Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Motoshima, Takayuki*; Matsui, Hiroya; Kawakubo, Masahiro*; Kobayashi, Masato*; Ichimura, Tetsuhiro*; Sugita, Yutaka
Nihon Genshiryoku Gakkai-Shi ATOMO
, 64(3), p.163 - 167, 2022/03
no abstracts in English
Sasaki, Takayuki*; Kokami, Takayuki*; Kobayashi, Taishi*; Kirishima, Akira*; Murakami, Hiroaki; Amano, Yuki; Mizuno, Takashi; Iwatsuki, Teruki; Sasamoto, Hiroshi; Miyakawa, Kazuya
Journal of Nuclear Science and Technology, 54(3), p.373 - 381, 2017/03
Trace amounts of natural thorium and uranium in deep groundwater were investigated at two underground research laboratories situated at Horonobe and Mizunami, Japan. The groundwater was sampled from underground boreholes, and the colloid contribution was checked by in situ two size-fractionated ultrafiltration systems. A decrease in the concentration after in situ filtration suggested the presence of natural colloids and suspended matter that were carriers of a portion of the elements. The result of the Th and U concentrations in groundwater after 10 kDa filtration was analyzed thermodynamically using existing hydrogeological and geochemical data such as the mineral components in the groundwater at a given pH, ionic strength, concentration of co-existing ions, redox potential, and solid phase assumed. A crystalline solid phase made the solubility very low compared with that of the amorphous phase, and the solubility agreed well with the concentrations measured.
Saigusa, Mikio*; Oyama, Gaku*; Matsubara, Fumiaki*; Takii, Keita*; Sai, Takuma*; Kobayashi, Takayuki; Moriyama, Shinichi
Fusion Engineering and Design, 96-97, p.577 - 582, 2015/10
Times Cited Count：6 Percentile：45.92(Nuclear Science & Technology)A wideband polarizer has been developed for an ECCD system in JT-60SA. The groove depth of the mirrors installed in miter bends were optimized for two frequencies (110 GHz and 138 GHz) by numerical simulations. All surfaces of Poincare spheres were covered at both of the frequencies in low power test. The thermal stress of polarizer were estimated by the numerical simulations. The twister polarizer has been tested up to 0.24 MW during 3 s at 110 GHz.
Kobayashi, Takayuki; Sawahata, Masayuki; Terakado, Masayuki; Hiranai, Shinichi; Ikeda, Ryosuke; Oda, Yasuhisa; Wada, Kenji; Hinata, Jun; Yokokura, Kenji; Hoshino, Katsumichi; et al.
Proceedings of 40th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2015) (USB Flash Drive), 3 Pages, 2015/08
A gyrotron for electron cyclotron heating and current drive (ECH/CD) has been developed for JT-60SA (Super-Advanced). In high-power, long-pulse operations, oscillations of 1 MW/100 s have been demonstrated at both 110 GHz and 138 GHz, for the first time. These results fully satisfied the requirements for JT-60SA. Moreover, it was experimentally shown that the higher power operation at each frequency is expected to be acceptable for this gyrotron from the viewpoint of heat load at the cavity resonator, collector, and stray radiation absorbers. An oscillation at 82 GHz, which is an additional frequency, has been demonstrated up to 2 s at the output power of 0.4 MW, so far. High power experiments toward higher power of 1.5 MW (110/138 GHz) and 1 MW (82 GHz) are ongoing.
Kobayashi, Takayuki; Moriyama, Shinichi; Yokokura, Kenji; Sawahata, Masayuki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Hoshino, Katsumichi; et al.
Nuclear Fusion, 55(6), p.063008_1 - 063008_8, 2015/06
Times Cited Count：25 Percentile：77.57(Physics, Fluids & Plasmas)A gyrotron enabling high-power, long-pulse oscillations at both 110 GHz and 138 GHz has been developed for electron cyclotron heating (ECH) and current drive (CD) in JT-60SA. Oscillations of 1 MW for 100 s have been demonstrated at both frequencies, for the first time as a gyrotron operating at two frequencies. The optimization of the anode voltage, or the electron pitch factor, using a triode gun was a key to obtain high power and high efficiency at two frequencies. It was also confirmed that the internal losses in the gyrotron were sufficiently low for expected long pulse operation at the higher power level of 
1.5 MW. Another important result is that an oscillation at 82 GHz, which enables to use fundamental harmonic waves in JT-60SA while the other two frequencies are used as second harmonics waves, was demonstrated up to 0.4 MW for 2 s. These results of the gyrotron development significantly contribute to enhancing operation regime of the ECH/CD system in JT-60SA.
Kobayashi, Takayuki; Moriyama, Shinichi; Isayama, Akihiko; Sawahata, Masayuki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Yokokura, Kenji; et al.
