Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Asano, Norikazu; Nishimura, Arashi; Takabe, Yugo; Araki, Daisuke; Yanai, Tomohiro; Ebisawa, Hiroyuki; Ogasawara, Yasushi; Oto, Tsutomu; Otsuka, Kaoru; Otsuka, Noriaki; et al.
JAEA-Technology 2021-045, 137 Pages, 2022/06
JAEA-Technology-2021-045.pdf:2.97MB
A collapse event of a cooling tower for secondary cooling system in the Japan Materials Testing Reactor (JMTR) was caused by the strong winds of Typhoon No.15 on September 9, 2019. As measures against the event, the working group for the renewal of the UCL (Utility Cooling Loop) cooling tower was established in the department of JMTR, and the integrity of the UCL cooling tower, which is the same type of wooden cooling tower as the secondary cooling tower in the JMTR, was investigated. As a result of this investigation, we have decided to replace the existing UCL cooling tower with a new cooling system. After investigations, in order to reduce the risk of collapse due to wood decay, the new cooling system was installed as a component of the air system to be managed as a performance maintenance facility after decommissioning. This report describes the design of and the evaluation results of the facility.
Eguchi, Shohei; Shibata, Hiroshi; Imaizumi, Tomomi; Nagata, Hiroshi; Tanimoto, Masataka; Kusunoki, Tsuyoshi
JAEA-Review 2017-032, 26 Pages, 2018/02
JAEA-Review-2017-032.pdf:2.44MB
A practical training course using the JMTR and other research infrastructures was held from July 24th to August 4th in 2017 for Asian young researchers and engineers. This course was adopted as Japan-Asia Youth Exchange Program in Science (SAKURA Exchange Program in Science) which is the project of the Japan Science and Technology Agency, and this course aims to enlarge the number of high-level nuclear researchers/engineers in Asian countries which are planning to introduce a nuclear power plant, and to promote the use of facilities in future. In this year, 10 young researchers and engineers joined the course from 6 countries. This course consists of lectures, which are related to irradiation test research, safety management of nuclear reactors, nuclear characteristics of the nuclear reactors, etc., practical training such as practice of research reactor operation using simulator and technical tour of nuclear facilities on nuclear energy. The content of this course in FY 2017 is reported in this paper.
Eguchi, Shohei; Takemoto, Noriyuki; Shibata, Hiroshi; Tanimoto, Masataka; Kusunoki, Tsuyoshi
JAEA-Review 2017-007, 32 Pages, 2017/03
JAEA-Review-2017-007.pdf:3.19MB
A practical training course using the JMTR and other research infrastructures was held from July 25th to August 5th in 2016 for domestic and foreign young researchers and engineers. This course aims to enlarge the number of high-level nuclear researchers/engineers in Japan and foreign countries which are planning to introduce a nuclear power plant, and to promote the use of facilities in future. In this year, 13 young researchers and engineers joined the course from 7 countries. This course consists of lectures, which are related to irradiation test research, safety management of nuclear reactors, nuclear characteristics of the nuclear reactors, etc., practical training and technical tour of nuclear facilities on nuclear energy. At the end of the course, the trainees discussed the energy policy and prospect of each country, each country's research reactor, and trainee's current research. The content of this course in FY 2016 is reported in this paper.
Eguchi, Shohei; Takemoto, Noriyuki; Shibata, Hiroshi; Naka, Michihiro; Nakamura, Jinichi; Tanimoto, Masataka; Ito, Haruhiko*
JAEA-Review 2016-001, 31 Pages, 2016/05
JAEA-Review-2016-001.pdf:9.05MB
Since fiscal 2011, a practical training course using the JMTR and other research infrastructures has been provided by Neutron Irradiation Testing Reactor Center for foreign young researchers and engineers in Asian and other countries which are planning to introduce power reactors. The aim of this course is to contribute to the human resource development in nuclear research field and to increase the future use the JMTR. On the other hand, a training course for Japanese young researchers and engineers has been conducted since fiscal 2010. These two separate courses were integrated. In fiscal 2015, this training course was conducted for 2 weeks and 17 young researchers and engineers from 7 countries were participated. They studied about the general outline of nuclear research, current status and R&D about nuclear energy, safety management of nuclear reactor, irradiation behavior of materials and fuels, facilities and technologies for irradiation and post irradiation, and nuclear characteristics of the reactor through lectures and practical trainings. At the end of the course, we had a discussion about the current status and future of energy mix and renewable energies of each country was discussed. The content of this training course in fiscal 2015 is reported in this paper.
