Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Oka, Hiroshi*; Tanno, Takashi; Yano, Yasuhide; Otsuka, Satoshi; Kaito, Takeji; Hashimoto, Naoyuki*
Journal of Nuclear Materials, 572, p.154032_1 - 154032_8, 2022/12
Times Cited Count：3 Percentile：68.71(Materials Science, Multidisciplinary)9Cr oxide dispersion strengthened steels with slightly different nitrogen concentrations (0.0034 - 0.029 wt%) were prepared and their creep property at 973 K was investigated with microstructural characterization before and after the creep test. The creep strength decreased significantly as the nitrogen concentration increased. Microstructural observation revealed that, in the higher nitrogen concentration specimen, coarse Y-rich inclusions were found along the boundary between transformed ferrite region and residual ferrite region. The solubility difference of nitrogen in 
and 
phase would induce the localized increment of nitrogen concentration in the boundary region during the austenitizing process, resulting in the thermodynamic destabilization and subsequent coarsening of the dispersed oxide particles. The rows of creep voids were found near the rupture part of the crept specimen, suggesting that the coarse inclusions were the starting point of creep void formation and the subsequent premature fracture.
-iron investigated using in situ high-voltage electron microscopyAbe, Yosuke; Sato, Yuki*; Hashimoto, Naoyuki*
Philosophical Magazine, 102(12), p.1173 - 1193, 2022/00
Times Cited Count：2 Percentile：34.67(Materials Science, Multidisciplinary)We measured the growth rate of self-interstitial atom (SIA) clusters in electron-irradiated -iron at 275-320 K using in situ high-voltage electron microscopy. To improve the statistical accuracy of the measurement, we used photographic films and video data. This enabled analysis of a considerable amount of data by extracting several SIA clusters and tracking their size growth using image processing techniques. By fitting the temperature-dependent cluster growth rate to the Arrhenius relations derived using rate theory analysis, we obtained vacancy migration energy of 
eV. In addition, the effects of impurities leading to decrease in the cluster growth rate were briefly discussed.
-iron estimated by in situ observation of interstitial clusters at low temperatures using high-voltage electron microscopyAbe, Yosuke; Sato, Yuki*; Hashimoto, Naoyuki*
Philosophical Magazine, 101(14), p.1619 - 1631, 2021/07
Times Cited Count：2 Percentile：17.84(Materials Science, Multidisciplinary)Modeling cluster dynamics or rate theory to describe the microstructural evolution of irradiated materials requires a precise knowledge of the migration energy of a self-interstitial atom (SIA), a product of energetic particle radiation. We measured the evolution of the number density of SIA clusters in electron-irradiated -iron at low temperatures (110-320 K) by in situ observation using high-voltage electron microscopy. We identified temperature-dependent physical quantities, including (1) the peak density of SIA clusters and (2) the critical defect-free zone thickness in a thin foil specimen, associated with interstitial mobility. By fitting these quantities to the Arrhenius relations derived by rate theory analysis, we obtained estimated interstitial migration energy values of 
and 
eV for (1) and (2), respectively.
-ironAbe, Yosuke; Sato, Yuki*; Hashimoto, Naoyuki*; Onuki, Somei*
Philosophical Magazine, 100(1), p.110 - 125, 2020/00
Times Cited Count：7 Percentile：38.58(Materials Science, Multidisciplinary)We derive analytical models associated with the experimentally revealed one-dimensional (1D) migration mechanisms to examine the decreasing behavior of the cluster number density. The model calculation indicates that the detrapping of the stationary SIA clusters causes the surface annihilation of the liberated SIA clusters, leading to the decrease in their number density. The decreasing behavior is in closer accordance with the experimental data when setting the impurity concentration in the same order as the estimation from the previous in situ HVEM experiment. This result suggests that the trapping and detrapping of the SIA clusters are the possible underlying processes for the decreasing behavior.
Suzuki, Eriko; Takase, Gaku; Nakajima, Kunihisa; Nishioka, Shunichiro; Hashimoto, Naoyuki*; Isobe, Shigehito*; Osaka, Masahiko
Proceedings of International Topical Workshop on Fukushima Decommissioning Research (FDR 2019) (Internet), 4 Pages, 2019/05
In order to acquire the knowledge of the Cs chemisorption behaviour in the lower temperature region, the Cs chemisorbed compounds and the surface reaction rates were investigated by conducting the Cs chemisorption tests onto stainless steel at 873 and 973 K. As a result, The cesium ferrate compounds were revealed to be formed at this temperatures. It was seen that the dependences of surface reaction rate constant on this temperature were different from that at the higher temperature region. This behaviour leads to the conclusion that the Cs chemisorption model in the low temperature region should be newly constructed.
