Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Iwamoto, Osamu; Iwamoto, Nobuyuki; Kunieda, Satoshi; Minato, Futoshi; Nakayama, Shinsuke; Kimura, Atsushi; Nakamura, Shoji; Endo, Shunsuke; Nagaya, Yasunobu; Tada, Kenichi; et al.
EPJ Web of Conferences, 284, p.14001_1 - 14001_7, 2023/05
Times Cited Count：0 Percentile：0.21(Nuclear Science & Technology)Tada, Kenichi; Nagaya, Yasunobu; Taninaka, Hiroshi; Yokoyama, Kenji; Okita, Shoichiro; Oizumi, Akito; Fukushima, Masahiro; Nakayama, Shinsuke
Journal of Nuclear Science and Technology, 21 Pages, 2023/04
Times Cited Count：6 Percentile：98.92(Nuclear Science & Technology)The new version of the Japanese evaluated nuclear data library, JENDL-5, was released in December 2021. This paper demonstrates the validation of JENDL-5 for fission reactor applications. Benchmark calculations are performed with the continuous-energy Monte Carlo codes MVP and MCNP and the deterministic code system MARBLE. The benchmark calculation results indicate that the performance of JENDL-5 for fission reactor applications is better than that of the former library JENDL-4.0.
Iwamoto, Osamu; Iwamoto, Nobuyuki; Kunieda, Satoshi; Minato, Futoshi; Nakayama, Shinsuke; Abe, Yutaka*; Tsubakihara, Kosuke*; Okumura, Shin*; Ishizuka, Chikako*; Yoshida, Tadashi*; et al.
Journal of Nuclear Science and Technology, 60(1), p.1 - 60, 2023/01
Times Cited Count：64 Percentile：99.99(Nuclear Science & Technology)Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.
Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07
This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.
Yokoyama, Kenji; Taninaka, Hiroshi
Kaku Deta Nyusu (Internet), (132), p.25 - 33, 2022/06
This article explains the results of integral test of JENDL-5 by benchmark analysis in fast reactor system, which were presented in a special session of the 2022 Spring Annual Meeting of the Atomic Energy Society of Japan (AESJ). The latest version of Japanese evaluated nuclear data library, JENDL-5, was released in December 2021. In order to confirm the applicability of JENDL-5 to the fast reactor system, we conducted a set of benchmark analysis using the integral experiment data included in the fast reactor nuclear design database which is being developed by JAEA. With respect to major nuclear characteristics in the standard fast reactor system, it was confirmed that the ratios of analysis result and experimental result (C/E values) based on JENDL-5 were almost the same as those of JENDL-4.0. In the special session, the results of sensitivity analysis were reported. Since the results have been described in the proceedings of the AESJ meeting, we add the results of the versions under development of JENDL-5 and discuss their relationship with the reported results of sensitivity analysis.
Yokoyama, Kenji; Maruyama, Shuhei; Taninaka, Hiroshi; Oki, Shigeo
JAEA-Data/Code 2021-019, 115 Pages, 2022/03
JAEA-Data-Code-2021-019.pdf:6.21MB
JAEA-Data-Code-2021-019-appendix(CD-ROM).zip:435.94MB
In JAEA, several versions of unified cross-section set for fast reactors have been developed so far; we have developed a new unified cross-section set ADJ2017R, which is an improved version of the unified cross-section setADJ2017 for fast reactors. The unified cross-section set is used for reflecting information of C/E values (analysis / experiment values) obtained by integral experiment analyses in reactor core design via the cross-section adjustment methodology; the values are stored in the standard database for FBR core design. In the methodology, the cross-section set is adjusted by integrating the information such as uncertainty (covariance) of nuclear data, uncertainty of integral experiment / analysis, sensitivity of integral experiment with respect to nuclear data. ADJ2017R basically has the same performance as ADJ2017, but we conducted an additional investigation on ADJ2017 and revised the following two points. The first is to unify the evaluation method of the correlation coefficient of uncertainty caused by experiments (hereinafter referred to as the experimental correlation coefficient). Because it was found that the common uncertainty used in the evaluation of the experimental correlation coefficient was evaluated by two different methods, the experimental correlation