Database for corrosion under irradiation conditions (Contract research)

Sato, Tomonori; Hata, Kuniki; Kaji, Yoshiyuki; Ueno, Fumiyoshi; Inoue, Hiroyuki*; Taguchi, Mitsumasa*; Seito, Hajime*; Tada, Eiji*; Abe, Hiroshi*; Akiyama, Eiji*; et al.

JAEA-Review 2021-001, 123 Pages, 2021/06

JAEA-Review-2021-001.pdf:10.33MB

In the implement of the decommissioning of Fukushima Daiichi Nuclear Power Station (1F), there are many problems to be solved. Specially, the mitigation of the aging degradation by the corrosion of the structural materials is important to implement the decommissioning safely and continuously. However, there are limited data for the environmental factors of corrosion in 1F, and the condition of 1F is continuously changing. So, the literature data for the water radiolysis and the corrosion under irradiation are listed as the database of corrosion under irradiation in this report. And the new obtained radiolysis and corrosion data, which have not been reported in the literature and will be required in the decommissioning of 1F, are reported.

Development of fission product chemistry database ECUME for the LWR severe accident

Miwa, Shuhei; Nakajima, Kunihisa; Miyahara, Naoya; Nishioka, Shunichiro; Suzuki, Eriko; Horiguchi, Naoki; Liu, J.; Miradji, F.; Imoto, Jumpei; Afiqa, B. M.; et al.

Mechanical Engineering Journal (Internet), 7(3), p.19-00537_1 - 19-00537_11, 2020/06

https://doi.org/10.1299/mej.19-00537

We constructed the fission product (FP) chemistry database named ECUME for LWR severe accident. This version of ECUME is equipped with dataset of the chemical reactions and their kinetics constants for the reactions of cesium(Cs)-iodine(I)-boron(B)-molybdenum(Mo)-oxygen(O)-hydrogen(H) system in gas phase, the elemental model for the high temperature chemical reaction of Cs with stainless steel applied as the structural material in a reactor, and thermodynamic data for CsBO vapor species and solids of CsSiO and CsFeSiO for these chemical reactions. The ECUME will provide estimation of Cs distribution due to the evaluation of effects of interaction with BWR control material B and stainless steel on Cs behavior in the Fukushima Daiichi Nuclear Power Station.

Corrosion monitoring in humidity-controlled environment simulating gamma ray irradiation

Omori, Atsushi*; Akiyama, Eiji*; Abe, Hiroshi*; Hata, Kuniki; Sato, Tomonori; Kaji, Yoshiyuki; Inoue, Hiroyuki*; Taguchi, Mitsumasa*; Seito, Hajime*; Tada, Eiji*; et al.

Zairyo To Kankyo, 69(4), p.107 - 111, 2020/04

https://doi.org/10.3323/jcorr.69.107

To evaluate the effect of oxidants, which are formed by radiolysis of water under gamma ray irradiation, on the corrosion of a carbon steel in humid environment, ozone was introduced as a model oxidant in to humidity-controlled air at 50C in a thermo-hygrostat chamber. Corrosion monitoring was performed by using an Atmospheric Corrosion Monitor-type (ACM) sensor consisting of a carbon steel anode and an Ag cathode. The output current of the ACM sensor was increased with the increase in relative humidity and it was obviously increased with the increase in the introduced ozone concentration at each relative humidity. The results indicate that ozone accelerates the corrosion of the carbon steel. The effect of ozone on the corrosion acceleration is attributed to the fast reduction reaction and fast dissolution reaction in to water compared to that of oxygen.

Debris removal strategy, risk, debris characterization

Washiya, Tadahiro; Suzuki, Shunichi*

Nihon Kikai Gakkai-Shi, 122(1211), p.13 - 15, 2019/10

https://doi.org/10.1299/jsmemag.122.1211_13

International Topical Workshop on Fukushima Decommissioning Research (FDR 2019) was held in last May. In this report, the out-line of Track-2: Debris Removal Strategy, Risk, Debris Characterization was described. In this Task-2, "1F decommissioning strategy plan 2019" was introduced by NDF, and challenging tasks are explained. As 1F's R&D issues, debris cutting technologies, dust generation behavior analysis and risk evaluation was reported. In this paper, the out-line of Track 2 will be reported.

Study on chemisorption model of cesium hydroxide onto stainless steel type 304

Nakajima, Kunihisa; Nishioka, Shunichiro; Suzuki, Eriko; Osaka, Masahiko

Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 8 Pages, 2019/05

Cesium chemisorption models were developed for estimation of amount of cesium chemisorbed onto stainless steel type 304 (SS304) during light water reactor severe accident. However, existing chemisorption models cannot accurately reproduce experimental results. In this study, a modified cesium chemisorption model was constructed based on a penetration theory for gas-liquid mass transfer with chemical reaction and was able to adequately describe effects on concentration of cesium hydroxide in gaseous phase and silicon content in SS304. It was found that the modified model can more accurately reproduce the experimental data than the existing model.