EPJ Web of Conferences, 87, p.04008_1 - 04008_5, 2015/03
Times Cited Count：5 Percentile：83.62(Physics, Fluids & Plasmas)A dual-frequency gyrotron, which can generate 110 GHz and 138 GHz waves independently, is being developed in JAEA to enable electron cyclotron heating (ECH) and current drive (ECCD) in a wider range of plasma discharge conditions of JT-60SA. Operation for the gyrotron conditioning and parameter optimization toward 1 MW for 100 s, which is the target output power and pulse length for JT-60SA, is in progress without problems. Oscillations of 1 MW for 10 s and 0.51 MW for 198 s were obtained, so far, at both frequencies. In addition, an oscillation (0.3 MW for 20 ms) at 82 GHz was demonstrated as an additional frequency of the dual-frequency gyrotron which shows a possibility of the use of fundamental harmonic wave in JT-60SA.
Ives, L.*; Mizuhara, M.*; Kobayashi, Takayuki; Moriyama, Shinichi; Collins, G.*; Borchard, P.*; Neilson, J.*
IEEE Transactions on Electron Devices, 61(6), p.1800 - 1805, 2014/06
Times Cited Count：7 Percentile：39.51(Engineering, Electrical & Electronic)The development is complete on a load to dissipate 2-MW continuous wave of RF power at frequencies above 100 GHz and transmitted in the HE11 waveguide. A rotating launcher distributes the RF power inside the load and prevents excessive localized heating from constructive interference. The load design also minimizes reflected power. Two loads are currently in operation in Japan Atomic Energy Agency, and the performance results are presented. A new version is in development for the ITER facility in France.
Yokokura, Kenji; Moriyama, Shinichi; Kobayashi, Takayuki; Hiranai, Shinichi; Sawahata, Masayuki; Terakado, Masayuki; Hinata, Jun; Wada, Kenji; Sato, Yoshikatsu; Hoshino, Katsumichi; et al.
JAEA-Technology 2014-002, 64 Pages, 2014/03
JAEA-Technology-2014-002.pdf:6.83MB
A new instrument has been developed to measure spatial distribution of power density and total power of the millimeter wave, by measuring temperature rise of dielectric material inserted in the waveguide. For a measurement, a dielectric disk with thermally insulated support is inserted into the few millimeters gap in the waveguide. The disk is heated by the millimeter wave pulse for 0.10.2 s, and immediately after the pulse, it is pulled up and its temperature distribution is measured by an infrared camera to estimate the spatial power density distribution of the millimeter wave. In the other hand, total transmission power is estimated by the disk temperature reached equilibrium. In the measurement test, deformation of the power density distribution was successfully detected when the mirror angle was intentionally changed in the matching optics unit (MOU) at the waveguide input from the gyrotron. The test result shows that the instrument is effective for both adjustment of MOU without opening the vacuum boundary and to detect any abnormal transmission during operation of the ECH system. The test also shows high reliability of the instrument which stands with 1 MW high power transmission without any arcing or pressure rise in vacuum region. The instrument will be contributed to keep good condition of high power long pulse ECH system by detecting abnormal transmission in the waveguide in operation without open vacuum boundary.
Moriyama, Shinichi; Kobayashi, Takayuki; Isayama, Akihiko; Hoshino, Katsumichi; Suzuki, Sadaaki; Hiranai, Shinichi; Yokokura, Kenji; Sawahata, Masayuki; Terakado, Masayuki; Hinata, Jun; et al.
Fusion Engineering and Design, 88(6-8), p.935 - 939, 2013/10
Times Cited Count：4 Percentile：32.48(Nuclear Science & Technology)An antenna having a first mirror driven in the linear motion (LM) and a fixed second mirror was proposed for electron cyclotron range of frequency (ECRF) heating and current drive system, to minimize the risk of cooling-water-leakage. Basic mechanical feasibilities of the bellows covering the movable structures of the antenna were previously investigated using a mock-up. This time, a support structure of the shaft has been designed using a metallic sliding bearing with solid lubricant. The sliding bearing can support combination of linear and rotational motions while a ball bearing supports either linear or rotational motion. We have newly installed the sliding bearing into the mock-up. A vacuum pumping test has been carried out paying attention to the influence of the solid lubricant by mass analysis. To design the LM antenna for JT-60SA in detail, heating and current drive characteristics for typical experimental scenarios of JT-60SA has been investigated by calculation.
