Nanoscale structural analysis of BiNaTiO in high-temperature phases

Yoneda, Yasuhiro; Noguchi, Yuji*

Japanese Journal of Applied Physics, 60(SF), p.SFFA08_1 - SFFA08_10, 2021/11

https://doi.org/10.35848/1347-4065/ac19fd

BiNaTiO (abbreviated as BNT) is a lead-free material but exhibits relatively large piezoelectric properties, a lot of researches have been conducted. We performed local structural analysis using high-quality BNT with a stoichiometrically correct composition, and found a chemical order structure of Bi/Na in locally. BNT undergoes a phase transition to a cubic phase at 400C. We estimated that a new disorder structure will appear in the high-temperature phase. In the high temperature phase, pair distribution function (PDF) analysis using synchrotron radiation high-energy X-rays was performed. As a result, we found that Bi shifts from 200C, and this shift becomes an order parameter for the phase transition.

High temperature gas-cooled reactors

Takeda, Tetsuaki*; Inagaki, Yoshiyuki; Aihara, Jun; Aoki, Takeshi; Fujiwara, Yusuke; Fukaya, Yuji; Goto, Minoru; Ho, H. Q.; Iigaki, Kazuhiko; Imai, Yoshiyuki; et al.

High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02

https://doi.org/10.1016/C2018-0-05383-9

As a general overview of the research and development of a High Temperature Gas-cooled Reactor (HTGR) in JAEA, this book describes the achievements by the High Temperature Engineering Test Reactor (HTTR) on the designs, key component technologies such as fuel, reactor internals, high temperature components, etc., and operational experience such as rise-to-power tests, high temperature operation at 950C, safety demonstration tests, etc. In addition, based on the knowledge of the HTTR, the development of designs and component technologies such as high performance fuel, helium gas turbine and hydrogen production by IS process for commercial HTGRs are described. These results are very useful for the future development of HTGRs. This book is published as one of a series of technical books on fossil fuel and nuclear energy systems by the Power Energy Systems Division of the Japan Society of Mechanical Engineers.

Nanoscale structural analysis of BiNaTiO

Yoneda, Yasuhiro; Noguchi, Yuji*

Japanese Journal of Applied Physics, 59(SP), p.SPPA01_1 - SPPA01_7, 2020/11

https://doi.org/10.35848/1347-4065/aba2c2

We investigate A-site cation ordering in the ferroelectric perovskite BiNaTiO (BNT) by synchrotron X-ray total scattering. Although BNT has a problem of a low depolarization temperature, it is promising a lead-free piezoelectric material. Since the depolarization temperature is presumed to correspond to a relaxer like gradual order-disorder phase transition, local structure analysis is necessary to understand the structure of the diorder phase. Through this approach, the elusive connection between chemical heterogeneity and structural heterogeneity is revealed. Because of the large randomness, the Ti off-center shift is averaged out beyond the unit cell and the structure becomes very close to the average structure beyond the unit cell.

Hydrophobic platinum honeycomb catalyst to be used for tritium oxidation reactors

Iwai, Yasunori; Kubo, Hitoshi*; Oshima, Yusuke*; Noguchi, Hiroshi*; Edao, Yuki; Taniuchi, Junichi*

Fusion Science and Technology, 68(3), p.596 - 600, 2015/10

https://doi.org/10.13182/FST14-921

We have newly developed the hydrophobic platinum honeycomb catalysts applicable to tritium oxidation reactor since the honeycomb-shape catalyst can decrease the pressure drop. Two types of hydrophobic honeycomb catalyst have been test-manufactured. One is the hydrophobic platinum catalyst on a metal honeycomb. The other is the hydrophobic platinum catalyst on a ceramic honeycomb made of silicon carbide. The fine platinum particles around a few nanometers significantly improve the catalytic activity for the oxidation tritium at a tracer concentration. The hydrogen concentration in the gaseous feed slightly affects the overall reaction rate constant for hydrogen oxidation. Due to the competitive adsorption of hydrogen and water molecules on platinum surface, the overall reaction rate constant has the bottom value. The hydrogen concentration for the bottom value is 100 ppm under the dry feed gas. We have experimentally confirmed the activity of these honeycomb catalysts is as good as that of pellet-shape hydrophobic catalyst. The results support the hydrophobic honeycomb catalysts are applicable to tritium oxidation reactor.

Hydrophobic Pt catalyst for combustion of hydrogen isotopes at low temperatures

Iwai, Yasunori; Kubo, Hitoshi*; Sato, Katsumi; Oshima, Yusuke*; Noguchi, Hiroshi*; Taniuchi, Junichi*

Proceedings of 7th Tokyo Conference on Advanced Catalytic Science and Technology (TOCAT-7) (USB Flash Drive), 2 Pages, 2014/06

Hydrophobic platinum catalysts have been developed especially for combustion of hydrogen isotopes released in a nuclear facility. A new type of hydrophobic hydrogen combustion catalyst commercially named TKK-KNOITS catalyst is hardly susceptible to water mist and water vapor in the atmosphere and water produced by hydrogen combustion. It is capable of maintaining the activity even at relatively low temperatures. The TKK-KNOITS catalyst is superior to other previous hydrophobic catalysts in applicability to wide range of hydrogen concentration from very thin to dense. The catalyst which carrier is composed of inorganic oxide has thermal stability up to 873 K.

