Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yomogida, Takumi; Hashimoto, Tadashi; Okumura, Takuma*; Yamada, Shinya*; Tatsuno, Hideyuki*; Noda, Hirofumi*; Hayakawa, Ryota*; Okada, Shinji*; Takatori, Sayuri*; Isobe, Tadaaki*; et al.
Analyst, 149(10), p.2932 - 2941, 2024/03
In this study, we successfully applied a transition-edge sensor (TES) spectrometer as a detector for microbeam X-ray measurements from a synchrotron X-ray light source to determine uranium (U) distribution at the micro-scale and its chemical species in biotite obtained from the U mine. It is difficult to separate the fluorescent X-ray of the U L line at 13.615 keV from that of the Rb K line at 13.395 keV in the X-ray fluorescence spectrum with an energy resolution of approximately 220 eV of the conventional silicon drift detector (SDD). Meanwhile, the fluorescent X-rays of U L and Rb K were fully separated by TES with 50 eV energy resolution at the energy of around 13 keV. The successful peak separation by TES led to an accurate mapping analysis of trace U in micro-X-ray fluorescence measurements and a decrease in the signal-to-background ratio in micro-X-ray absorption near edge structure spectroscopy.
Nagoshi, Yasuto*; Fukahori, Takuya*; Okada, Hiroshi*; Takahashi, Akiyuki*; Shimodaira, Masaki; Ueda, Takashi*; Ogawa, Takuya*; Yashirodai, Kenji*; Takahashi, Yukio*; Ohata, Mitsuru*
Transactions of the 27th International Conference on Structural Mechanics in Reactor Technology (SMiRT 27) (Internet), 9 Pages, 2024/03
no abstracts in English
Mohamad, A. B.; Nemoto, Yoshiyuki; Furumoto, Kenichiro*; Okada, Yuji*; Sato, Daiki*
Corrosion Science, 224, p.111540_1 - 111540_15, 2023/11
Times Cited Count:0 Percentile:0.00(Materials Science, Multidisciplinary)Li, W.*; Yamada, Shinya*; Hashimoto, Tadashi; Okumura, Takuma*; Hayakawa, Ryota*; Nitta, Kiyofumi*; Sekizawa, Oki*; Suga, Hiroki*; Uruga, Tomoya*; Ichinohe, Yuto*; et al.
Analytica Chimica Acta, 1240, p.340755_1 - 340755_9, 2023/02
Times Cited Count:4 Percentile:52.44(Chemistry, Analytical)no abstracts in English
Okumura, Takuma*; Azuma, Toshiyuki*; Bennet, D. A.*; Caradonna, P.*; Chiu, I.-H.*; Doriese, W. B.*; Durkin, M. S.*; Fowler, J. W.*; Gard, J. D.*; Hashimoto, Tadashi; et al.
IEEE Transactions on Applied Superconductivity, 31(5), p.2101704_1 - 2101704_4, 2021/08
Times Cited Count:1 Percentile:10.16(Engineering, Electrical & Electronic)A superconducting transition-edge sensor (TES) microcalorimeter is an ideal X-ray detector for experiments at accelerator facilities because of good energy resolution and high efficiency. To study the performance of the TES detector with a high-intensity pulsed charged-particle beam, we measured X-ray spectra with a pulsed muon beam at the Japan Proton Accelerator Research Complex (J-PARC) in Japan. We found substantial temporal shifts of the X-ray energy correlated with the arrival time of the pulsed muon beam, which was reasonably explained by pulse pileup due to the incidence of energetic particles from the initial pulsed beam.
Okumura, Takuma*; Azuma, Toshiyuki*; Bennet, D. A.*; Caradonna, P.*; Chiu, I. H.*; Doriese, W. B.*; Durkin, M. S.*; Fowler, J. W.*; Gard, J. D.*; Hashimoto, Tadashi; et al.
Physical Review Letters, 127(5), p.053001_1 - 053001_7, 2021/07
Times Cited Count:15 Percentile:82.53(Physics, Multidisciplinary)We observed electronic X rays emitted from muonic iron atoms using a superconducting transition-edge-type sensor microcalorimeter. The energy resolution of 5.2 eV in FWHM allowed us to observe the asymmetric broad profile of the electronic characteristic and X rays together with the hypersatellite X rays around 6 keV. This signature reflects the time-dependent screening of the nuclear charge by the negative muon and the -shell electrons, accompanied by electron side-feeding. Assisted by a simulation, this data clearly reveals the electronic - and -shell hole production and their temporal evolution during the muon cascade process.