Eguchi, Shohei; Koike, Sumio; Takemoto, Noriyuki; Tanimoto, Masataka; Kusunoki, Tsuyoshi
UTNL-R-0492, p.9_1 - 9_8, 2016/03
no abstracts in English
Eguchi, Shohei; Takemoto, Noriyuki; Tanimoto, Masataka; Kubo, Ayako; Ishitsuka, Etsuo; Nakamura, Jinichi; Ito, Haruhiko
JAEA-Review 2015-005, 38 Pages, 2015/06
JAEA-Review-2015-005.pdf:15.06MB
Since fiscal 2011, a practical training course using the JMTR and other research infrastructures has been provided by Neutron Irradiation Testing Reactor Center for foreign young researchers and engineers in Asian and other countries which are planning to introduce power reactors. The aim of this course is to contribute to the human resource development in nuclear research field and to increase the future use the JMTR. On the other hand, a training course for Japanese young researchers and engineers has been conducted since fiscal 2010. In fiscal 2014, these two separate courses were integrated into one and it was conducted for 3 weeks for young researchers and engineers at home as well as abroad. Nineteen persons from seven countries participated and they studied about the general outline of nuclear research, current status and R&D of nuclear energy, irradiation test facilities and technologies, nuclear characteristics of the reactor and safety and operation management of nuclear reactors. At the end of the course, we had an active discussion about the current status and future of energy mix. The content of this training course in fiscal 2014 are reported in this paper.
Otsuka, Noriaki; Takeuchi, Tomoaki; Yamamoto, Keiichi; Shibata, Akira; Kimura, Nobuaki; Takemoto, Noriyuki; Tanimoto, Masataka; Tsuchiya, Kunihiko; Sano, Tadafumi*; Unesaki, Hironobu*; et al.
KURRI Progress Report 2013, P. 215, 2014/10
Investigation of a relation between reactor power and brightness of Cherenkov light at Kyoto University Research reactor (KUR) by a CCD camera was performed due to a development of a real-time in-core measurement technique using Cherenkov light. Analyzing the brightness value of individual RGB color component at each pixel, some of the G and B brightness values reached the maximum value of 8-bit binary number, i.e. 255, above about 2-3 MW. Therefore, we corrected the G and B brightness values by the R signals whose brightness value did not saturate even at 5 MW, the maximum reactor power of KUR. Then, the total brightness value was in proportion to the reactor power after the correction. These results indicate the reactor power can be estimated by the observation of Cherenkov light.
Kimura, Nobuaki; Takeuchi, Tomoaki; Shibata, Akira; Takemoto, Noriyuki; Kimura, Akihiro; Naka, Michihiro; Nishikata, Kaori; Tanimoto, Masataka; Tsuchiya, Kunihiko; Sano, Tadafumi*; et al.
KURRI Progress Report 2012, P. 209, 2013/10
In research reactors, CCD cameras are used to observe reactor core for reactor operation management, e.g. to prevent debris from falling. In order to measure the reactor power and fuel burnup exactly by means of observation of Cherenkov light, the development of the on-line measurement device started in 2009. In this study, the wavelength and the absolute irradiance of the Cherenkov light were measured by a spectrometer, and the Cherenkov light was observed by the CCD camera. As a result, the measurement value is good agreement with the nominal value. On the other hand, the value by the visible imaging system was obtained the same tendency of nominal transmittance value of ND-filters.
Watahiki, Shunsuke; Hanakawa, Hiroki; Imaizumi, Tomomi; Nagata, Hiroshi; Ide, Hiroshi; Komukai, Bunsaku; Kimura, Nobuaki; Miyauchi, Masaru; Ito, Masayasu; Nishikata, Kaori; et al.
