Mechanical properties of full austenitic welding joint at cryogenic temperature for the ITER toroidal field coil structure

Iguchi, Masahide; Saito, Toru; Kawano, Katsumi; Chida, Yutaka; Nakajima, Hideo; Ogawa, Tsuyoshi*; Katayama, Yoshinori*; Ogata, Hiroshige*; Minemura, Toshiyuki*; Tokai, Daisuke*; et al.

Fusion Engineering and Design, 88(9-10), p.2520 - 2524, 2013/10

https://doi.org/10.1016/j.fusengdes.2013.02.165

ITER TFC structures are large welding structures made of heavy thick stainless steels. JAEA plans to apply narrow gap TIG welding with FMYJJ1 which is full austenitic stainless filler material to manufacture TFC structure. FMYJJ1 is specified in "Codes for Fusion Facilities -Rules on Superconducting Magnet Structure (2008)". In order to evaluate effect of base material combinations and thickness of welded joint on tensile properties at 4 K, tensile tests were conducted at 4 K by using tensile specimens taken from 40 mm thickness weld joints of four combinations and 200 mm thickness ones of two combinations of base materials. These weld joints were manufactured by one side narrow gap TIG welding with FMYJJ1. As the results, it was confirmed that yield and tensile strengths of welded joint at 4K were decreased with decreasing of nitrogen of base material, and there were no large distribution of strengths at 4 K along the thickness of welded joints of 200 mm thickness.