Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sato, Yuji; Miyamoto, Yuta; Awatani, Yuto; Yamamoto, Kosuke; Hatakeyama, Takumi
JAEA-Review 2023-002, 59 Pages, 2023/08
JAEA-Review-2023-002.pdf:8.75MB
"Fugen Decommissioning Engineering Center", in planning and carrying out our decommissioning technical development, organizes "Technical special committee on Fugen decommissioning" which consists of the members well-informed, aiming to make good use of Fugen as a place for technological development which is opened domestic and international, as the central place in research and development base of Fukui prefecture, and to utilize the outcome in our decommissioning to the technical development effectively. This report consists of presentation paper are "Achievements and Considerations for Sampling and Analysis of Reactor Core Components", "Treatment of liquid scintillator waste liquid" and "Results and issues of rationalization of decontamination related to the clearance and considerations related to surface contamination monitoring" which is presented in the 39th Technical Special Committee on Fugen Decommissioning.
Dairaku, Masayuki; Watanabe, Kazuhiro; Tobari, Hiroyuki; Kashiwagi, Mieko; Inoue, Takashi; Sakamoto, Keishi; Hanada, Masaya; Akino, Noboru; Ikeda, Yoshitaka; Yamamoto, Takumi*
JAEA-Technology 2008-091, 23 Pages, 2009/03
JAEA-Technology-2008-091.pdf:5.82MB
A plasma generator whose inner dimensions are 25 cm in width, 59 cm in length, and 31 cm in depth for a high power and long pulse ion source in neutral beam injector has been designed and fabricated. The plasma generator has a beam extraction area of 12 cm in width and 46 cm in length. A target of the output beam using the plasma generator is to produce deuterium positive ion beams up to 120 keV, 65 A for longer than 200 s pulses. Arrangement of the permanent magnets and filaments has been designed by using an electron trajectory simulation code to produce uniform and high density plasma with high proton yield. Cooling channels have been also designed to operate the long pulse plasma generation with a 100 kW arc discharge power.
Matsukawa, Makoto; Kikuchi, Mitsuru; Fujii, Tsuneyuki; Fujita, Takaaki; Hayashi, Takao; Higashijima, Satoru; Hosogane, Nobuyuki; Ikeda, Yoshitaka; Ide, Shunsuke; Ishida, Shinichi; et al.
Fusion Engineering and Design, 83(7-9), p.795 - 803, 2008/12
Times Cited Count：17 Percentile：72.86(Nuclear Science & Technology)no abstracts in English
Bae, Y. S.*; Na, Y. S.*; Oh, Y. K.*; Kwon, M.*; Bak, J. S.*; Lee, G. S.*; Jeong, J. H.*; Park, S. I.*; Cho, M. H.*; Namkung, W.*; et al.
Fusion Science and Technology, 52(2), p.321 - 333, 2007/08
Times Cited Count：23 Percentile：81.77(Nuclear Science & Technology)An 84-GHz, 500-kW gyrotron system have been installed at KSTAR, and the initial test of the gyrotron has been carried out with 20 
sec-pulse and an output RF power of 500 kW. The launcher system having with a highly flexible steering mirror was fabricated and would inject 500-kW rf power into the KSTAR plasma. KSTAR will employ 170-GHz EC current drive (CD) in ITER-relevant experiments such as the suppression of the neoclassical tearing modes and the creation of an electron internal transport barrier. A JAEA 170-GHz, 1-MW gyrotron on loan in accordance with a Korea-Japan fusion collaboration agreement, and it will be used for the 170-GHz, 1-MW ECCD system in 2010. This paper describes the current status of the installation and initial conditioning tests of the 84-GHz gyrotron system as well as the development plan of the 170-GHz ECH and CD system. Also, this paper discusses the CD efficiency and the steering range of the second-harmonic X-mode injection.
Ninomiya, Hiromasa; Akiba, Masato; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hayashi, Nobuhiko; Hosogane, Nobuyuki; Ikeda, Yoshitaka; Inoue, Nobuyuki; et al.
Journal of the Korean Physical Society, 49, p.S428 - S432, 2006/12
To contribute DEMO and ITER, the design to modify the present JT-60U into superconducting coil machine, named National Centralized Tokamak (NCT), is being progressed under nationwide collaborations in Japan. Mission, design and strategy of this NCT program is summarized.
Ikeda, Yoshitaka; Umeda, Naotaka; Akino, Noboru; Ebisawa, Noboru; Grisham, L. R.*; Hanada, Masaya; Honda, Atsushi; Inoue, Takashi; Kawai, Mikito; Kazawa, Minoru; et al.