coefficients were revised for all experimental data, and the evaluation method was unified. The second is the review of the integral experiment data used for the cross-section adjustment calculation. It was found that one of the experimental values of composition ratio after irradiation of the Am-243 sample has a problem in uncertainty evaluation because its experimental uncertainty is extremely small compared to the others. The cross-section adjustment calculation was, therefore, redone by excluding the experimental value. In the creation of ADJ2017, a total of 719 data sets were analyzed and evaluated, and eventually adopted 620 integral experimental data sets. In contrast, a total of 61
Usami, Shin; Kishimoto, Yasufumi*; Taninaka, Hiroshi; Maeda, Shigetaka
JAEA-Technology 2018-003, 97 Pages, 2018/07
JAEA-Technology-2018-003.pdf:12.54MB
The decay heat used for effectiveness evaluation of the prevention measures against severe accidents in the prototype fast breeder reactor Monju was evaluated by applying the updated nuclear data libraries based on JENDL-4.0, reflecting the realistic core operation pattern, and setting the rational extent of uncertainty. The decay heats of fission products, the actinide nuclides such as Cm-242, and radioactive structural materials were calculated by FPGS code. The decay heat of U-239 and Np-239 was evaluated based on ANSI/ANS-5.1-1994. The calculation uncertainty of each decay heat was evaluated based on summation of uncertainty factors, C/E values of reaction rates obtained in Monju system startup test, and so on. Furthermore, the decay heat evaluation method based on the FPGS90 was verified by the comparison of the results of the decay heat measurement of the two spent MOX fuel subassemblies in the experimental fast reactor Joyo MK-II core.
Taninaka, Hiroshi; Takegoshi, Atsushi; Kishimoto, Yasufumi*; Mori, Tetsuya; Usami, Shin
Progress in Nuclear Energy, 101(Part C), p.329 - 337, 2017/11
Times Cited Count：2 Percentile：19.65(Nuclear Science & Technology)The present paper describes the evaluation of the power reactivity loss data obtained in the Japanese prototype fast breeder reactor Monju. The most recent analysis on the power reactivity loss measurement (Takano, et al., 2008) is updated considering the following findings: (a) in-core temperature distribution effect, (b) crystalline binding effect, (c) logarithmic averaging of the fuel temperature, (d) localized fuel thermal elongation effect, (e) updated Japanese Evaluated Nuclear Data Library, JENDL-4.0, and (f) refined corrections on the measured value. The influences of the updates are quantitatively identified and the most precise and probable C/E value is derived together with a thorough uncertainty evaluation. As a result, it is revealed that the analysis overestimates the measurement by 4.6% for the measurement uncertainty of 2.0%. The discrepancy is reduced to as small as 1.1% when the core bowing effect is considered, which implies the importance of the core bowing effect in the calculation of the power reactivity loss.
Usami, Shin; Kishimoto, Yasufumi; Taninaka, Hiroshi; Maeda, Shigetaka
Proceedings of International Conference on the Physics of Reactors; Unifying Theory and Experiments in the 21st Century (PHYSOR 2016) (USB Flash Drive), p.3263 - 3274, 2016/05
The present paper describes the validation of the new decay heat evaluation method using FPGS90 code with both the updated nuclear data library and the rational extent of uncertainty, by comparing the results of the decay heat measurement of the spent fuel subassemblies in Joyo MK-II core and by comparing with the calculation results of ORIGEN2.2 code. The calculated values of decay heat (C) by FPGS90 based on the JENDL-4.0 library were coincident with the measured ones (E) within the calculation uncertainties, and the C/E ranged from 1.01 to 0.93. FPGS90 evaluated the decay heat almost 3% larger than ORIGEN2.2, and it improved the C/E in comparison with the ORIGEN2.2 code. Furthermore, The C/E by FPGS90 based on the JENDL-4.0 library was improved than that based on the JENDL-3.2 library, and the contribution of the revision of reaction cross section library to the improvement was dominant rather than that of the decay data and fission yield data libraries.