Modelling of cesium chemisorption under nuclear power plant severe accident conditions

Miradji, F.; Suzuki, Chikashi; Nishioka, Shunichiro; Suzuki, Eriko; Nakajima, Kunihisa; Osaka, Masahiko; Barrachin, M.*; Do, T. M. D.*; Murakami, Kenta*; Suzuki, Masahide*

Proceedings of 9th Conference on Severe Accident Research (ERMSAR 2019) (Internet), 21 Pages, 2019/03

Generation method of underwater landmarks for ocean observation

Takahashi, Satoru*; Nota, Yoshiki*; Matsuda, Asahi*; Kawabata, Kuniaki; Suzuki, Tsuyoshi*; Takemura, Fumiaki*; Ogasawara, Kei*; Kaneko, Shunichi*

Journal of Signal Processing, 21(1), p.15 - 24, 2017/01

https://doi.org/10.2299/jsp.21.15

In recent years, many researchers try to observe the state of the global environment from marine information for the understanding of the global environment change. First, we introduce the recording system of underwater environment which is made by the authors. By using this system, we want to observe the change of global environment from the coral bleaching. In this paper, especially, we propose the generation method of underwater landmark which is used to measure the position of robot of oceanographic observation based on the dynamic image processing. In here, underwater landmark means the feature point in underwater image.

Study on development of evaluation technique of in-situ tracer test in Horonobe Underground Research Laboratory Project (Contract research)

Yokota, Hideharu; Amano, Kenji; Maekawa, Keisuke; Kunimaru, Takanori; Naemura, Yumi*; Ijiri, Yuji*; Motoshima, Takayuki*; Suzuki, Shunichi*; Teshima, Kazufumi*

JAEA-Research 2013-002, 281 Pages, 2013/06

JAEA-Research-2013-002.pdf:13.03MB

To evaluate permeable heterogeneity in a fracture and scale effects which are problems to be solved based on the mass transportation data of fractures in hostrock, a number of tracer tests are simulated in a fictitious single plate fracture generated on computer in this study. And the transport parameters, e.g. longitudinal dispersion length, true velocity and dilution rate, are identified by fitting one- and two-dimensional models to the breakthrough curves obtained from the simulations in order to investigate the applicability of these models to the evaluation of tracer test. As a result, one-dimensional model yields larger longitudinal dispersion length than two-dimensional model in the both cases of homogeneous and heterogeneous hydraulic conductivity fields of the fictitious fracture. And, the longitudinal dispersion length identified from a tracer test is smaller and/or larger than the macroscopic longitudinal dispersion length identified from whole fracture. It is clarified that these are occurred by shorter or longer distance between boreholes compare to the correlation length of geostatistical heterogeneity of fictitious fracture.

Development of a compact high-spatiotemporal-quality Yb:YAG thin-disk laser system using an optical parametric preamplifier

Kiriyama, Hiromitsu; Suzuki, Masayuki*; Daito, Izuru; Okada, Hajime; Ochi, Yoshihiro; Sato, Masatoshi*; Tamaoki, Yoshinori*; Yoshii, Takehiro*; Maeda, Junya*; Matsuoka, Shinichi*; et al.

Reza Kenkyu, 40(2), p.143 - 145, 2012/02

http://ci.nii.ac.jp/naid/10030152656

We demonstrate a compact, high-spatiotemporal-quality, high-intensity diode-pumped Yb:YAG thin-disk chirped-pulse amplification (CPA) laser system that incorporates a nonlinear preamplifier based on optical parametric chirped-pulse amplification (OPCPA). The stretched pulses are amplified in the OPCPA preamplifier and the following Yb:YAG main amplifier to 100 mJ at 10 Hz. The broadband amplified beam quality of 1.1 (horizontal direction) and 1.4 (vertical direction) times diffraction limited and pulse compression down to 470 fs with contrast of better than 10 have been achieved successfully.

Development of a high-contrast, high beam-quality, high-intensity laser

Kiriyama, Hiromitsu; Mori, Michiaki; Nakai, Yoshiki*; Shimomura, Takuya; Sasao, Hajime*; Tanaka, Momoko; Ochi, Yoshihiro; Tanoue, Manabu*; Kondo, Shuji; Kanazawa, Shuhei; et al.

Reza Kenkyu, 38(9), p.669 - 675, 2010/09

https://ci.nii.ac.jp/naid/10026690779

This paper reviews the temporal contrast and spatial beam quality improvement techniques in a high intensity Ti:sapphire laser system that is based on chirped-pulse amplification (CPA). We describe a low gain optical parametric chirped-pulse amplification (OPCPA) preamplifier that uses high energy, clean pulse seeding and is shown to significantly improve the contrast to better than 10-10 relative to the peak of the main femtosecond pulse. We also report the use of a diffractive optical element for beam homogenization of a 100 J level Nd:glass green pump laser, achieving a flat-topped spatial profile with a filling factor near 80 %.