JAEA-Technology 2013-021, 43 Pages, 2013/07
JAEA-Technology-2013-021.pdf:5.12MB
The number of research reactors in the world is decreasing because of their aging. On the other hand, the necessity of research reactor, which is used for human resources development, progress of the science and technology, industrial use and safety research is increasing for the countries which are planning to introduce the nuclear power plants. From above background, the Neutron Irradiation and Testing Reactor Center began to discuss a basic concept of Multipurpose Compact Research Reactor (MCRR) for education and training, etc., on 2010 to 2012. This activity is also expected to contribute to design tool improvement and human resource development in the center. In 2011, design study of reactor core, irradiation facilities with high versatility and practicality, and hot laboratory equipment for the production of Mo-99 was carried out. As the result of design study of reactor core, subcriticality and operation time of the reactor in consideration of an irradiation capsule, and about the transient response of the reactor to the reactivity disturbance during automatic control operation, it was possible to do automatic operation of MCRR, was confirmed. As the result of design study of irradiation facilities, it was confirmed that the implementation of an efficient mass production radioisotope Mo-99 can be expected. As the result of design study with hot laboratory facilities, Mo-99 production, RI export devised considered cell and facilities for exporting the specimens quickly was designed.
Park, C.; Tanimoto, Masataka; Imaizumi, Tomomi; Miyauchi, Masaru; Ito, Masayasu; Kaminaga, Masanori
JAEA-Technology 2012-039, 87 Pages, 2013/01
JAEA-Technology-2012-039.pdf:3.55MB
Preliminary accident analysis has been carried out for a LOFA (Loss of Flow Accident) and RIAs (Reactivity Insertion Accidents) of the conceptual 10 MW MRR (multi-purpose research reactor) under design study by using the RELAP5/MOD3 code in order to provide the preliminary evaluation of safety margin as well as the intuitions to the design of the MRR. Input and modeling for the RELAP5/MOD3 simulations have also been described. The analysis results indicate that the concept of the MRR is feasible with practical safety margins. The same events have been also analyzed by using the PARET/ANL and the EUREKA-2/RR codes to compare the codes suitability, which have been widely used for the analysis of research reactors. Same geometric and modeling data used for the RELAP5/MOD3 have been used as long as they correspond to each code's input requirements. The three codes show the same or similar overall trends for the events analyzed, but show a small difference in a specific condition.
Shibata, Akira; Kimura, Nobuaki; Tanimoto, Masataka; Nakamura, Jinichi; Saito, Takashi; Tsuchiya, Kunihiko
JAEA-Conf 2012-002, p.56 - 60, 2012/12
To improve the quality of irradiation tests data and to increase the reliability of safety management system of reactors including both MTR and LWR, development of new instrumentation is key issue. JAEA is developing several in-pile instrumentations to conduct irradiation tests at JMTR. Here we introduce three new instrumentations. These are ECP sensor, new water level indicator and in-reactor observation system using Cherenkov light.
Kimura, Nobuaki; Takemoto, Noriyuki; Nagata, Hiroshi; Kimura, Akihiro; Naka, Michihiro; Nishikata, Kaori; Tanimoto, Masataka; Tsuchiya, Kunihiko; Sano, Tadafumi*; Unesaki, Hironobu*; et al.
KURRI Progress Report 2011, P. 219, 2012/10
In research reactors, a CCD camera is used to observe reactor core for reactor operation management, e.g. to prevent debris falling. In order to measure the reactor power and fuel burnup exactly by means of observation of Cherenkov light and 
ray information, the development of the on-line measurement device has been started since 2009. In this study, as a part of development of in-reactor surveillance, wavelength and absolute irradiance of Cherenkov light were measured by spectroscopy, and Cherenkov light was observed by the CCD camera. The neutral density filters (ND-filters) were used to investigate the transmittance of Cherenkov light in these measurements.
Kimura, Nobuaki; Imaizumi, Tomomi; Takemoto, Noriyuki; Tanimoto, Masataka; Saito, Takashi; Hori, Naohiko; Tsuchiya, Kunihiko; Romanova, N. K.*; Gizatulin, S.*; Martyushov, A.*; et al.
