Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Shimada, Mikio*; Tokumiya, Takumi*; Miyake, Tomoko*; Tsukada, Kaima*; Kanzaki, Norie; Yanagihara, Hiromi*; Kobayashi, Junya*; Matsumoto, Yoshihisa*
Journal of Radiation Research (Internet), 64(2), p.345 - 351, 2023/03
Times Cited Count：0 Percentile：0.01(Biology)Edao, Yuki; Sato, Katsumi; Iwai, Yasunori; Hayashi, Takumi
Journal of Nuclear Science and Technology, 53(11), p.1831 - 1838, 2016/11
Times Cited Count：8 Percentile：60.26(Nuclear Science & Technology)Oya, Yasuhisa*; Li, X.*; Sato, Misaki*; Yuyama, Kenta*; Oyaizu, Makoto; Hayashi, Takumi; Yamanishi, Toshihiko; Okuno, Kenji*
Journal of Nuclear Science and Technology, 53(3), p.402 - 405, 2016/03
Times Cited Count：10 Percentile：68.36(Nuclear Science & Technology)The deuterium (D) permeation behaviors for ion damaged tungsten (W) by 3 keV D
and 10 keV C were studied. The D permeability was obtained for un-damaged W at various temperatures. For both D and C implanted W, the permeability was clearly reduced. But, for the D implanted W, the permeability was recovered by heating at 1173 K and it was almost consistent with that for un-damaged W. In the case of C implanted W, the permeability was not recovered even if the sample was heated at 1173 K, indicating that the existence of carbon would prevent the recovery of permeation path in W. In addition, TEM observation showed the voids were grown by heating at 1173 K and not removed, showing the existence of damages would not largely influence on the hydrogen permeation behavior in W in the present study.
Isobe, Kanetsugu; Kawamura, Yoshinori; Iwai, Yasunori; Oyaizu, Makoto; Nakamura, Hirofumi; Suzuki, Takumi; Yamada, Masayuki; Edao, Yuki; Kurata, Rie; Hayashi, Takumi; et al.
Fusion Engineering and Design, 98-99, p.1792 - 1795, 2015/10
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Activities on Broader Approach (BA) were started in 2007 on the basis of the Agreement between the Government of Japan and the EURATOM. The period of BA activities consist of Phase1 and Phase2 dividing into Phase 2-1 (2010-2011), Phase 2-2 (2012-2013) and Phase 2-3 (2014-2016). Tritium technology was chosen as one of important R&D issues to develop DEMO plant. R&D activities of tritium technology on BA consist of four tasks. Task-1 is to prepare and maintain the tritium handling facility in Rokkasho BA site in Japan. Task 2, 3 and 4 are main R&D activities for tritium and these are focused on: Task-2) Development of tritium accountancy technology, Task-3) Development of basic tritium safety research, Task-4) Tritium durability test. R&D activities of tritium technology in Phase 2-2 were underway successfully and closed in 2013.
Nakajima, Kaoru*; Kitayama, Takumi*; Hayashi, Hiroaki*; Matsuda, Makoto; Sataka, Masao*; Tsujimoto, Masahiko*; Toulemonde, M.*; Bouffard, S.*; Kimura, Kenji*
Scientific Reports (Internet), 5, p.13363_1 - 13363_8, 2015/08
Times Cited Count：5 Percentile：41.15(Multidisciplinary Sciences)Oyaizu, Makoto; Isobe, Kanetsugu; Hayashi, Takumi
Fusion Science and Technology, 67(3), p.519 - 522, 2015/04
Times Cited Count：2 Percentile：17.57(Nuclear Science & Technology)The effects of tritiated water on the corrosion behavior of chromium were electrochemically studied by anodic polarization measurements with changing tritium concentration and dissolved oxygen concentration as parameters in the electrolyte of 0.01N sulfuric acid solution, self-passivation due to dissolved oxygen could be observed in pure water without tritium. As a result, it was found that the self-passivation was inhibited in tritiated electrolyte as shown in the previous studies for SUS304 stainless steel. It is indicated from the result that the passivation inhibitory effect for SUS304 stainless steel could be induced by dissolution of chromium in passivation film on SUS304 stainless steel.
Hayashi, Takumi; Nakamura, Hirofumi; Kawamura, Yoshinori; Iwai, Yasunori; Isobe, Kanetsugu; Yamada, Masayuki; Suzuki, Takumi; Kurata, Rie; Oyaizu, Makoto; Edao, Yuki; et al.
