Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamaji, Akifumi*; Yamasaki, Daiki*; Okada, Tomoya*; Sakamoto, Kan*; Yamashita, Shinichiro
Proceedings of 2017 Water Reactor Fuel Performance Meeting (WRFPM 2017) (USB Flash Drive), 10 Pages, 2017/09
Features of the accident tolerant fuel performance were evaluated with FEMAXI-7 when the current Zircaloy(Zry) cladding is replaced with FeCrAl-ODS steel cladding (a type of oxide dispersion strengthened steel being developed under the Project on Development of Technical Basis for Safety Improvement at Nuclear Power Plants by Ministry of Economy, Trade and Industry (METI) of Japan) for BWR 99 type fuel rod. In particular, influences of the creep strain rate and thickness of the ODS cladding on the fuel temperature, fission gas release rate (FGR) and pellet-cladding mechanical interaction (PCMI) are investigated.
Sagisaka, Akito; Nishiuchi, Mamiko; Pirozhkov, A. S.; Ogura, Koichi; Sakaki, Hironao; Maeda, Shota; Pikuz, T.; Faenov, A. Ya.*; Fukuda, Yuji; Yogo, Akifumi; et al.
no journal, ,
High-intensity laser and thin-foil interactions produce high-energy particles, hard X-ray, high-order harmonics, and terahertz radiation. A proton beam driven by a high-intensity laser has received attention as a compact ion source for medical and other applications. We have performed several high intensity laser-matter interaction experiments using a thin-foil target irradiated by Ti:sapphire laser (J-KAREN) at JAEA. The pulse duration was typically 40 fs (FWHM). The electron density profiles of the preformed plasma were observed with the interferometer. The high temporal contrast laser system could reduce the preformed plasma. The maximum proton energy gradually increased as the laser performance improved and finally protons of 40 MeV energy were observed at the peak laser intensity of 1 10 W/cm.
Nishiuchi, Mamiko; Sakaki, Hironao; Sagisaka, Akito; Maeda, Shota; Pirozhkov, A. S.; Pikuz, T.; Faenov, A. Ya.*; Ogura, Koichi; Fukuda, Yuji; Matsukawa, Kenya*; et al.
no journal, ,
no abstracts in English
Maeda, Shota; Nishiuchi, Mamiko; Sakaki, Hironao; Sagisaka, Akito; Pirozhkov, A. S.; Pikuz, T.; Faenov, A. Ya.*; Ogura, Koichi; Fukuda, Yuji; Matsukawa, Kenya*; et al.
no journal, ,
In JAEA, the high energy ions generated by the interaction between Ultra-intense Ultra-Short pulse laser and thin-foil target is being studied. Irradiating condition must be optimized to generate higher energy ions while suppress the becoming gigantic of laser. It is necessary to know the physical phenomenon in plasma to determine the parameter to optimize from the information on the electron and neutron, X-rays, which are generated simultaneously with ion. In this study, in order to measure electron temperature accurately, an electron spectrometer was developed which have broad range (1-200 MeV). The detector is comprised of permanent magnets and a fluorescent plate, CCD camera. In the presentation, the result of the calibration experiment carried out using 4, 9, 12, 15 MeV quasi-monoenergetic electron beam in HIBMC will be reported. Moreover, response analysis method was inspected using PHITS which is particle transporting Monte Carlo simulation code, and will also report the result.
Sagisaka, Akito; Nishiuchi, Mamiko; Pirozhkov, A. S.; Ogura, Koichi; Sakaki, Hironao; Maeda, Shota; Pikuz, T.; Faenov, A. Y.*; Fukuda, Yuji; Kanasaki, Masato; et al.
no journal, ,
High-intensity laser and thin-foil interactions produce high-energy particles, hard X-ray, high-order harmonics, and terahertz radiation. A proton beam driven by a high-intensity laser has received attention as a compact ion source for medical and other applications. We have performed several high intensity laser-matter interaction experiments using a thin-foil target irradiated by Ti:sapphire laser (J-KAREN) at JAEA. The pulse duration was typically 40 fs (FWHM). The high-order harmonics (2nd4th) were observed with the spectrometer in the reflected direction. The maximum proton energy of 40 MeV energy were observed at the peak laser intensity of 110W/cm.
Sagisaka, Akito; Nishiuchi, Mamiko; Pirozhkov, A. S.; Ogura, Koichi; Sakaki, Hironao; Maeda, Shota*; Pikuz, T.; Faenov, A. Ya.*; Fukuda, Yuji; Kanasaki, Masato*; et al.
no journal, ,
High-intensity laser and thin-foil interactions produce high-energy particles, hard X-ray, high-order harmonics, and terahertz radiation. A proton beam driven by a high-intensity laser has received attention as a compact ion source for medical and other applications. We have performed several high intensity laser-matter interaction experiments using a thin-foil target irradiated by Ti:sapphire laser (J-KAREN) at JAEA. The pulse duration was typically 40 fs (FWHM). The high-order harmonics (2nd 4th) were observed with the spectrometer in the reflected direction. The maximum proton energy of 40 MeV energy were observed at the peak laser intensity of 110 W/cm.