Hirota, Takatoshi*; Nagoshi, Yasuto*; Hojo, Kiminobu*; Okada, Hiroshi*; Takahashi, Akiyuki*; Katsuyama, Jinya; Ueda, Takashi*; Ogawa, Takuya*; Yashirodai, Kenji*; Ohata, Mitsuru*; et al.
Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 9 Pages, 2021/07
Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.
Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03
Times Cited Count:44 Percentile:96.99(Astronomy & Astrophysics)Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.
Okada, Yuji; Amaya, Masaki
Annals of Nuclear Energy, 145, p.107539_1 - 107539_8, 2020/09
Times Cited Count:0 Percentile:0.01(Nuclear Science & Technology)Ishikawa, Takatsugu*; Fujimura, Hisako*; Fukasawa, Hiroshi*; Hashimoto, Ryo*; He, Q.*; Honda, Yuki*; Hosaka, Atsushi; Iwata, Takahiro*; Kaida, Shun*; Kasagi, Jirota*; et al.
Physical Review C, 101(5), p.052201_1 - 052201_6, 2020/05
Times Cited Count:4 Percentile:43.57(Physics, Nuclear)Okada, Yuji; Amaya, Masaki
Annals of Nuclear Energy, 136, p.107028_1 - 107028_9, 2020/02
Times Cited Count:5 Percentile:52.06(Nuclear Science & Technology)Ito, Yuta*; Schury, P.*; Wada, Michiharu*; Arai, Fumiya*; Haba, Hiromitsu*; Hirayama, Yoshikazu*; Ishizawa, Satoshi*; Kaji, Daiya*; Kimura, Sota*; Koura, Hiroyuki; et al.
Physical Review Letters, 120(15), p.152501_1 - 152501_6, 2018/04
Times Cited Count:60 Percentile:93.38(Physics, Multidisciplinary)Masses of Es, Fm and the transfermium nuclei Md, and No, produced by hot- and cold-fusion reactions, in the vicinity of the deformed neutron shell closure, have been directly measured using a multi-reflection time-of-flight mass spectrograph. The masses of Es and Md were measured for the first time. Using the masses of Md as anchor points for decay chains, the masses of heavier nuclei, up to Bh and Mt, were determined. These new masses were compared with theoretical global mass models and demonstrated to be in good agreement with macroscopic-microscopic models in this region. The empirical shell gap parameter derived from three isotopic masses was updated with the new masses and corroborate the existence of the deformed neutron shell closure for Md and Lr.
Okudaira, Takuya*; Takada, Shusuke*; Hirota, Katsuya*; Kimura, Atsushi; Kitaguchi, Masaaki*; Koga, Jun*; Nagamoto, Kosuke*; Nakao, Taro*; Okada, Anju*; Sakai, Kenji; et al.
Physical Review C, 97(3), p.034622_1 - 034622_15, 2018/03
Times Cited Count:13 Percentile:72.96(Physics, Nuclear)Okada, Hiroshi*; Koya, Hirohito*; Kawai, Hiroshi*; Li, Y.; Osakabe, Kazuya*
Engineering Fracture Mechanics, 158, p.144 - 166, 2016/06
Times Cited Count:15 Percentile:53.10(Mechanics)The stress intensity factor (SIF) solutions of semi-elliptical cracks with high aspect ratios in plate and thick wall cylinder have been investigated under various assumed stress distributions. The authors have developed an automated analysis procedure to perform parametric studies on crack shapes and loading conditions. It consists of programs to perform automatic mesh generation, analysis execution including assignments of boundary conditions and SIF evaluations by virtual crack closure integral method. It was also found that SIF solutions for the thick wall cylinder and for the complex structure could be estimated by those for the flat plate.