Yoshida, Maiko; Ide, Shunsuke; Takenaga, Hidenobu; Honda, Mitsuru; Urano, Hajime; Kobayashi, Takayuki; Nakata, Motoki; Miyato, Naoaki; Kamada, Yutaka
Nuclear Fusion, 53(8), p.083022_1 - 083022_10, 2013/07
Times Cited Count：7 Percentile：30.26(Physics, Fluids & Plasmas)Time and special responses of electron channels and ion channels with central electron cyclotron heating (ECH) have been investigated in JT-60U positive shear H-mode and internal transport barrier (ITB) plasmas. The ion temperature reduces with ECH after the increase in the electron temperature where an increase in the ion heat transport with ECH accompanies an increase in the electron thermal transport. The core electron density decreases with ECH when the density profile is peaked before ECH injection. The counter intrinsic rotation with ECH is identified using H-mode plasmas with small torque input (BAL-NBI). The counter intrinsic rotation is generated after the increase in the electron temperature and correlates with the change in the electron temperature with ECH around the EC deposition. Time scale of the change in the toroidal rotation velocity is about 90-200 ms around the ECH deposition and the time scale is longer compared to those in 
and 
.
Kobayashi, Takayuki; Isayama, Akihiko; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Yokokura, Kenji; et al.
Fusion Science and Technology, 63(1T), p.160 - 163, 2013/05
Times Cited Count：7 Percentile：49.28(Nuclear Science & Technology)A dual frequency electron cyclotron range of frequency system has been developed for JT-60SA, by which a second frequency (135 140 GHz) is generated in addition to the first frequency of 110 GHz. A development of a dual frequency gyrotron is a key to realize the dual frequency system. The second frequency was chosen to be 138 GHz from the above frequency range from the viewpoint of gyrotron design. In order to realize high-power (
1 MW) and long-pulse operation for both frequencies, we designed main components of the gyrotron (the diamond window, cavity resonator and quasi-optical mode converter). We found the optimum parameter set from the parameters of these components, which has discrete characteristics. It was confirmed that the output power higher than 1 MW is obtained for both frequencies as a result of numerical design. Based on the above design, a dual frequency gyrotron was newly fabricated. In the conditioning operation, an output power was obtained as we expected.
Kobayashi, Takayuki; Isayama, Akihiko; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Yokokura, Kenji; et al.
Proceedings of 37th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2012) (USB Flash Drive), 2 Pages, 2012/09
A new dual frequency (110 GHz and 138 GHz) gyrotron development began for JT-60SA. An output power and efficiency higher than 1 MW and 30% with a peak heat load lower than 1.4 kW/cm
were obtained for both frequencies in calculation. High mode conversion efficiencies of the quasioptical mode converter (96.8% for 110 GHz and 98.3% for 138 GHz), which is higher than the previously developed 110 GHz long pulse gyrotron (96.5%), was obtained. The new gyrotron was fabricated and conditioning operation has been started from the middle of June 2012. The gyrotron output power of approximately 200 kW was obtained, so far, as we expected in the design of the gyrotron at low beam current of 10 A and low beam voltage of 75 kV.
Isayama, Akihiko; Kobayashi, Takayuki; Yokokura, Kenji; Shimono, Mitsugu; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Hinata, Jun; et al.
Plasma and Fusion Research (Internet), 7(Sp.1), p.2405029_1 - 2405029_5, 2012/05
no abstracts in English
Kobayashi, Takayuki; Isayama, Akihiko; Hasegawa, Koichi; Suzuki, Sadaaki; Hiranai, Shinichi; Sato, Fumiaki; Wada, Kenji; Yokokura, Kenji; Shimono, Mitsugu; Sawahata, Masayuki; et al.
Fusion Engineering and Design, 86(6-8), p.763 - 767, 2011/10
Times Cited Count：6 Percentile：44.28(Nuclear Science & Technology)Progress of antenna development of the Electron Cyclotron Range of Frequency system for JT-60 SA is presented. Capability of pulse length of 100 s, which requires active cooling for mirrors, and flexibility of beam injection angles in both poloidal and toroidal directions are required for the antenna with high reliability. Mechanical and structural design works of the launcher (antenna and its support with steering structure) based on a linear motion antenna concept are in progress. The key component is a long-stroke bellows which enables to alter poloidal injection angle and a bellows which enables to alter toroidal injection angle. Using a newly fabricated mock-up of the steering structure, it was confirmed that the antenna was mechanically realized for poloidal and toroidal injection angle ranges of -10 to +45
and -15 to +15, respectively. Those angles are consistent with angles required in JT-60SA. The results of thermal and structural analyses are also presented.
Kobayashi, Takayuki; Isayama, Akihiko; Yokokura, Kenji; Shimono, Mitsugu; Hasegawa, Koichi; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Sato, Fumiaki; et al.
