Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ohashi, Yusuke; Shimaike, Masamitsu; Matsumoto, Takashi; Takahashi, Nobuo; Yokoyama, Kaoru; Morimoto, Yasuyuki
Nuclear Technology, 209(5), p.777 - 786, 2023/05
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)At the Ningyo-Toge Center, technical development related to uranium refining conversion and enrichment has been completed, and decommissioning of these facilities has begun. The error between the quantity of dismantled materials estimated from the facility design drawings and the actual quantity of dismantled materials was minimal when averaging over the entire Uranium Refining and Conversion Plant and Uranium Enrichment Engineering Facility, which results indicated that the preliminary estimate of the quantity of dismantled materials for decommissioning was reasonable. Most of the dismantled materials, which have no contamination history and are properly managed were able to be carried out to recyclers as non-radioactive waste (NR). In addition, the possibility of evaluating the uranium concentration of clearance level in dismantled objects was confirmed through gamma-ray measurement tests using mock-up waste.
Umezawa, Katsuhiro; Morimoto, Yasuyuki; Nakayama, Takuya; Nakagiri, Toshio
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 6 Pages, 2019/05
In December 2016, the Ningyo-toge Environmental Engineering Center of Japan Atomic Energy Agency (JAEA Ningyo-toge) announced new concept of "Uranium and Environmental Research Platform". As part of the concept, uranium waste engineering research are now undergoing. The objective of the research is to establish the processing technology for safely and reasonable disposal of uranium waste. In particular, estimation of the amount of uranium and harmful substances and development of technologies to reduce their concentration in the waste to the permissive level for the disposal in shallow ground disposal are needed. We are now developing the technologies to reduce the concentration of uranium and harmful substances shown below. (1) Survey on uranium inventory. Uranium waste is now stored in 10-odd thousands of 200 L drums. We are surveying amount and chemical form of uranium in the drums. (2) Development of decontamination technology of metal and concrete waste. We are investigating decontamination methods for metals and concrete contaminated with uranium. (3) Development of technologies to remove, detoxify and fix the harmful substances. We are surveying the types and amounts of harmful substances in waste. In addition, we are investigating the method to remove, detoxify, and fix harmful substances. (4) Measurement technology of uranium radioactivity. We are investigating and examining ways to improve the quantitative accuracy of measurement and shorten the measurement time. (5) Development of uranium removal technology from sludge. We are investigating new processing method to remove uranium from sludge which is applicable for several kind of sludge. The results of these technological developments and environmental research will be reflected to "small-scale field test" and "disposal demonstration test" which are planned for demonstration of the uranium waste disposal technology.
Nakayama, Takuya; Yagi, Naoto; Sato, Kazuhiko; Hinoda, Shingo; Nakagiri, Toshio; Morimoto, Yasuyuki; Umezawa, Katsuhiro; Sugitsue, Noritake
JAEA-Review 2018-005, 163 Pages, 2018/03
JAEA-Review-2018-005.pdf:72.95MB
The Ningyo-toge Environmental Engineering Center of JAEA has been working together with local communities for more than 60 years. Through our R&D projects on from uranium exploration to uranium enrichment as a part of the nuclear fuel cycle (i.e., front-end), we have accumulated experiences in the fields of management of uranium related technology. Taking advantage of such our potential, we will start new R&D program on "Research on Uranium and the Environment". In December 2016 we announced our new concept of the "Uranium and Environmental Research Platform" as a framework aimed at contributing to regional and international society through R&D programs (environmental research and uranium waste engineering research) that are needed to steadily carry out decommissioning of uranium handling facilities.
Terunuma, Akihiro; Mimura, Ryuji; Nagashima, Hisao; Aoyagi, Yoshitaka; Hirokawa, Katsunori*; Uta, Masato; Ishimori, Yuu; Kuwabara, Jun; Okamoto, Hisato; Kimura, Yasuhisa; et al.
JAEA-Review 2016-008, 98 Pages, 2016/07
JAEA-Review-2016-008.pdf:11.73MB
Japan Atomic Energy Agency formulated the plan to achieve the medium-term target in the period of April 2010 to March 2015(hereinafter referred to as "the second medium-term plan"). JAEA determined the plan for the business operations of each year (hereinafter referred to as "the year plan"). This report is that the Sector of Decommissioning and Radioactive Waste Management has summarized the results of the decommissioning technology development and decommissioning of nuclear facilities which were carried out in the second medium-term plan.
Matsumoto, Takashi; Morimoto, Yasuyuki; Takahashi, Nobuo; Takata, Masaharu; Yoshida, Hideaki; Nakashima, Shinichi; Ishimori, Yuu
JAEA-Technology 2015-036, 60 Pages, 2016/01
JAEA-Technology-2015-036.pdf:9.15MB
The Enrichment Engineering Facilities of the Ningyo-toge Environmental Engineering Center was constructed in order to establish the technical basis of the uranium enrichment plant in Japan. Uranium enrichment tests, using natural and reprocessed uranium, were carried out from 1979 to 1990 at two types of plants in the facilities. UF
handling equipment and Supplemental equipment in these plants are intended to be dismantled by 2019 in order to make places for future projects, for example, inventory investigation, precipitation treatment, etc. This report shows the basic plan of this decommissioning project and presents the current state of dismantling in the first-half of the fiscal year of 2014, with indicating its schedule, procedure, situation, results, and so on. The dismantled materials generated amounted to 37 mesh containers and 199 drums, and the secondary waste generated amounted to 271.4 kg.