Li, Y.; Hasegawa, Kunio; Katsumata, Genshichiro; Osakabe, Kazuya*; Okada, Hiroshi*
Journal of Pressure Vessel Technology, 137(5), p.051207_1 - 051207_8, 2015/10
Times Cited Count:8 Percentile:36.73(Engineering, Mechanical)A number of surface cracks with large aspect ratio have been detected in components of nuclear power plants in recent years. The depths of these cracks are even larger than the half of crack lengths. However, the solutions of the stress intensity factor were not provided for semi-elliptical surface cracks with large aspect ratio in the current fitness-for-service codes. In this study, in order to conduct integrity assessment for cracked components, the solutions of the stress intensity factor were calculated using finite element analysis for semi-elliptical surface cracks with large aspect ratio in plates. Solutions were provided at both the deepest and the surface points of the surface cracks. Some of solutions were compared with the available existing results. As the result, it was concluded that the solutions proposed in this paper are applicable in engineering applications.
Kiriyama, Hiromitsu; Mori, Michiaki; Suzuki, Masayuki*; Daito, Izuru*; Okada, Hajime; Ochi, Yoshihiro; Tanaka, Momoko; Sato, Masatoshi*; Tamaoki, Yoshinori*; Yoshii, Takehiro*; et al.
Reza Kenkyu, 42(6), p.441 - 447, 2014/06
We describe three specific high power laser systems that are being developed in our laboratory for many applications in high field science, nonlinear optics and material processing. We report on a femtosecond petawatt-class Ti:sapphire chirped-pulse amplification laser system that can produce a pulse energy of 20 J of 40 fs pulse duration, a picosecond high intensity Yb:YAG chirped-pulse amplification laser system that can generate a pulse energy of 100 mJ of 0.5 ps pulse duration, and a nanosecond high repetition rate Nd:YAG laser system that can provide an average power of 360 W with a pulse duration of 30 ns delivered at a 1 kHz repetition rate. We discuss the basic design aspects and present the results from our experimental investigations of these laser systems.
Tokuhisa, Atsushi*; Arai, Junya*; Jochi, Yasumasa*; Ono, Yoshiyuki*; Kameyama, Toyohisa*; Yamamoto, Keiji*; Hatanaka, Masayuki*; Gerofi, B.*; Shimada, Akio*; Kurokawa, Motoyoshi*; et al.
Journal of Synchrotron Radiation, 20(6), p.899 - 904, 2013/11
Times Cited Count:5 Percentile:29.00(Instruments & Instrumentation)Sonoda, Tetsu*; Wada, Michiharu*; Tomita, Hideki*; Sakamoto, Chika*; Takatsuka, Takaaki*; Furukawa, Takeshi*; Iimura, Hideki; Ito, Yuta*; Kubo, Toshiyuki*; Matsuo, Yukari*; et al.
Nuclear Instruments and Methods in Physics Research B, 295, p.1 - 10, 2013/01
Times Cited Count:21 Percentile:83.46(Instruments & Instrumentation)no abstracts in English
Suzuki, Masayuki; Kiriyama, Hiromitsu; Daito, Izuru; Okada, Hajime; Ochi, Yoshihiro; Sato, Masatoshi*; Yoshii, Takehiro*; Tamaoki, Yoshinori*; Maeda, Junya*; Matsuoka, Shinichi*; et al.
AIP Conference Proceedings 1465, p.53 - 57, 2012/07
Times Cited Count:0 Percentile:0.13(Physics, Applied)We have reported hundred mJ level, femtosecond pulse duration with the high temporal contrast in an OPCPA/Yb:YAG ceramic thin disk laser system at 10 Hz repetition rate. At an input laser pulse energy of 3.8 mJ from the OPCPA preamplifer the output energy of 130 mJ with spectral bandwidth of 2.5 nm has been obtained from multipass Yb:YAG ceramic thin disk amplifier, and the optical efficiency from LD energy to amplified laser pulse is 9.6%. The recompressed laser pulse duration was measured to be 450 fs. Because the compressor efficiency exceeds 73% the compressed pulse energy can potentially be as high as 95 mJ. The contrast level of this laser pulse was measured to be less than 7.210 at -150 ps. This novel laser system after further amplification using additional amplifiers can be useful for the laser-driven proton acceleration in future.
Okada, Masashi*; Niki, Kazuaki*; Hirayama, Yoshikazu*; Imai, Nobuaki*; Ishiyama, Hironobu*; Jeong, S. C.*; Katayama, Ichiro*; Miyatake, Hiroari*; Oyaizu, Mitsuhiro*; Watanabe, Yutaka*; et al.
Physical Review Special Topics; Accelerators and Beams, 15(3), p.030101_1 - 030101_10, 2012/03
Times Cited Count:5 Percentile:33.26(Physics, Nuclear)