Sato, Yuki*; Abe, Yosuke; Abe, Hiroaki*; Matsukawa, Yoshitaka*; Kano, Sho*; Onuki, Somei*; Hashimoto, Naoyuki*
Philosophical Magazine, 96(21), p.2219 - 2242, 2016/06
Times Cited Count：12 Percentile：51.44(Materials Science, Multidisciplinary)We performed in situ observation of one-dimensional (1D) migration of self-interstitial atom (SIA) clusters in iron under electron irradiation at 110-300 K using high-voltage electron microscopy. Most 1D migration was stepwise positional changes of SIA clusters at irregular time intervals at all temperatures. The frequency of 1D migration did not depend on the irradiation temperature. It was directly proportional to the damage rate, suggesting that 1D migration was induced by electron irradiation. In contrast, the 1D migration distance depended on the temperature: distribution of the distance ranged over 100 nm above 250 K, decreased steeply between 250 and 150 K and was less than 20 nm below 150 K. The distance was independent of the damage rate at all temperatures. Next, we examined fluctuation in the interaction energy between an SIA cluster and vacancies of random distribution at concentrations 
-
, using molecular statics simulations. The fluctuation was found to trap SIA clusters of 4 nm diameter at vacancy concentrations higher than 
. We proposed that 1D migration was interrupted by impurity atoms at temperatures higher than 250 K, and by vacancies accumulated at high concentration under electron irradiation at low temperatures where vacancies are not thermally mobile.
Tanigawa, Hiroyasu; Sokolov, M. A.*; Sawahata, Atsushi*; Hashimoto, Naoyuki*; Ando, Masami; Shiba, Kiyoyuki; Enomoto, Masato*; Klueh, R. L.*
Journal of ASTM International (Internet), 6(5), 10 Pages, 2009/05
The master curve (MC) method works when the transition fracture toughness values follow the MC, and once the value is scaled properly, the MC is usually independent of the type of steel or the type of test specimen. This method is very much depending on the assumption that the fracture initiation points are homogeneously distributed and its initiation mechanism is independent on test temperature. The reduced-activation ferritic/martensitic steels (RAFs), such as F82H (Fe-8Cr-2W-0.2V-0.04Ta), has Al
O
Ta(V,Ti)O composite inclusions, or simple Ta(V)O inclusions, and shows inhomogeneous distribution, and it was revealed that that RAFs which contain Ta could initiate the facture in the different mechanism at lower temperature as the composite inclusions become fragile, and this should be considered when the toughness measured with small size toughness specimen which is usually tested at lower temperature.
Onuki, Somei*; Hashimoto, Naoyuki*; Ukai, Shigeharu*; Kimura, Akihiko*; Inoue, Masaki; Kaito, Takeji; Fujisawa, Toshiharu*; Okuda, Takanari*; Abe, Fujio*
Proceedings of 2009 International Congress on Advances in Nuclear Power Plants (ICAPP '09) (CD-ROM), p.9306_1 - 9306_5, 2009/05
For development of advanced ferritic ODS steels including high concentration of Cr and Al, the effect of minor alloying elements on fine dispersion of oxide particle was investigated. Microstructural analysis for Fe-16Cr-4Al-mYO-nZr or mHf due to TEM indicated that 0.3Zr or 0.6Hf are the optimum concentration. The mechanism of nano-sized oxide formation was also discussed.
Onuki, Somei*; Hashimoto, Naoyuki*; Ukai, Shigeharu*; Kimura, Akihiko*; Inoue, Masaki; Kaito, Takeji; Fujisawa, Toshiharu*; Okuda, Takanari*; Abe, Fujio*
Proceedings of 2009 International Congress on Advances in Nuclear Power Plants (ICAPP '09) (CD-ROM), p.9307_1 - 9307_4, 2009/05
The aim of this study is to survey microstructural properties and irradiation response of advanced high Cr and Al ODS steels. The effects of minor element addition and heat-treatment are also investigated. In these steels, black dots-like dislocation loops were formed around oxide particles during electron irradiation, and then the behavior depended on the type of additional elements, but the irradiation resistance was confirmed generally. The irradiation response was not sensitive as the heat-treatment, but the minor element addition (Zr and Hf) showed an intensive suppressing the loop growth. The results suggest that a large number of oxides enhanced the mutual recombination of the irradiation-induced point defects, especially at their surface.