Fusion Science and Technology, 67(2), p.365 - 370, 2015/03
Times Cited Count：1 Percentile：9.74(Nuclear Science & Technology)Edao, Yuki; Kawamura, Yoshinori; Kurata, Rie; Fukada, Satoshi*; Takeishi, Toshiharu*; Hayashi, Takumi; Yamanishi, Toshihiko
Fusion Science and Technology, 67(2), p.320 - 323, 2015/03
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)The present study aims at obtaining fundamental knowledge for tritium transfer behavior and interaction between tritium and paint coated on concrete walls. The amounts of tritium penetration and release in cement paste with epoxy and urethane paint coatings were measured. The tritium penetration amounts were increased with the HTO exposure time. Time to achieve each saturate tritium value was more than 60 days for cement paste coated with epoxy paint and with urethane paint, while cement paste without paint took 2 days to achieve it. Tritium penetration rates were estimated by an analysis of diffusion model. Although their paint coatings were effective for reduction of tritium penetration through the cement paste exposed to HTO for a short period, the amount of tritium trapped in the paints became large for a long time. This work has been performed under the collaboration research between JAEA and Kyushu University.
Fukada, Satoshi*; Katayama, Kazunari*; Takeishi, Toshiharu*; Edao, Yuki; Kawamura, Yoshinori; Hayashi, Takumi; Yamanishi, Toshihiko
Fusion Science and Technology, 67(2), p.99 - 102, 2015/03
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Tsutsumi, Tomoaki*; Adachi, Rika*; Takatsuki, Satoshi*; Nei, Daisuke*; Kameya, Hiromi*; Todoriki, Setsuko*; Kikuchi, Masahiro; Kobayashi, Yasuhiko; Matsuda, Rieko*; Teshima, Reiko*
Shokuhin Shosha, 49(1), p.9 - 15, 2014/12
no abstracts in English
Enoeda, Mikio; Tanigawa, Hisashi; Hirose, Takanori; Nakajima, Motoki; Sato, Satoshi; Ochiai, Kentaro; Konno, Chikara; Kawamura, Yoshinori; Hayashi, Takumi; Yamanishi, Toshihiko; et al.
Fusion Engineering and Design, 89(7-8), p.1131 - 1136, 2014/10
Times Cited Count：21 Percentile：84.18(Nuclear Science & Technology)The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. Regarding the fabrication technology development using F82H, the fabrication of a real scale mockup of the back wall of TBM was completed. Also the assembling of the complete box structure of the TBM mockup and planning of the pressurization testing was studied. The development of advanced breeder and multiplier pebbles for higher chemical stability was performed for future DEMO blanket application. From the view point of TBM test result evaluation and DEMO blanket performance design, the development of the blanket tritium simulation technology, investigation of the TBM neutronics measurement technology and the evaluation of tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been performed.
Nakamura, Makoto; Tobita, Kenji; Gulden, W.*; Watanabe, Kazuhito*; Someya, Yoji; Tanigawa, Hisashi; Sakamoto, Yoshiteru; Araki, Takao*; Matsumiya, Hisato*; Ishii, Kyoko*; et al.
Fusion Engineering and Design, 89(9-10), p.2028 - 2032, 2014/10
Times Cited Count：13 Percentile：70.2(Nuclear Science & Technology)After the Fukushima Dai-ichi nuclear accident, a social need for assuring safety of fusion energy has grown gradually in the Japanese (JA) fusion research community. DEMO safety research has been launched as a part of BA DEMO Design Activities (BA-DDA). This paper reports progress in the fusion DEMO safety research conducted under BA-DDA. Safety requirements and evaluation guidelines have been, first of all, established based on those established in the Japanese ITER site invitation activities. The amounts of radioactive source terms and energies that can mobilize such source terms have been assessed for a reference DEMO, in which the blanket technology is based on the Japanese fusion technology R&D programme. Reference event sequences expected in DEMO have been analyzed based on the master logic diagram and functional FMEA techniques. Accident initiators of particular importance in DEMO have been selected based on the event sequence analysis.
