Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kameyama, Yasuhiko; Watanabe, Shuji; Inoi, Hiroyuki; Shimizu, Yasunori; Aragaki, Etsushi; Shinozaki, Masayuki; Ota, Yukimaru
JAEA-Testing 2008-001, 63 Pages, 2008/03
JAEA-Testing-2008-001.pdf:20.97MB
The High Temperature Engineering Test Reactor (HTTR) has the Auxiliary Component Cooling Water System (ACCWS) and the General Cooling Water System (GCWS). ACCWS supplies the cooling water to the many facilities those are necessary to operate and cool the reactor. GCWS supplies the cooling water to the many facilities those are necessary to operate and cool the reactor in normal circumstances. Two kinds of the cooling water are cooled with the Cooling Tower. Each facility has the circulation pump, the cooling tower, the piping, the valve, the strainer and the injection system of the chemical solution. And these two facilities are operating all the year. This report describes maintenance items, improvements and management of the ACCWS and the GCWS.
Tochio, Daisuke; Kameyama, Yasuhiko; Shimizu, Atsushi; Inoi, Hiroyuki; Yamazaki, Kazunori; Shimizu, Yasunori; Aragaki, Etsushi; Ota, Yukimaru; Fujimoto, Nozomu
JAEA-Technology 2006-045, 43 Pages, 2006/09
JAEA-Technology-2006-045.pdf:5.97MB
The auxiliary component cooling water system (ACCWS) is one of the cooling system in High Temperature Engineering Test Reactor (HTTR) The ACCWS has the features not only many facilities cooling but also heat sink of the vessel cooling system which is one of the engineering safety features. Therefore, the ACCWS is required to satisfy the design criteria of heat removal performance. In this report, heat exchange performance data of the rise-to-power-up test and the in-service operation for the ACCWS cooling tower was evaluated. Moreover, the evaluated values were compared with the design values, and it is confirmed that ACCWS cooling tower has the required heat exchange performance in the design.
Kamada, Yutaka; Fujita, Takaaki; Ishida, Shinichi; Kikuchi, Mitsuru; Ide, Shunsuke; Takizuka, Tomonori; Shirai, Hiroshi; Koide, Yoshihiko; Fukuda, Takeshi; Hosogane, Nobuyuki; et al.
Fusion Science and Technology (JT-60 Special Issue), 42(2-3), p.185 - 254, 2002/09
Times Cited Count：34 Percentile：48.48(Nuclear Science & Technology)With the main aim of providing physics basis for ITER and the steady-state tokamak reactors, JT-60/JT-60U has been developing and optimizing the operational concepts, and extending the discharge regimes toward sustainment of high integrated performance in the reactor relevant parameter regime. In addition to achievement of the equivalent break-even condition (QDTeq up to 1.25) and a high fusion triple product = 1.5E21 m-3skeV, JT-60U has demonstrated the integrated performance of high confinement, high beta-N, full non-inductive current drive with a large fraction of bootstrap current in the reversed magnetic shear and in the high-beta-p ELMy H mode plasmas characterized by both internal and edge transport barriers. The key factors in optimizing these plasmas are profile and shape controls. As represented by discovery of various Internal Transport Barriers, JT-60/JT-60U has been emphasizing freedom and restriction of profiles in various confinement modes. JT-60U has demonstrated applicability of these high confinement modes to ITER and also clarified remaining issues.
Higashijima, Satoru*; Sugie, Tatsuo; Kubo, Hirotaka; Tsuji, Shunji; Shimada, Michiya; Asakura, Nobuyuki; Hosogane, Nobuyuki; Kawano, Yasunori; Nakamura, Hiroo; Itami, Kiyoshi; et al.
Journal of Nuclear Materials, 220-222, p.375 - 379, 1995/00
Times Cited Count：32 Percentile：92.8(Materials Science, Multidisciplinary)no abstracts in English