Suggestion of typical phases of in-vessel fuel-debris by thermodynamic calculation for decommissioning technology of Fukushima-Daiichi Nuclear Power Station

Ikeuchi, Hirotomo; Kondo, Yoshikazu*; Noguchi, Yoshihiro*; Yano, Kimihiko; Kaji, Naoya; Washiya, Tadahiro

Proceedings of International Nuclear Fuel Cycle Conference; Nuclear Energy at a Crossroads (GLOBAL 2013) (CD-ROM), p.1349 - 1356, 2013/09

Aerosol deposition and behavior on leaves in cool-temperate deciduous forests, 3; Estimation of fog deposition onto cool-temperate deciduous forest by the inferential method

Katata, Genki; Yamaguchi, Takashi*; Sato, Haruna*; Watanabe, Yoko*; Noguchi, Izumi*; Hara, Hiroshi*; Nagai, Haruyasu

Asian Journal of Atmospheric Environment, 7(1), p.17 - 24, 2013/03

https://doi.org/10.5572/ajae.2013.7.1.017

Fog deposition onto the cool-temperate deciduous forest in northern Japan was estimated by the inferential method using the parameterizations of deposition velocity and liquid water content of fog (LWC). Two parameterizations of fog deposition velocity derived from the field experiments and numerical simulations were tested. The empirical function between horizontal visibility (VIS) and LWC was applied to produce hourly LWC as input data of the inferential method. Weekly mean LWC computed from VIS had a good correlation with the one sampled by an active string-fog collector. Fog deposition calculated by the inferential method agreed with that computed from thorough fall data within the factors of 2 to 3. The results indicated that the inferential method using the current parameterizations of deposition velocity and LWC can provide a rough estimation of water input due to fog deposition onto cool-temperature deciduous forests.

Electronic and local structures of Mn-doped BiFeO crystals

Yoneda, Yasuhiro; Kitanaka, Yuki*; Noguchi, Yuji*; Miyayama, Masaru*

Physical Review B, 86(18), p.184112_1 - 184112_11, 2012/11

https://doi.org/10.1103/PhysRevB.86.184112

The electronic structure of complex oxides is important for understanding their functional properties. Here we report the results of investigating multiferroic BiFeO using various X-ray spectroscopy techniques. Zn- and Mn-codoped and Mn-doped BiFeO samples were prepared with the aim of improving ferroelectric properties of BiFeO. The valences of the doped Mn and host Fe were investigated. When oxygen vacancies exist in the sample, Mn acts as a hole acceptor. Furthermore, Mn and Fe stabilize the perovskite unit by changing their ionic radius. As a result, Mn and Fe atoms exhibit various valence states in the BiFeO system. Evidence of the electronic structure for Fe -O -Bi hybridization is also presented.

Irradiation history of Itokawa regolith material deduced from noble gases in the Hayabusa samples

Nagao, Keisuke*; Okazaki, Ryuji*; Nakamura, Tomoki*; Miura, Yayoi*; Osawa, Takahito; Bajo, Kenichi*; Matsuda, Shintaro*; Ebihara, Mitsuru*; Ireland, T.*; Kitajima, Fumio*; et al.

Science, 333(6046), p.1128 - 1131, 2011/08

https://doi.org/10.1126/science.1207785

A steroid surface materials record regolith processes and a history of cosmic-ray irradiation. Noble gas isotopes in three rocky grains from Itokawa have been determined. High concentrations of solar He, Ne, and Ar, as high as those in lunar soils, are released at variable temperatures from each sample. The isotopic compositions are essentially identical to those of solar wind but distinguishable in He relative abundance. These noble gas characteristics can be explained by repeated implantation and preferential loss of solar He by removal of weathered He-rich rim on the grain surface through friction among regolith grains on Itokawa. Residence time of regolith materials on Itokawa is alculated to be shorter than 10 Myr, suggesting that regolith materials of small asteroids would escape easily to space.

Recent progress in the energy recovery linac project in Japan

Sakanaka, Shogo*; Akemoto, Mitsuo*; Aoto, Tomohiro*; Arakawa, Dai*; Asaoka, Seiji*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; et al.

Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2338 - 2340, 2010/05

http://accelconf.web.cern.ch/AccelConf/IPAC10/papers/tupe091.pdf

Future synchrotron light source using a 5-GeV energy recovery linac (ERL) is under proposal by our Japanese collaboration team, and we are conducting R&D efforts for that. We are developing high-brightness DC photocathode guns, two types of cryomodules for both injector and main superconducting (SC) linacs, and 1.3 GHz high CW-power RF sources. We are also constructing the Compact ERL (cERL) for demonstrating the recirculation of low-emittance, high-current beams using above-mentioned critical technologies.