Development of safety design technologies for sodium-cooled fast reactor coupled to thermal energy storage system with sodium-molten salt heat exchanger

Yamano, Hidemasa; Kurisaka, Kenichi; Takano, Kazuya; Kikuchi, Shin; Kondo, Toshiki; Umeda, Ryota; Shirakura, Shota*; Hayashi, Masaaki*

Proceedings of 8th International Conference on New Energy and Future Energy Systems (NEFES 2023) (Internet), p.27 - 34, 2023/00

https://doi.org/10.3233/ATDE231072

This project studies investigation on safety design guideline and risk assessment technology for sodium-cooled fast reactor with the molten-salt heat storage system, development of evaluation method for heat transferring performance between sodium and molten-salt and improvement of the performance, and evaluation of chemical reaction characteristic between sodium and molten-salt and improvement of its safety. The project overview is presented in this report.

Evaluation of sediment and Cs redistribution in the Oginosawa River catchment near the Fukushima Dai-ichi Nuclear Power Plant using integrated watershed modeling

Sakuma, Kazuyuki; Malins, A.; Funaki, Hironori; Kurikami, Hiroshi; Niizato, Tadafumi; Nakanishi, Takahiro; Mori, Koji*; Tada, Kazuhiro*; Kobayashi, Takamaru*; Kitamura, Akihiro; et al.

Journal of Environmental Radioactivity, 182, p.44 - 51, 2018/02

https://doi.org/10.1016/j.jenvrad.2017.11.021

The Oginosawa River catchment lies 15 km south-west of the Fukushima Dai-ichi nuclear plant. The General-purpose Terrestrial Fluid-flow Simulator (GETFLOWS) code was used to study sediment and Cs redistribution within the catchment. Cesium-137 input to watercourses came predominantly from land adjacent to river channels and forest gullies. Forested areas far from the channels only made a minor contribution to Cs input to watercourses, total erosion of between 0.001-0.1 mm from May 2011 to December 2015. The 2.3-6.9% y decrease in the amount of Cs in forest topsoil over the study period can be explained by radioactive decay (approximately 2.3% y), along with a migration downwards into subsoil and a small amount of export. The amount of Cs available for release from land adjacent to rivers is expected to be lower in future than compared to this study period, as the simulations indicate a high depletion of inventory from these areas.

Establishment of experimental system for Mo/Tc production by neutron activation method

Ishida, Takuya; Shiina, Takayuki*; Ota, Akio*; Kimura, Akihiro; Nishikata, Kaori; Shibata, Akira; Tanase, Masakazu*; Kobayashi, Masaaki*; Sano, Tadafumi*; Fujihara, Yasuyuki*; et al.

JAEA-Technology 2015-030, 42 Pages, 2015/11

JAEA-Technology-2015-030.pdf:4.82MB

The research and development (R&D) on the production of Mo/Tc by neutron activation method ((n, ) method) using JMTR has been carried out in the Neutron Irradiation and Testing Reactor Center. The specific radioactivity of Mo by (n, ) method is extremely low compared with that by fission method ((n,f) method), and as a result, the radioactive concentration of the obtained Tc solution is also lowered. To solve the problem, we propose the solvent extraction with methyl ethyl ketone (MEK) for recovery of Tc from Mo produced by (n, ) method. We have developed the Mo/Tc separation/extraction/concentration devices and have carried out the performance tests for recovery of Tc from Mo produced by (n, ) method. In this paper, in order to establish an experimental system for Mo/Tc production, the R&D results of the system are summarized on the improvement of the devices for high-recovery rate of Tc, on the dissolution of the pellets, which is the high-density molybdenum trioxide (MoO) pellets irradiated in Kyoto University Research Reactor (KUR), on the production of Tc, and on the inspection of the recovered Tc solutions.

Elaboration of the system based code concept; Activities in JSME and ASME, 1; Overview

Asayama, Tai; Miyagawa, Takayuki*; Dozaki, Koji*; Kamishima, Yoshio*; Hayashi, Masaaki*; Machida, Hideo*

Proceedings of 22nd International Conference on Nuclear Engineering (ICONE-22) (DVD-ROM), 7 Pages, 2014/07

https://doi.org/10.1115/ICONE22-30567

This paper is the first one of the series of four papers that describe ongoing activities in the Japan Society of Mechanical Engineers (JSME) and the American Society of Mechanical Engineers (ASME) on the elaboration of the System Based Code (SBC) concept. A brief introduction to the SBC concept is followed by the technical features of structural evaluation methodologies that are based on the SBC concept. Also described is the ongoing collaboration of JSME and ASME at the Joint Task Group for System Based Code established in the ASME Boiler and Pressure Vessel Code Committee which is developing alternative rules for ASME B&PV Code Section XI Division 3, inservice inspection requirements for liquid metal reactor components.