Nuclear Fusion, 46(6), p.S211 - S219, 2006/06
Times Cited Count：59 Percentile：87.2(Physics, Fluids & Plasmas)Recently, the extension of the pulse duration up to 30 sec has been intended to study quasi-steady state plasma on JT-60U N-NBI system. The most serious issue is to reduce the heat load on the grids for long pulse operation. Two modifications have been proposed to reduce the heat load. One is to suppress the beam spread which may be caused by beamlet-beamlet interaction in the multi-aperture grid due to the space charge force. Thin plates were attached on the extraction grid to modify the local electric field. The plate thickness was optimized to steer the beamlet deflection. The other is to reduce the stripping loss, where the electron of the negative ion beam is stripped and accelerated in the ion source and then collides with the grids. The ion source was modified to reduce the pressure in the accelerator column to suppress the beam-ion stripping loss. Up to now, long pulse injection of 17 sec for 1.6 MW and 25 sec for 
1 MW has been obtained by one ion source with these modifications.
Hoshino, Katsumichi; Yamamoto, Takumi; Tamai, Hiroshi; Oasa, Kazumi; Kawashima, Hisato; Miura, Yukitoshi; Ogawa, Toshihide; Shoji, Teruaki*; Shibata, Takatoshi; Kikuchi, Kazuo; et al.
Fusion Science and Technology, 49(2), p.139 - 167, 2006/02
Times Cited Count：2 Percentile：17.18(Nuclear Science & Technology)The main results obtained by the various heating and current drive systems, external coil system and divertor bias system are reviewed from the viewpoint of the advanced active control of the tokamak plasma. Also, the features of each system are described. The contribution of the JFT-2M in these areas are summarized.
Umeda, Naotaka; Yamamoto, Takumi; Hanada, Masaya; Grisham, L. R.*; Kawai, Mikito; Oga, Tokumichi; Akino, Noboru; Inoue, Takashi; Kazawa, Minoru; Kikuchi, Katsumi*; et al.
Fusion Engineering and Design, 74(1-4), p.385 - 390, 2005/11
Times Cited Count：9 Percentile：53.19(Nuclear Science & Technology)In negative ion based neutral beam injector (N-NBI) for JT-60U, some modifications for extent pulse duration from 10 second, which is design value, to 30 second was conducted. Main limit to prevent pulse extension was heat loads onto grounded grid in an ion source and onto beam limiter placed at 22 m from the ion source. To reduce these heat loads, beam extraction area was optimized and the limiter was changed to one which had about twice thermal capacity. As a result of these modifications, the temperature rise of the water which was cooling grounded grid could be suppressed under 40 degree, which can operate in steady state condition. The temperature rise of the limiter could be restricted to 60%. Untill now the beam pulse extended to 17 second of 1.6MW power at 366keV energy, and injection of 30 seconds will be achieved in next experiment.
discharges and real-time control of current profile in JT-60USuzuki, Takahiro; Isayama, Akihiko; Sakamoto, Yoshiteru; Ide, Shunsuke; Fujita, Takaaki; Takenaga, Hidenobu; Luce, T. C.*; Wade, M. R.*; Oikawa, Toshihiro; Naito, Osamu; et al.
Proceedings of 20th IAEA Fusion Energy Conference (FEC 2004) (CD-ROM), 8 Pages, 2004/11
no abstracts in English
Tamai, Hiroshi; Matsukawa, Makoto; Kurita, Genichi; Hayashi, Nobuhiko; Urata, Kazuhiro*; Miura, Yushi; Kizu, Kaname; Tsuchiya, Katsuhiko; Morioka, Atsuhiko; Kudo, Yusuke; et al.
Plasma Science and Technology, 6(1), p.2141 - 2150, 2004/02
Times Cited Count：2 Percentile：6.49(Physics, Fluids & Plasmas)The dominant issue for the the modification program of JT-60 (JT-60SC) is to demonstrate the steady state reactor relevant plasma operation. Physics design on plasma parameters, operation scenarios, and the plasma control method are investigated for the achievement of high-
. Engineering design and the R&D on the superconducting magnet coils, radiation shield, and vacuum vessel are performed. Recent progress in such physics and technology developments is presented.