JAEA-Technology 2012-012, 34 Pages, 2012/06
JAEA-Technology-2012-012.pdf:12.91MB
Si semiconductor production by Neutron Transmutation Doping (NTD) method using the Japan Materials Testing Reactor (JMTR) has been investigated in Neutron Irradiation and Testing Reactor Center, Japan Atomic Energy Agency (JAEA) in order to expand industry use. As a part of investigations, irradiation test of silicon ingot for development of NTD-Si with high quality was planned using WWR-K in Institute of Nuclear Physics (INP), National Nuclear Center of Republic of Kazakhstan (NNC-RK) based on one of specific topics of cooperation (STC), Irradiation Technology for NTD-Si (STC No.II-4), on the implementing arrangement between NNC-RK and the JAEA for "Nuclear Technology on Testing/Research Reactors" in cooperation in research and development in nuclear energy and technology. As for the irradiation test, Si rotating device was fabricated in JAEA, and the fabricated device was transported with irradiation specimens from JAEA to INP-NNC-RK. This report described the design, the fabrication, the performance test of the Si rotating device and transportation procedures.
Tanimoto, Masataka; Tsuchiya, Kunihiko
Enerugi Rebyu, 32(5), p.7 - 10, 2012/05
Tc is most commonly used as a radiopharmaceutical in the field of nuclear medicine, accounting for more than 80% of all diagnostic nuclear medicine procedure. The Tc is obtained from 
Mo, which is produced by fission of 
U ((n, f) method) and the neutron capture (n,) method using the 
Mo target. Recently, worldwide demand of Mo became rises. However the availability and supply of Mo for the manufacturing of generators has been a matter of concern. Concern arose from several factors including, such as the shutdown of some nuclear reactors at Canada (NRU, etc.) and Air traffic obstacles, uncertainty of reliable operating condition for radioisotope production in the majority of the foreign production facilities. This report provides descriptions for the detail technical aspects related to a Mo production by (n,) method in JMTR.
Shibata, Akira; Ito, Masayasu; Takemoto, Noriyuki; Nakatsuka, Masafumi*; Ohara, Hiroshi*; Kodama, Mitsuhiro*; Tanimoto, Masataka; Tsuchiya, Kunihiko
JAEA-Technology 2011-034, 67 Pages, 2012/02
JAEA-Technology-2011-034.pdf:6.94MB
Reflector elements made from metal beryllium is widely used as neutron reflectors to increase neutron flux in test reactors. When beryllium reflector elements are irradiated by neutron, bending of reflector elements caused by swelling occurs, and beryllium reflector elements must be replaced in several years. In this report, investigation for non-destructive inspection method of metal Beryllium and experiments for Preliminary inspection to establish post irradiation examination method for research of characteristics of metal beryllium under neutron irradiation were reported.
Kawamura, Hiroshi; Chakrov, P.*; Tsuchiya, Kunihiko; Gizatulin, S.*; Takemoto, Noriyuki; Chakrova, Y.*; Kimura, Akihiro; Ludmila, C.*; Tanimoto, Masataka; Asset, S.*; et al.
JAEA-Review 2011-042, 46 Pages, 2012/02
JAEA-Review-2011-042.pdf:2.69MB
Based on the implementing agreement between National Nuclear Center of the Republic of Kazakhstan (NNC) and the Japan Atomic Energy Agency (JAEA) for the Nuclear Technology on Testing/Research Reactors in the cooperation in Nuclear Energy Research and Development in Nuclear Energy and Technology, four specific topics of cooperation (STC) have been carried out from June, 2009. Four STCs are as follows; (1) STC No.II-1: International Standard of Instrumentation, (2) STC No.II-2: Irradiation Technology of RI Production, (3) STC No.II-3: Lifetime Expansion of Beryllium Reflector, (4) STC No.II-4: Irradiation Technology for NTD-Si. The information exchange, personal exchange and cooperation experiments are carried out under these STCs. The status in the field of nuclear technology on testing/research reactors in the implementing arrangement is summarized, and future plans of these specific topics of cooperation are described in this report.