CTanigawa, Hiroyasu; Klueh, R. L.*; Hashimoto, Naoyuki*; Sokolov, M. A.*
Journal of Nuclear Materials, 386-388, p.231 - 235, 2009/04
Times Cited Count：31 Percentile：87.96(Materials Science, Multidisciplinary)It has been reported that reduced-activation ferritic/martensitic steels (RAFMs) showed a variety of changes in ductile-brittle transition temperature and yield stress after irradiation at 573 K up to 5 dpa, and those differences could not be interpreted solely by the difference of dislocation microstructure induced by irradiation. To investigate the impact of other microstructural feature, i.e. precipitates, the precipitation behavior of F82H, ORNL 9Cr-2WVTa, and JLF-1 was examined. It was revealed that irradiation-induced precipitation and amorphization of precipitates partly occurred and caused the different precipitation on block, packet and prior austenitic grain boundaries. In addition to these phenomena, irradiation-induced nano-size precipitates were also observed in the matrix. It was also revealed that the chemical compositions of precipitates approached the calculated thermal equilibrium state of M
C
at an irradiation temperature of 573 K. Over all, these observations suggests that the variety of embrittlement and hardening of RAFMs observed at 573 K irradiation up to 5 dpa might be the consequence of the transition phenomena that occur as the microstructure approaches thermal equilibrium during irradiation at 573 K.
Tanigawa, Hiroyasu; Sakasegawa, Hideo; Hashimoto, Naoyuki*; Klueh, R. L.*; Ando, Masami; Sokolov, M. A.*
Journal of Nuclear Materials, 367-370(1), p.42 - 47, 2007/08
Times Cited Count：26 Percentile：84.1(Materials Science, Multidisciplinary)It was previously reported that reduced-activation ferritic/martensitic steels (RAFs), such as F82H-IEA and its heat treatment variant, ORNL9Cr-2WVTa, JLF-1 and 2%Ni-doped F82H, showed a variety of changes in ductile-brittle transition temperature (DBTT) and yield stress after irradiation at 573K up to 5dpa. These differences could not be interpreted solely as an effect of irradiation hardening caused by dislocation loop formation. To address these observations, the precipitation behavior of the irradiated steels was examined by weight analysis, X-ray diffraction analysis and chemical analysis on extraction residues. The results suggested that irradiation affects precipitation as if it was forced to reach the thermal equilibrium state at irradiation temperature 573K, which usually never be achieved by aging. The details of precipitates in the irradiated RAFs were examined to determine their impact on the mechanical properties, which obtained by tensile, Charpy impact, and bend bar toughness tests. Transmission electron microscopy was performed on thin films and extraction replica specimens to analyze the size distribution, chemical composition and crystal structure of precipitates. It turned out that the hardening level normalized by square root of average packet size showed a linear dependence on the increase of extracted precipitate weight. This dependence suggests that the difference in irradiation hardening between RAFs was caused by the different precipitation behavior on packet, block and prior austenitic grain boundaries during irradiation. The simple Hall-Petch law could be applicable to interpret this dependence. Detailed analytical results will be presented and their interpretation discussed.
Tanigawa, Hiroyasu; Hashimoto, Naoyuki*; Sakasegawa, Hideo*; Klueh, R. L.*; Sokolov, M. A.*; Shiba, Kiyoyuki; Jitsukawa, Shiro; Koyama, Akira*
Journal of Nuclear Materials, 329-333(1), p.283 - 288, 2004/08
Times Cited Count：19 Percentile：75.21(Materials Science, Multidisciplinary)Reduced-activation ferritic/martensitic steels (RAFs) were developed as candidate structural materials for fusion power plants. In a previous study, it was reported that ORNL9Cr-2WVTa and JLF-1 (Fe-9Cr-2W-V-Ta-N) steels showed smaller ductile-brittle transition temperature (DBTT) shifts compared to IEA modified F82H (Fe-8Cr-2W-V-Ta) after neutron irradiation up to 5 dpa at 573K. This difference in DBTT shift could not be interpreted as an effect of irradiation hardening, and it is also hard to be convinced that this difference was simply due to a Cr concentration difference. To clarify the mechanisms of the difference in Charpy impact property between these steels, various microstructure analyses were performed.