Nuclear Fusion, 51(10), p.103037_1 - 103037_10, 2011/10
Times Cited Count：19 Percentile：62.41(Physics, Fluids & Plasmas)A new gyrotron operation technique to increase oscillation efficiency was developed on the JT 60 ECRF system. The electron pitch factor was optimized by controlling anode voltage within 0.1 s after the start of the operation. By applying this technique, the gyrotron output power of 1.5 MW for 4 s was recorded, for the first time. The reduced collector heat load at 1.5 MW operations was reduced by 20% and it will be acceptable for longer pulse operation. A new gyrotron with an improved mode converter was developed in order to demonstrate reduction of the stray radiation which had limited the pulse length. The stray radiation was reduced to 1/3 of that of the original gyrotron. A conditioning operation of the improved gyrotron is proceeding up to 31 s at 1 MW. These progresses significantly contribute to enhancing the high power and long pulse capability of the ECRF system toward JT 60SA.
Kobayashi, Takayuki; Moriyama, Shinichi; Isayama, Akihiko; Hoshino, Katsumichi; Sakamoto, Keishi; Takahashi, Koji; Kajiwara, Ken; Oda, Yasuhisa; Kasugai, Atsushi
Denki Gakkai Kenkyukai Shiryo, Genshiryoku Kenkyukai (NE-11-6), p.11 - 15, 2011/09
The developments of radio frequency systems for plasma heating and current drive have been continued for magnetically-confined fusion devices, such as JT-60SA, ITER. The specifications of the systems are shown. Recent progress in the electron cyclotron range of frequency system developments, especially for the JT-60SA, is summarized.
Sato, Shoichi*; Ichimura, Makoto*; Yamaguchi, Yusuke*; Katano, Makoto*; Imai, Yasutaka*; Murakami, Tatsuya*; Miyake, Yuichiro*; Yokoyama, Takuro*; Moriyama, Shinichi; Kobayashi, Takayuki; et al.
Plasma and Fusion Research (Internet), 5, p.S2067_1 - S2067_4, 2010/12
Ion cyclotron emissions (ICEs) due to deuterium-deuterium fusion-product (FP) ions on JT-60U are studied. ICE due to H-ions is identified from the difference of the toroidal wave number of 2nd ICE(D). The parameter dependence for the appearance of ICE(H) is investigated from the experimental conditions and also is studied by using "Escape Particle Orbit analysis Code (EPOC)".
Hiranai, Shinichi; Suzuki, Sadaaki; Sato, Fumiaki; Kobayashi, Takayuki; Hasegawa, Koichi; Yokokura, Kenji; Moriyama, Shinichi
JAEA-Technology 2010-031, 24 Pages, 2010/09
JAEA-Technology-2010-031.pdf:1.71MB
The JT-60U electron cyclotron heating (ECH) system injects a millimeter wave at 110 GHz into the JT-60U plasma, and heats the plasma or drives a current locally to enhance the confinement performance of the JT-60U plasma. The ECH system of high power gyrotrons, transmission lines and antenna that launch millimeter wave beams toward the plasma. On the long pulse injection, one of the most important purposes is to prevent arcing in the transmission lines and to transmit millimeter wave beams efficiently. This report describes the problems occurred in a long pulse injection test (0.5 MW, 30 s), e.g., increase in released gas, temperature rise of the transmission line and an arcing at the vacuum window during the conditioning process. It also describes measures for the problems, e.g., improvements in vacuum pumping system, cooling system, and arc detector and introduction of the new dummy road system.
Kobayashi, Takayuki; Isayama, Akihiko; Fasel, D.*; Yokokura, Kenji; Shimono, Mitsugu; Hasegawa, Koichi; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; et al.
Journal of Plasma and Fusion Research SERIES, Vol.9, p.363 - 368, 2010/08
Improvements are required for expanding the pulse length of the JT-60 ECRF system (5s) for JT-60SA (100s). Newly developed power supplies will be fabricated and installed by EU. The conditioning operation of an improved gyrotron equipping a newly designed mode convertor has been started. The mode convertor will reduce heat flux on the internal components and therefore expected to enable long pulse operation at 1 MW. Pre-programmed and/or feedback control of the heater current and anode voltage, which was successfully demonstrated in JT-60U, will be key techniques because the beam current decreases during a shot. The evacuated transmission lines have a capability of 1 MW per line. Since maintenance of the components in the vacuum vessel is difficult, a linear motion antenna concept was proposed to reduce risks of water leakage and fault of the driving mechanism in the vacuum vessel. The detailed design and the low power test of a mock-up antenna have been started.
Kojima, Atsushi; Kobayashi, Takayuki; Tobari, Hiroyuki
Purazuma, Kaku Yugo Gakkai-Shi, 86(5), P. 297, 2010/05
The 13th Young Scientist Workshop was held at Naka Fusion Institute and organized by Division of Advanced Plasma Research and Tokamak System Technology. 52 young scientists participated in the workshop, and 6 overview talks and 23 oral talks were given about plasma heating and control techniques. Because the participants had both of oral and poster presentations, the participants understood the study of each other and the discussion lasted during the workshop. On the last day of the workshop, the participants visited the ITER gyrotrons, ITER remote handling and the control room of JT-60.