Imaizumi, Tomomi; Miyauchi, Masaru; Ito, Masayasu; Watahiki, Shunsuke; Nagata, Hiroshi; Hanakawa, Hiroki; Naka, Michihiro; Kawamata, Kazuo; Yamaura, Takayuki; Ide, Hiroshi; et al.
JAEA-Technology 2011-031, 123 Pages, 2012/01
JAEA-Technology-2011-031.pdf:16.08MB
The number of research reactors in the world is decreasing because of their aging. However, the planning to introduce the nuclear power plants is increasing in Asian countries. In these Asian countries, the key issue is the human resource development for operation and management of nuclear power plants after constructed them, and also the necessity of research reactor, which is used for lifetime extension of LWRs, progress of the science and technology, expansion of industry use, human resources training and so on, is increasing. From above backgrounds, the Neutron Irradiation and Testing Reactor Center began to discuss basic concept of a multipurpose low-power research reactor for education and training, etc. This design study is expected to contribute not only to design tool improvement and human resources development in the Neutron Irradiation and Testing Reactor Center but also to maintain and upgrade the technology on research reactors in nuclear power-related companies. This report treats the activities of the working group from July 2010 to June 2011 on the multipurpose low-power research reactor in the Neutron Irradiation and Testing Reactor Center and nuclear power-related companies.
Ishida, Takuya; Tanimoto, Masataka; Shibata, Akira; Kitagishi, Shigeru; Saito, Takashi; Omi, Masao; Nakamura, Jinichi; Tsuchiya, Kunihiko
JAEA-Testing 2011-001, 44 Pages, 2011/06
JAEA-Testing-2011-001.pdf:4.52MB
The Neutron Irradiation and Testing Reactor Center has developed new irradiation technologies to provide irradiation data with high technical value for the refurbishment and resume of the Japan Materials Testing Reactor (JMTR). For the purpose to perform assembling of capsules, materials tests, materials inspection and analysis of irradiation specimens for the development of irradiation capsules, improvement and maintenance of facilities were performed. The RI application development building was refurbished and maintained for above-mentioned purpose. After refurbishment, the building was named Irradiation Technology Development Building. It contains eight laboratories based on the purpose of use, and experimental apparatuses were installed. This report describes the refurbishment work of the RI application development building, the installation work and operation method of the experimental apparatuses and the basic management procedure of the Irradiation Technology Development Building.
Kimura, Akihiro; Tanimoto, Masataka; Ishida, Takuya; Tsuchiya, Kunihiko; Hasegawa, Yoshio*; Hishinuma, Yukio*; Suzuki, Masashi*
JAEA-Technology 2011-012, 17 Pages, 2011/06
JAEA-Technology-2011-012.pdf:1.72MBJP, 2010-263801 Patent publication (In Japanese)
PZC (Poly-Zirconium Compound) was developed as adsorbent of molybdenum for Mo-
Tc generator. However, PZC has some faults. So, new adsorbent based on titanium (PTC), was developed for getting rid of faults. This time, Mo adsorption and Tc elution tests with PZC and PTC were carried out. As a result, the Mo adsorption performance of the PTC was lower than PZC, on the other hand, Tc elution performance of the PTC was higher than PZC.
Tc generators loading processTanimoto, Masataka; Amaya, D.*; Aoyama, Masashi; Kimura, Akihiro; Izumo, Hironobu; Tsuchiya, Kunihiko
JAEA-Review 2011-012, 13 Pages, 2011/06
JAEA-Review-2011-012.pdf:2.1MB
Tc is most commonly used as a radiopharmaceutical in the field of nuclear medicine, accounting for more than 80% of all diagnostic nuclear medicine procedure. The Tc is obtained from Mo, which is produced by fission of U ((n, f) method) and the neutron capture (n, ) method using the Mo target. However, a supplying of Mo is only depends on imports from any other countries, so JAEA find a way out at domestic production of a part of Mo that (n, ) method in cooperation with the industrial circles. On the other hand, INVAP has been working in the supply of Mo production facilities using LEU. This report provides descriptions the detail technical aspects related to the facility and operations for loading Tc generator. These key issues and technical provided in this report is believed to be useful for developing and updating them.
