Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sakai, Kenji; Obayashi, Hironari; Saito, Shigeru; Sasa, Toshinobu; Sugawara, Takanori; Watanabe, Akihiko*
JAEA-Technology 2019-009, 18 Pages, 2019/07
JAEA-Technology-2019-009.pdf:2.34MB
Construction of Transmutation Experimental Facility (TEF) is under planning in the Japan Proton Accelerator Research Complex (J-PARC) program to promote R&D on the transmutation technology with using accelerator driven systems (ADS). ADS Target Test Facility (TEF-T) in TEF will develop spallation target technology and study on target materials with irradiating high intensity proton beams on a lead-bismuth eutectic (LBE) target. For safe and efficient beam operation, a general control system (GCS) will be constructed in TEF-T. GCS comprises several subsystems, such as a network system (LAN), an integral control system (ICS), an interlock system (ILS), and a timing distribution system (TDS) according to their roles. Especially, the ICS plays the important role that executes integral operations in the entire facility, acquires, stores and distributes operation data. We planned to develop a prototype of the ICS, to evaluate its concrete performances such as data transmission speeds, data storage capability, control functions, long-term stability of the system, and to utilize them for design of the actual ICS. This report mentions to product the prototype of ICS and to apply it to remote operations of instruments for developing LBE target technology.
Mukugi, Ken*; Ouchi, Nobuo; Yoshikawa, Hiroshi; Hasegawa, Kazuo; Kusano, Joichi; Mizumoto, Motoharu; Kako, Eiji*; Saito, Kenji*; Noguchi, Shuichi*
Proceedings of 25th Linear Accelerator Meeting in Japan, p.314 - 316, 2000/07
no abstracts in English
; ; ; ; *; *; *; *
Nihon Genshiryoku Gakkai-Shi, 4(10), p.700 - 702, 1962/00
no abstracts in English
Ozeki, Kazuhide*; Yonemura, Masao*; Masuzawa, Toru*; Saito, Hidetoshi*; Ogoe, Yasuharu*; Hirakuri, Kenji*; Takeda, Masayasu
no journal, ,
Hydrogen content in the DLC film is very important factor because it greatly influences on its mechanical properties and microstructure such as hardness, wear resistance, surface roughness, and sp3/sp2 ratio. In the present study, we prepared the DLC film using plasma CVD technique varying H
/CH
ratio from 0 to 9. Cross-sectional hydrogen content and mass density profiles of the films were defined by neutron and X-ray reflectivity measurements, and the results were compared with that from ERDA analysis. And O/C atomic ratio of the oxide layer of the film surface was also analyzed using XPS. From the neutron and X-ray reflectivity analysis, hydrogen content and mass density in the DLC film increased with film depth from the surface, and average hydrogen content showed more than 30 % in all films. By combining with XPS results, it is clarified that hydrogen content in the surface layer was lower than that in bulk layer.
