Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
-phase in Al-Mg-Si alloys during aging treatmentAhmed, A.*; Uttarasak, K.*; Tsuchiya, Taiki*; Lee, S.*; Nishimura, Katsuhiko*; Nunomura, Norio*; Shimizu, Kazuyuki*; Hirayama, Kyosuke*; Toda, Hiroyuki*; Yamaguchi, Masatake; et al.
Journal of Alloys and Compounds, 988, p.174234_1 - 174234_9, 2024/06
This study aims to clarify the growth process of the-phase in Al-Mg-Si alloys from the point of view of morphology evolution. For this research, the -phase orientation relationship, shape, growth process, misfit value, and interfacial condition between the -phase and Al matrix were investigated using high-resolution transmission electron microscopy (HR-TEM), focus ion beam (FIB), and optical microscope (OM). Results include the identification of {111} facets at the edges of the -phase, as well as the proposal of two new three-dimensional shapes for the -phase. We purposed the morphology evolution during the growth process of Mg
Si crystal and calculated the misfit to understand the unstable (111) facet has a higher misfit value as compared to the (001) and (011) facets. Our observations provide how they influence the behavior of MgSi crystals.
Fujihara, Hiro*; Toda, Hiroyuki*; Ebihara, Kenichi; Kobayashi, Masakazu*; Mayama, Tsuyoshi*; Hirayama, Kyosuke*; Shimizu, Kazuyuki*; Takeuchi, Akihisa*; Uesugi, Masayuki*
International Journal of Plasticity, 174, p.103897_1 - 103897_22, 2024/03
Times Cited Count：0Hydrogen(H) embrittlement in high-strength aluminum(Al) alloys is a crucial problem. H accumulation at the interface of precipitates in Al alloy is considered to cause embrittlement. However, there is no quantitative knowledge regarding the interaction between H distribution and stress field near cracks. In this study, using a multi-modal three-dimensional image-based simulation combining the crystal plasticity finite element method and H diffusion analysis, we tried to capture the stress distribution near the crack, its influence on the H distribution, and the probability of crack initiation in the experimental condition. As a result, it was found that grain boundary cracks transition to quasi-cleavage cracks in the region where the cohesive energy of the semi-coherent interface of MgZn precipitates decreases due to H accumulation near the tip. We believe the present simulation method successfully bridges nanoscale delamination and macroscale brittle fracture.
Tang, J.*; Wang, Y.*; Fujihara, Hiro*; Shimizu, Kazuyuki*; Hirayama, Kyosuke*; Ebihara, Kenichi; Takeuchi, Akihisa*; Uesugi, Masayuki*; Toda, Hiroyuki*
Scripta Materialia, 239, p.115804_1 - 115804_5, 2024/01
Times Cited Count：0 Percentile：0(Nanoscience & Nanotechnology)Stress corrosion cracking (SCC) behaviors induced by the combination of external and internal hydrogen (H) in an Al-Zn-Mg-Cu alloy were systematically investigated via in situ 3D characterization techniques. SCC of the Al-Zn-Mg-Cu alloy could initiate and propagate in the potential crack region where the H concentration exceeded a critical value, in which the nanoscopic H-induced decohesion of 
-MgZn precipitates resulted in macroscopic cracking. External H that penetrated the alloy from the environment played a crucial role during the SCC of the Al-Zn-Mg-Cu alloy by generating gradient-distributed H-affected zones near the crack tips, which made Al alloys in water environment more sensitive to SCC. Additionally, the pre-existing internal H was driven toward the crack tips during plastic deformation. It was involved in the SCC and made contributions to both the cracks initiation and propagation.
Toda, Hiroyuki*; Tsuru, Tomohito; Yamaguchi, Masatake; Matsuda, Kenji*; Shimizu, Kazuyuki*; Hirayama, Kyosuke*
Kagaku, 75(10), p.48 - 53, 2020/10
Highly-concentrated precipitations play therefore dominant role in mechanical properties and hydrogen embrittlement of aluminum alloys. It has been considered that the coherent interface between matrix and precipitation does not contribute to the crack initiation and embrittlement due to its coherency. Here, we discovered the origin of unprecedented quasi-cleavage fracture mode. Hydrogen partitioning at various defect sites is investigated comprehensively combined with experiment, theory and first-principles calculations. We demonstrate that despite low excess free volume, the aluminum-precipitation interface is more preferable trap site than void and grain boundary. The cohesivity of the interface deteriorates significantly with increasing occupancy while hydrogen atoms are trapped stably up to extremely high occupancy equivalent to spontaneous cleavage.
hydrogen partitioning controlToda, Hiroyuki*; Yamaguchi, Masatake; Matsuda, Kenji*; Shimizu, Kazuyuki*; Hirayama, Kyosuke*; Su, H.*; Fujihara, Hiro*; Ebihara, Kenichi; Itakura, Mitsuhiro; Tsuru, Tomohito; et al.
Tetsu To Hagane, 105(2), p.240 - 253, 2019/02
Times Cited Count：0 Percentile：0(Metallurgy & Metallurgical Engineering)no abstracts in English
Shimizu, Kazuyuki*; Toda, Hiroyuki*; Fujihara, Hiro*; Hirayama, Kyosuke*; Yamaguchi, Masatake
no journal, ,
no abstracts in English