Izumo, Sari; Usui, Hideo; Kubota, Shintaro; Tachibana, Mitsuo; Kawagoshi, Hiroshi; Takahashi, Nobuo; Morimoto, Yasuyuki; Tokuyasu, Takashi; Tanaka, Yoshio; Sugitsue, Noritake
JAEA-Technology 2014-021, 79 Pages, 2014/07
JAEA-Technology-2014-021.pdf:22.8MB
Japan Atomic Energy Agency has developed PROject management data evaluation code for DIsmantling Activities (PRODIA) to make an efficient decommissioning for nuclear facilities. PRODIA is a source code which provides estimated value such as manpower needs, costs, etc., for dismantling by evaluation formulas according to the type of nuclear facility. Evaluation formulas of manpower needs for dismantling of equipments about reprocessed uranium conversion in Uranium Refining and Conversion Plant are developed in this report. In the result, 7 formulas for prepare process, 24 formulas for dismantling process and 8 formulas for clean-up process are derived. It is confirmed that an unified evaluation formula can be used instead of 8 formulas about dismantling process of steel equipment for uranium conversion process, and 3 types of simplified formula can be used for preparation process and clean-up process respectively.
Sugitsue, Noritake; Morimoto, Yasuyuki; Tokuyasu, Takashi; Tanaka, Yoshio
Nihon Genshiryoku Gakkai Wabun Rombunshi, 12(3), p.242 - 256, 2013/09
This technical report showed the situation of the dismantling of the main equipment in the radiation controlled area of a uranium refining and conversion plant. And, the dismantling which we did is the work of the beginning of a uranium refining and conversion plant decommissioning project. We started dismantling in April 2008, and finished dismantling of the main equipment in a radiation controlled area in 29 September 2011. The dismantling waste and equipment was stored in the 200 little drum. All the contamination equipment can be sealed and kept in this stage. The radioactivity inventory of a uranium refining and conversion plant does not change in this stage. However, the risk of contamination by aged deterioration of this facility became remarkable small. Moreover, we were able to get many information and experience about dismantling.
Izumo, Sari; Usui, Hideo; Tachibana, Mitsuo; Morimoto, Yasuyuki; Takahashi, Nobuo; Tokuyasu, Takashi; Tanaka, Yoshio; Sugitsue, Noritake
Proceedings of 15th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM 2013) (CD-ROM), 9 Pages, 2013/09
Times Cited Count：0 Percentile：0.1(Engineering, Environmental)Usui, Hideo; Izumo, Sari; Shibahara, Yuji; Morimoto, Yasuyuki; Tokuyasu, Takashi; Takahashi, Nobuo; Tanaka, Yoshio; Sugitsue, Noritake; Tachibana, Mitsuo
Proceedings of International Waste Management Symposia 2012 (WM2012) (CD-ROM), 13 Pages, 2012/02
Dismantling of dry conversion facility in the uranium refining and conversion plant at Ningyo-toge began in 2008. During dismantling activities, project management data have been collected. Establishment of the calculation formula for dismantling of each kind of equipment makes it possible to evaluate manpower for dismantling the whole facility. However, it is not easy to prepare calculation formula for all kinds of equipment in the facility. Therefore, a simpler evaluation method was considered to calculate manpower based on facility characteristics. The results showed promise for evaluating dismantling manpower with respect to each chemical process. To create an effective dismantling plan, it is necessary to carefully consider use of a GH preliminarily. Thus, an evaluation method of project management data such as manpower and secondary waste generation was considered. The results showed promise for evaluating project management data of GH by using established calculation formula.
Zaima, Naoki; Morimoto, Yasuyuki; Sugitsue, Noritake; Kado, Kazumi
Proceedings of 13th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM 2010) (CD-ROM), p.311 - 320, 2010/10
Takahashi, Nobuo; Yokoyama, Kaoru; Morimoto, Yasuyuki; Shimaike, Masamitsu; Ikegami, Sohei; Sugitsue, Noritake
JAEA-Technology 2010-003, 92 Pages, 2010/06
JAEA-Technology-2010-003.pdf:10.76MB
At the reprocessed uranium conversion facilities, Hydration and Conversion room-1,2,3, Dehydration and Conversion room-1,2, Dry process filter room have been dismantled according to the schedule, in 2009 fiscal year. The 
-ray measurement had been carried out before dismantlement to evaluate the radioactivity inventory. As a result, the uranium recovery work was forecasted for reasonable dismantlement. In addition, the feature nuclide affecting the results of the measurement on the air dose was evaluated. Additionally, as the waste data, -ray analysis results are shown.
; ; ; ; ; *; Kaneko, Masaaki*
JNC TJ6400 2002-004, 68 Pages, 2003/02
JNC-TJ6400-2002-004.pdf:5.98MB
None
; Obayashi, Hiroshi; ; *; Fukui, Toshiki*; Arai, Kazuhiro*
JNC TJ6410 2002-013, 38 Pages, 2002/02
JNC-TJ6410-2002-013.pdf:1.18MB
no abstracts in English
Kawatsuma, Shinji; Takebe, Shinichi; Ouchi, Masaru; Kozawa, Kazushige; Yagi, Naoto; Sato, Kazuhiko; Morimoto, Yasuyuki; Fukushima, Tadashi; Ishibashi, Makoto*
no journal, ,
no abstracts in English
Kawatsuma, Shinji; Ishibashi, Makoto*; Morimoto, Yasuyuki
no journal, ,
no abstracts in English
Takahashi, Nobuo; Shimaike, Masamitsu; Morimoto, Yasuyuki; Ikegami, Sohei; Sugitsue, Noritake
no journal, ,
no abstracts in English
Morimoto, Yasuyuki; Ikegami, Sohei; Sugitsue, Noritake
no journal, ,
no abstracts in English
Shimaike, Masamitsu; Takahashi, Nobuo; Morimoto, Yasuyuki; Ikegami, Sohei; Sugitsue, Noritake
no journal, ,
no abstracts in English
