Co atoms. Based on the difference in probing depth between XAFS and HXPES, it was found that after acid washing, the surface region with the aggregated Co clusters is primarily composed of metallic Co. Since the electrochemical properties remain almost unchanged even after the acid washing process, the residual metallic and oxidized Co atoms themselves will hardly contribute to the ORR activity of the CoPc-based carbon cathode catalysts, implying that the active sites of the CoPc-based catalysts primarily consist of light elements such as C and N.

Conduction-band electronic states of YbInCu studied by photoemission and soft X-ray absorption spectroscopies

Utsumi, Yuki*; Sato, Hitoshi*; Kurihara, Hidenao*; Maso, Hiroyuki*; Hiraoka, Koichi*; Kojima, Kenichi*; Tobimatsu, Komei*; Okochi, Takuo*; Fujimori, Shinichi; Takeda, Yukiharu; et al.

Physical Review B, 84(11), p.115143_1 - 115143_7, 2011/09

https://doi.org/10.1103/PhysRevB.84.115143

We have studied conduction-band (CB) electronic states of a typical valence-transition compound YbInCu by means of temperature-dependent hard X-ray photoemission spectroscopy (HX-PES), soft X-ray absorption spectroscopy (XAS), and soft X-ray photoemission spectroscopy (SX-PES) of the valence band. We have described the valence transition in YbInCu in terms of the charge transfer from the CB to Yb 4 states.

Simulation of the spalling phenomena at the sp Pillar Stability Experiment by the coupled T-H-M analysis using the damage model

Chijimatsu, Masakazu*; Koyama, Tomofumi*; Kobayashi, Akira*; Shimizu, Hiroyuki*; Nakama, Shigeo

Proceedings of 4th International Conference on Coupled T-H-M-C Processes in Geosystems: Fundamentals, Modeling, Experiments and Applications (GeoProc 2011) (CD-ROM), 13 Pages, 2011/07

The experiment was performed at the sp Hard Rock Laboratory facility owned by the Swedish Nuclear Fuel and Waste Management Co. For the experiment an oval shape tunnel was excavated in which two large holes, 1.75 m and depth 6.5 m, were excavated. The holes were placed so that a 1 m wide vertical pillar was created between them. The pillar volume was then heated to increase the tangential stress so that yielding could propagate along the borehole wall. Analysis of the coupled thermal, hydraulic and mechanical processes is carried out with the computer code named THAMES. In order to evaluate the spalling phenomena, the damage model was included in the computer code. In the damage mechanics, the change in mechanical behavior due to the growth of damage (cracks) in material is considered. The parameters of this damage model were determined by the unconfined compression test. When the parameters determined by laboratory test were used, the damage did not occur. This is because the parameters were determined from the experiment of the rock core, and it is thought that the parameter of actual bedrock is inferior to that of the rock core. Therefore, the calibration of the damage parameters was performed. When the calibrated parameters were used, simulation results agree qualitatively well with the experimental results. During the simulation of excavation, generating of damage is seen to similar to the observation by the in-situ experiment. Furthermore, temperature change during heating after the excavation of borehole also shows the good agreement between the measured and simulated results. Therefore, it can be said that the spalling phenomenon is expressible even by the application with the continuum model by the use of the suitable parameters.