Kawamura, Yoshinori; Edao, Yuki; Iwai, Yasunori; Hayashi, Takumi; Yamanishi, Toshihiko
Fusion Engineering and Design, 89(7-8), p.1539 - 1543, 2014/10
Times Cited Count：8 Percentile：53.31(Nuclear Science & Technology)Tritium recovery system using adsorption or catalytic isotope exchange has already been proposed for a solid breeding blanket system of a nuclear fusion reactor. Synthetic zeolite is often used as an adsorbent or a substrate of chemical exchange catalyst. And, it is well known that its properties are changed easily by exchanging their cations. So, in this work, adsorption capacities of hydrogen isotope and water vapor on cation-exchanged mordenite with transition metal ion were investigated. Ag ion-exchanged mordenite (Ag-MOR) has indicated considerably large hydrogen adsorption capacity in lower pressure range at 77 K. And, adsorption capacity of water vapor did not so vary with exchaned cation in comparison with hydrogen adsorption. The discussion from the viewpoint of adsorption rate is still remaining, but more compact cryosorption column for tritium recovery system is possible to design if Ag-MOR is adopted.
Hayashi, Takumi; Isobe, Kanetsugu; Nakamura, Hirofumi; Kobayashi, Kazuhiro; Oya, Yasuhisa*; Okuno, Kenji*; Oyaizu, Makoto; Edao, Yuki; Yamanishi, Toshihiko
Fusion Engineering and Design, 89(7-8), p.1520 - 1523, 2014/10
Times Cited Count：1 Percentile：8.88(Nuclear Science & Technology)Tritium confinement is the most important safety issue in the fusion reactor. Tritium behavior on the water metal boundary is very important to design tritium plant with breading blanket system using cooling water. A series of tritium permeation experiment into pressurized water or water vapor jacket with He or Ar have been performed through pure iron piping with/without 7 micro-meter gold plating, which contained about 1 kPa of pure tritium gas at 423 K, with monitoring the chemical forms of tritium. Also, deuterium permeation experiments from heavy water vessel through various metal piping, such as pure iron (Fe), nickel (Ni), stainless steel (SS304), and pure iron with 10 micro-meter gold plating, were performed at 573 K and at 15 MPa. Recently, using the above heavy water system, we have succeeded to detect simultaneous hydrogen isotopes transfer from and to the metal surface by introducing H gas to the metal piping after stabilized deuterium permeation was detected.
Nakamura, Makoto; Tobita, Kenji; Someya, Yoji; Tanigawa, Hisashi; Gulden, W.*; Sakamoto, Yoshiteru; Araki, Takao*; Watanabe, Kazuhito*; Matsumiya, Hisato*; Ishii, Kyoko*; et al.
Plasma and Fusion Research (Internet), 9, p.1405139_1 - 1405139_11, 2014/10
Key aspects of the safety study of a water-cooled fusion DEMO reactor is reported. Safety requirements, dose target, DEMO plant model and confinement strategy of the safety study are briefly introduced. The internal hazard of a water-cooled DEMO, i.e. radioactive inventories, stored energies that can mobilize these inventories and accident initiators and scenarios, are evaluated. It is pointed out that the enthalpy in the first wall/blanket cooling loops, the decay heat and the energy potentially released by the Be-steam chemical reaction are of special concern for the water-cooled DEMO. An ex-vessel loss-of-coolant of the first wall/blanket cooling loop is also quantitatively analyzed. The integrity of the building against the ex-VV LOCA is discussed.
Yamanishi, Toshihiko; Nakamura, Hirofumi; Kawamura, Yoshinori; Iwai, Yasunori; Isobe, Kanetsugu; Oyaizu, Makoto; Yamada, Masayuki; Suzuki, Takumi; Hayashi, Takumi
Fusion Engineering and Design, 87(5-6), p.890 - 895, 2012/08
Times Cited Count：1 Percentile：10.14(Nuclear Science & Technology)In JAEA, the tritium processing and handling technologies have been studied at TPL. The main basic R&D activities in this field are: the tritium processing technology for the blanket recovery system; the tritium behavior in a confinement; and detritiation and decontamination. The R&D for tritium processing and handling technologies to a demonstration reactor (DEMO) are also planned to be carried out in the Broader Approach (BA) program in Japan by JAEA with Japanese universities. The ceramic electrolysis cell has been studied as a tritium processing method for the blanket system. The permeation behavior of tritium through pure iron into the gas containing water vapor has been studied. As for the behavior of high concentration tritium water, it was observed that the formation of the oxidized layer was prevented by the presence of tritium in water. Tritium durability tests were also carried out for the electrolysis cell of the chemical exchange column.