Fabrication of enzyme-degradable and size-controlled protein nanowires using single particle nano-fabrication technique

Omichi, Masaaki*; Asano, Atsushi*; Tsukuda, Satoshi*; Takano, Katsuyoshi*; Sugimoto, Masaki; Saeki, Akinori*; Sakamaki, Daisuke*; Onoda, Akira*; Hayashi, Takashi*; Seki, Shu*

Nature Communications (Internet), 5, p.3718_1 - 3718_8, 2014/04

https://doi.org/10.1038/ncomms4718

Protein nanowires exhibiting specific biological activities hold promise for interacting with living cells and controlling and predicting biological responses such as apoptosis, endocytosis and cell adhesion. Here we report the result of the interaction of a single high-energy charged particle with protein molecules. Degradation of the human serum albumin nanowires was examined using trypsin. The biotinylated human serum albumin nanowires bound avidin, demonstrating the high affinity of the nanowires. Human serum albumin-avidin hybrid nanowires were also fabricated from a solid state mixture and exhibited good mechanical strength. The biotinylated human serum albumin nanowires can be transformed into nanowires exhibiting a biological function such as avidin-biotinyl interactions and peroxidase activity. The present technique is a versatile platform for functionalizing the surface of any protein molecule with an extremely large surface area.

Development of Tc production from (n, ) Mo

Tanase, Masakazu*; Shiina, Takayuki*; Kimura, Akihiro; Nishikata, Kaori; Fujisaki, Saburo*; Ota, Akio*; Kobayashi, Masaaki*; Yamamoto, Asaki*; Kawauchi, Yukimasa*; Tsuchiya, Kunihiko; et al.

Proceedings of 5th International Symposium on Material Testing Reactors (ISMTR-5) (Internet), 9 Pages, 2012/10

http://www.murr.missouri.edu/ismtr/papercall/Papers/Chiyoda%20Technol/Tanase_M=PAPER_Dev%20of%20Tc99m%20Prod%20from%20n-g%20Mo99.pdf

Tc is used as a radiopharmaceutical and manufactured from the parent nuclide of Mo. Extraction method of Tc from (n, ) Mo have been developed, as a part of the industrial use expansion after JMTR will re-start. In this research, the method proposed would be applicable to a practical production of Tc obtained from (n, ) Mo in large quantities. The method proposed would be applicable to a practical production of Tc obtained from (n, ) Mo in large quantities.

Review on the seismic safety of JRR-3 according to the revised regulatory code on seismic design for nuclear reactors

Kobayashi, Tetsuya; Araki, Masaaki; Oba, Toshinobu; Torii, Yoshiya; Takeuchi, Masaki*

JAEA-Conf 2011-003, p.83 - 86, 2012/03

https://jopss.jaea.go.jp/pdfdata/JAEA-Conf-2011-003.pdf

Spectroscopic characterization of -FeSi single crystals and homoepitaxial -FeSi films by XPS and XAS

Esaka, Fumitaka; Yamamoto, Hiroyuki; Udono, Haruhiko*; Matsubayashi, Nobuyuki*; Yamaguchi, Kenji; Shamoto, Shinichi; Magara, Masaaki; Kimura, Takaumi

Applied Surface Science, 257(7), p.2950 - 2954, 2011/01

https://doi.org/10.1016/j.apsusc.2010.10.097

Chemical state analysis by a combination of X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) using synchrotron radiation is performed for -FeSi single crystals and homoepitaxial -FeSi films. The Si 2p XPS and Fe L-edge XAS spectra imply that the annealing at 1173 K to remove native oxide layers on the crystal induces the formation of FeSi in the surface. The formation of FeSi is also confirmed by Si K-edge XAS analysis. For the homoepitaxial -FeSi films grown on the crystals, the Si K-edge XAS spectra indicate that structurally homogeneous -FeSi films can be grown on the -FeSi single crystals when the substrate temperatures of 973 and 1073 K are applied for molecular beam epitaxy (MBE). Consequently, it is indicated that the combination of XPS and XAS using synchrotron radiation is a useful tool to clarify chemical states nondestructively.

Introduction to plasma fusion energy

Takamura, Shuichi*; Kado, Shinichiro*; Fujii, Takashi*; Fujiyama, Hiroshi*; Takabe, Hideaki*; Adachi, Kazuo*; Morimiya, Osamu*; Fujimori, Naoji*; Watanabe, Takayuki*; Hayashi, Yasuaki*; et al.

Kara Zukai, Purazuma Enerugi No Subete, P. 164, 2007/03

no abstracts in English

Overview of the national centralized tokamak programme

Kikuchi, Mitsuru; Tamai, Hiroshi; Matsukawa, Makoto; Fujita, Takaaki; Takase, Yuichi*; Sakurai, Shinji; Kizu, Kaname; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; et al.

Nuclear Fusion, 46(3), p.S29 - S38, 2006/03

https://doi.org/10.1088/0029-5515/46/3/S05

The National Centralized Tokamak (NCT) facility program is a domestic research program for advanced tokamak research to succeed JT-60U incorporating Japanese university accomplishments. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility and mobility is pursued in aspect ratio and shape controllability, feedback control of resistive wall modes, wide current and pressure profile control capability for the demonstration of the high-b steady state.