Tanigawa, Hiroyasu; Sakasegawa, Hideo*; Hashimoto, Naoyuki*; Zinkle, S. J.*; Klueh, R. L.*; Koyama, Akira*
Fusion Materials Semiannual Progress Report for the Period Ending (DOE/ER-0313/35), p.33 - 36, 2004/04
Extraction replica samples were prepared from F82H-IEA, F82H HT2, JLF-1 and ORNL9Cr to analyze the precipitate distribution. The samples were examined to obtain precipitate size distribution with TEM and to analyze chemical composition distribution with SEM. Back-scattered electron imaging was found to be the effective way to separate Ta-rich precipitate from other precipitates. Results showed that most of the precipitates were M23C6, and the shape is a round ellipsoid in F82H-IEA and HT2, but was a long ellipsoid in JFL-1 and ORNL9Cr. It was also found that MX precipitates were few and large and contain Ti in F82H-IEA and HT2, but a lot of fine MX precipitates without Ti were observed in JLF-1 and ORNL9Cr.
Tanigawa, Hiroyasu; Hashimoto, Naoyuki*; Sokolov, M. A.*; Klueh, R. L.*; Ando, Masami
Fusion Materials Semiannual Progress Report for the Period Ending (DOE/ER-0313/35), p.58 - 60, 2004/04
1TCT fracture toughness specimens of F82H-IEA steel were fatigue precracked and sliced in specimen thickness wise for microstructure analysis around the precrack. The microstructure around the precrack was observed by optical microscopy (OM), scanning electron microscopy (SEM), orientation imaging microscopy (OIM), and transmission electron microscopy (TEM). TEM samples around the crack front were prepared by focused ion beam (FIB) processor. The fracture surfaces of tested 1TCT specimens were also observed. OM observation showed that the precrack penetration was straight in the beginning, and then tended to follow a prior austenite grain boundary and to branch into 2 to 3 directions at the terminal. SEM and OIM observations revealed that the both microstructures around the precracks and ahead of the precrack had turned into cell structure, which is the typical microstructure of fatigue-loaded F82H. TEM images and inverse pole figures obtained from the crack-front region confirmed this structure change.
Wakai, Eiichi; Hashimoto, Naoyuki*; Robertson, J. P.*; Sawai, Tomotsugu; Hishinuma, Akimichi
Journal of Nuclear Materials, 307-311(Part.1), p.352 - 356, 2002/12
Times Cited Count：11 Percentile：58.11(Materials Science, Multidisciplinary)no abstracts in English
Wakai, Eiichi; Miwa, Yukio; Hashimoto, Naoyuki*; Robertson, J. P.*; Klueh, R. L.*; Shiba, Kiyoyuki; Abiko, Kenji*; Furuno, Shigemi*; Jitsukawa, Shiro
Journal of Nuclear Materials, 307-311(Part.1), p.203 - 211, 2002/12
Times Cited Count：26 Percentile：82.31(Materials Science, Multidisciplinary)no abstracts in English
CWakai, Eiichi; Hashimoto, N.*; J.P.Robertson*; Sawai, Tomotsugu; Hishinuma, Akimichi
Fusion Materials, 313(25), p.197 - 201, 1999/04
no abstracts in English
Fe isotopeWakai, Eiichi; Hashimoto, N.*; Shiba, Kiyoyuki; Miwa, Yukio; J.P.Robertson*; R.L.Klueh*
Fusion Materials, 313(25), p.151 - 160, 1999/04
no abstracts in English
B and F82H+
Ni steelsWakai, Eiichi; Hashimoto, N.*; Shiba, Kiyoyuki; Miwa, Yukio; J.P.Robertson*; R.L.Klueh*
Fusion Materials, 313(25), p.161 - 169, 1999/04
no abstracts in English
Sonoda, Katsumi*; Yamamoto, Yasushi*; Hashimoto, Osamu*; Ono, Toshio*; Tomita, Haruhiko*; Udagawa, Akira; Egusa, Shigenori; Sasuga, Tsuneo; Seguchi, Tadao; Tamura, Naoyuki
Japanese Journal of Applied Physics, Part 1, 28(10), p.1950 - 1956, 1989/10
Times Cited Count：0 Percentile：0.01(Physics, Applied)no abstracts in English