Taninaka, Hiroshi; Kishimoto, Yasufumi; Mori, Tetsuya; Usami, Shin
Proceedings of International Conference on the Physics of Reactors; Unifying Theory and Experiments in the 21st Century (PHYSOR 2016) (USB Flash Drive), p.2610 - 2621, 2016/05
Reactivity loss due to power ascension (power reactivity loss or power coefficient of reactivity) is thus an important design parameter for determining the number of CRs and plutonium content or inventory in the SFR core design, along with the burnup reactivity loss. Measurements on these reactivity losses were therefore performed during the system startup tests in the Japanese prototype SFR Monju in 1995 and analyses have been carried out for several times. The most recent analysis on the power coefficient measurement in Monju was presented by Takano (Takano, et al., 2008). The following latest findings, which have not been taken into account in the past analyses, are available at present and may affect the existing results: (a) in-core temperature distribution effect, (b) crystalline binding effect, (c) logarithmic averaging of the fuel temperature, (d) localized fuel thermal elongation effect, (e) updated Japanese Evaluated Nuclear Data Library, JENDL-4.0, and (f) refined corrections on the measured value. The influences of refining the calculational models and measured value corrections were therefore quantitatively identified in this study by considering all of these new findings. As a result, it was revealed that the analysis overestimates the experiment by 8.1% for the total uncertainty of 5.9%. Therefore, an additional effect, that is the core bowing effect, was considered in the calculation, and the discrepancy was reduced to 2.9%. The possibility of a significant contribution from the core bowing or deformation effect was thus suggested.
Nakazato, Wataru*; Taninaka, Hiroshi
Nihon Genshiryoku Gakkai-Shi ATOMO
, 54(1), p.68 - 69, 2012/01
no abstracts in English
Izumi, Keisuke*; Iguchi, Masayuki*; Kawasaki, Masaji*; Okawa, Yoshinao*; Oka, Kiyoshi; Yamagata, Ryohei; Koyanaka, Akihiro*
no journal, ,
At penetration parts in radiation controlled areas, such as walls and floors where cables go through, the high-airtight performance is required in order to control the negative pressure of air-conditioning. Moreover, since the cables get deteriorated by radiation, the easy replacement works are indispensable. However, the materials in general use have neither resistance, nor any sheltering performance against radiation. In this research, we have developed radiation-proof materials, to meet both an airtight and a sheltering performance.
Kitano, Akihiro; Taninaka, Hiroshi
no journal, ,
no abstracts in English
Nishimura, Masahiro; Yoshimura, Kazuo; Taninaka, Hiroshi; Yamada, Fumiaki; Mori, Takero; Nishino, Hiroyuki; Fukano, Yoshitaka
no journal, ,
no abstracts in English
Mori, Takero; Taninaka, Hiroshi; Kurisaka, Kenichi; Yamada, Fumiaki; Nishimura, Masahiro; Fukano, Yoshitaka
no journal, ,
no abstracts in English
Taninaka, Hiroshi; Yokoyama, Kenji; Oki, Shigeo
no journal, ,
no abstracts in English
Yokoyama, Kenji; Taninaka, Hiroshi
no journal, ,
The latest version of Japanese evaluated nuclear data library, JENDL-5, was released in December 2021. In order to confirm the applicability of JENDL-5 to the fast reactor system, we conducted a set of benchmark analysis using the integral experiment data included in the fast reactor nuclear design database which is being developed by JAEA. With respect to major nuclear characteristics in the standard fast reactor system, it was confirmed that the ratios of analysis result and experimental result (C/E values) based on JENDL-5 were almost the same as those of JENDL-4.0. However, sensitivity analysis revealed that nuclide-and-reaction-wise contributions were canceled out. On the other hand, it was confirmed that C/E values in some of nuclear characteristics related to minor actinides were significantly improved compared to JENDL-4.0. Sensitivity analysis revealed that revisions to the fission cross sections of Pu-242 and Cm-244 and revisions to the capture cross sections of Cm-245 and Cm-246 improved the results.