Yamamoto, Takumi; Oga, Tokumichi; Kawai, Mikito; Akino, Noboru; Kazawa, Minoru; Umeda, Naotaka
Heisei-16-Nen Denki Gakkai Zenkoku Taikai Koen Rombunshu, 219 Pages, 2004/00
In JAERI, 10 MW and 500 keV negative-ion based neutral beam injection (N-NBI) system for JT-60U was constructed in 1996, in order to study a plasma heating and current drive in high-density plasma by high-energy beam injection. Thereafter, improvement of beam performance has been carried out while N-NBI system was available for experiments on JT-60U. The maximum beam energy of 418 keV and the maximum injection power of 6.2 MW have been achieved with a hydrogen beam, so far. In addition, 10 seconds of injection pulse duration, which is the designed value, was attained at the injection power of 2.6MW. Further improvement is required for the performance to reach to the final targets. It was made it clear that the performance was limited by the withstanding voltage of acceleration and heat load on acceleration grids in the ion source.
Inoue, Takashi; Hanada, Masaya; Iga, Takashi*; Imai, Tsuyoshi; Kashiwagi, Mieko; Kawai, Mikito; Morishita, Takatoshi; Taniguchi, Masaki; Umeda, Naotaka; Watanabe, Kazuhiro; et al.
Fusion Engineering and Design, 66-68, p.597 - 602, 2003/09
Times Cited Count：21 Percentile：78.49(Nuclear Science & Technology)The neutral beam (NB) injection has been one of the most promising methods for plasma heating and current drive in tokamak fusion devices. JAERI has developed high energy electrostatic accelerators for the NB systems in JT-60U and ITER. Recent progress on this R&D are as follows: 1) In the JT-60U NB system, some of the beams has been deflected due to distorted electric field in the accelerator, resulting in an excess heat load on the NB port. By correcting the electric field, a continuous injection of H
beam was succeeded for 10 s with the NB power of 2.6 MW at 355 keV. 2) To increase the beam energy, a metal structure called stress ring was designed. The ring reduces electric field concentration at the triple junction point (interface between metal and dielectric insulator inside vacuum). Initial test of the accelerators with the stress rings has shown higher voltage hold off performance in both accelerators for JT-60U and ITER R&D than that without rings.
Yamamoto, Takumi; JT-60 Team
Fusion Engineering and Design, 66-68, p.39 - 48, 2003/09
Times Cited Count：3 Percentile：25.79(Nuclear Science & Technology)Development of technology on facilities for JT-60U and resultant progress of the plasma performance are reported. The main objectives of JT-60U are to demonstrate integrated high plasma performance that contributes to establishment of the physical and technological bases of ITER and a steady state tokamak fusion reactor. Recently, performance exploration in advanced tokamak regimes has been conducted intensively, by using 500 keV negative-ion based neutral beam injection (N-NBI) and 110GHz electron cyclotron (EC) systems for plasma heating and current drive, and a repetitive centrifugal pellet injector for efficient core particle fueling.
Kawai, Mikito; Akino, Noboru; Ebisawa, Noboru; Grisham, L. R.*; Hanada, Masaya; Honda, Atsushi; Inoue, Takashi; Kazawa, Minoru; Kikuchi, Katsumi*; Kuriyama, Masaaki; et al.
Fusion Science and Technology, 44(2), p.508 - 512, 2003/09
Times Cited Count：5 Percentile：36.81(Nuclear Science & Technology)The negative ion source for negative ion based neutral beam injector(N-NBI) of JT-60U aims at generating a negative ion beam with 500 keV and 22A for 10s. The N-NBI system was completed in 1996, followed by starting the efforts to increase beam power and energy. (1)Spatial non-uniformity of the source plasma causes position-dependent divergence of a beamlet due to mis-matching of local beam perveance. A part of the divergent energetic beams is intercepted by the grids and resultantly produce the excessive heat load of the grids and/or induce the high voltage breakdown. So several techniques to take measures against and to correct the non-uniformity in these sources were implemented. (2)Correction of beamlet deflection by adjusting the electric field at the extraction grids. It improved the beam divergence and then decreased an excessive heat load of a beam limiter by more than 50 %. As a result, the maximum injection power 6.2MW and beam pulse duration 10 seconds were obtaind.
Kaneko, Osamu*; Yamamoto, Takumi; Akiba, Masato; Hanada, Masaya; Ikeda, Katsunori*; Inoue, Takashi; Nagaoka, Kenichi*; Oka, Yoshihide*; Osakabe, Masaki*; Takeiri, Yasuhiko*; et al.