Kawamura, Yoshinori; Ochiai, Kentaro; Hoshino, Tsuyoshi; Kondo, Keitaro*; Iwai, Yasunori; Kobayashi, Kazuhiro; Nakamichi, Masaru; Konno, Chikara; Yamanishi, Toshihiko; Hayashi, Takumi; et al.
Fusion Engineering and Design, 87(7-8), p.1253 - 1257, 2012/08
Times Cited Count：15 Percentile：73.47(Nuclear Science & Technology)Tritium generation and recovery study on lithium ceramic packed bed was started by use of FNS in JAEA. Lithium titanate was selected as tritium breeding material. In this work, the effect of sweep gas species on tritium release behavior was investigated. In case of sweep by helium with 1% of hydrogen, tritium in water form was released sensitively corresponding to the irradiation. This is due to existence of the water vapor in the sweep gas. On the other hand, in case of sweep by dry helium, tritium in gaseous form was released first, and release of tritium in water form was delayed and was gradually increased.
Hayashi, Takumi; Nakamura, Hirofumi; Isobe, Kanetsugu; Kobayashi, Kazuhiro; Oyaizu, Makoto; Yamanishi, Toshihiko; Oya, Yasuhisa*; Okuno, Kenji*
Fusion Engineering and Design, 87(7-8), p.1333 - 1337, 2012/08
Times Cited Count：8 Percentile：52.49(Nuclear Science & Technology)In order to investigate the behavior of hydrogen isotope on the water-metal boundary, deuterium permeation experiments from heavy water vessel through various metal piping, such as pure iron (Fe), nickel (Ni), stainless steel (SS304), and pure iron with 10 
m gold plating, were performed at 573 K and at 15 MPa. During the experiment, surfaces of metal piping except gold plating one were oxidized at the heavy water boundary and then deuterium would generate by the oxidation reactions. This deuterium could be detected by mass spectrometer, which monitored the inside gases of the piping under vacuum. The result showed clearly that the deuterium permeated through Fe, Ni, and SS304 piping was detected as deuterium gas (D) under vacuum, though that through gold plating one could not be detected effectively. The D permeation rate through Fe, Ni, and SS304 piping reached some stabilized value. This paper summarizes the above experimental results and discusses the mechanism of deuterium behavior on the water metal boundary.
Fukada, Satoshi*; Edao, Yuki*; Sato, Koichi*; Takeishi, Toshiharu*; Katayama, Kazunari*; Kobayashi, Kazuhiro; Hayashi, Takumi; Yamanishi, Toshihiko; Hatano, Yuji*; Taguchi, Akira*; et al.
Fusion Engineering and Design, 87(1), p.54 - 60, 2012/01
Times Cited Count：4 Percentile：31.96(Nuclear Science & Technology)An experimental study on tritium (T) transfer in porous concrete for the tertiary T safety containment is performed to investigate (1) how fast HTO penetrates through concrete walls, (2) how well concrete walls contaminated with water-soluble T are decontaminated by a solution-in-water technique, and (3) how well hydrophobic paint coating works as a protecting film against HTO migrating through concrete walls. The epoxy paint coating can work as a HTO diffusion barrier and the PRF value is around 1/10. The silicon paint coating cannot work as the anti-T permeation barrier, because water deteriorates contact between the paint and cement or mortar.
Kobayashi, Kazuhiro; Nakamura, Hirofumi; Hayashi, Takumi; Yamanishi, Toshihiko
Fusion Science and Technology, 60(4), p.1335 - 1338, 2011/11
Times Cited Count：1 Percentile：10.73(Nuclear Science & Technology)In a fusion reactor of high safety and acceptability, safety confinement of tritium is one of key issues for the fusion reactor. Tritium should be well-controlled and not excessively released to environment and to prevent workers from excess exposure. Especially, the hot cell and tritium facility of ITER will be used various construction materials such as the concrete and the organic materials. Transport properties of tritiated water vapor (HTO) in the epoxy paint has been evaluated by the HTO exposure and removal behavior from the epoxy paint in order to obtain the data base of tritium behavior in the confinement facilities such as the hot cell or the tritium plant building of ITER.