Fusion Science and Technology, 44(2), p.503 - 507, 2003/09
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)High energy negative-ion-based neutral beam injection (N-NBI) is expected as an efficient and reliable tool of heating and current driving for reactor plasmas such as ITER. A world wide activity on developing technology of negative ion production and beam formation started in 1980's and the great progress has been achieved up to now. In particular, Japan has two large projects that planned adopting N-NBI for real plasma experiments; the JT-60U tokamak and the LHD heliotron, which further motivated the R&D activity. These R&D programs were carried out at JAERI and NIFS separately in Japan, and both were successfully done. The first beam injection experiment was made on the JT-60U in 1996, followed by the LHD in 1998. They were the first experiments on heating plasma by high energy beam in tokamaks and in stellerators, and the obtained results were very promising.
Umeda, Naotaka; Grisham, L. R.*; Yamamoto, Takumi; Kuriyama, Masaaki; Kawai, Mikito; Oga, Tokumichi; Mogaki, Kazuhiko; Akino, Noboru; Yamazaki, Haruyuki*; Usui, Katsutomi; et al.
Nuclear Fusion, 43(7), p.522 - 526, 2003/07
Times Cited Count：39 Percentile：74.23(Physics, Fluids & Plasmas)The Negative-ion based Neutral Beam Injection System (N-NBI) for JT-60U has been operating for plasma heating and non-inductive current drive since 1996. The target is inject of neutral beam into plasma with beam energy 500 keV, injection power 10 MW, for 10 seconds. Until now pulse duration time was restricted up to 5.3 seconds because of larger heat load of port limiter. Recently from the measurement of beam profile at 3.5m downstream from the ion source, it was found that the outermost beamlets in each segment were deflected outward. It was caused by non-uniform electric field by grooves. By improving this, outermost beamlet deflection angle was decreased from 14 mrad to 4 mrad. In this result, 10 seconds injection, which is target parameter, has achieved at 355 keV, 2.6MW, while pulse length was restricted up to 5.3 seconds by larger heat load of port limiter.
Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Chujo, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.
Nuclear Fusion, 43(7), p.606 - 613, 2003/07
no abstracts in English
Ishida, Shinichi; Abe, Katsunori*; Ando, Akira*; Cho, T.*; Fujii, Tsuneyuki; Fujita, Takaaki; Goto, Seiichi*; Hanada, Kazuaki*; Hatayama, Akiyoshi*; Hino, Tomoaki*; et al.
Nuclear Fusion, 43(7), p.606 - 613, 2003/07
Times Cited Count：33 Percentile：69.14(Physics, Fluids & Plasmas)no abstracts in English
Ushigusa, Kenkichi; Ide, Shunsuke; Oikawa, Toshihiro; Suzuki, Takahiro; Kamada, Yutaka; Fujita, Takaaki; Ikeda, Yoshitaka; Naito, Osamu; Matsuoka, Mamoru*; Kondoh, Takashi; et al.
Fusion Science and Technology (JT-60 Special Issue), 42(2-3), p.255 - 277, 2002/09
Times Cited Count：10 Percentile：15.15(Nuclear Science & Technology)Studies on non-inductive current drive and development of an integrated steady-state high performance operation in JT-60 are reviewed. Experiments on lower hybrid current drive in JT-60 haven shown a large non-inductive current up to 3.5MA, high current drive efficiency of 3.6x1019m-2A/W. Basic studies on LH waves in JT-60 have contributed to understand current drive physics. Significant progress in neutral beam current drive has been made in JT-60 by testing the performance of negative ion based NBI (N-NBI). The CD efficiency of ~1.5x1019m-2A /W, and N-NB driven current of ~1MA have been demonstrated in N-NBCD. Strongly localized driven current by electron cyclotron current drive was identified with a fundamental O-mode scheme. Efficiency of 0.5x1019m-2A/W and EC driven current of 0.2MA were achieved and suppression of neo-classical tearing mode was demonstrated. Based on these developments, two integrated steady-state operation scenarios were developed in JT-60, which are reversed magnetic shear (R/S) plasmas and high bp ELMy H-mode. In these operation regimes, discharges have been sustained near the steady-state current profile under full non-inductive current drive. High performance plasmas with a high nDotETio and at high normalized density were also produced under fully non-inductive condition in high bp ELMy H-mode and R/S mode.
Kuriyama, Masaaki; Akino, Noboru; Ebisawa, Noboru; Honda, Atsushi; Ito, Takao; Kawai, Mikito; Mogaki, Kazuhiko; Oga, Tokumichi; Ohara, Hiroshi; Umeda, Naotaka; et al.
Fusion Science and Technology (JT-60 Special Issue), 42(2-3), p.424 - 434, 2002/09
Times Cited Count：15 Percentile：67.86(Nuclear Science & Technology)no abstracts in English
