Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ishida, Takekazu*; Vu, TheDang*; Shishido, Hiroaki*; Aizawa, Kazuya; Oku, Takayuki; Oikawa, Kenichi; Harada, Masahide; Kojima, Kenji M*; Miyajima, Shigeyuki*; Koyama, Tomio*; et al.
Journal of Low Temperature Physics, 214(3-4), p.152 - 157, 2024/02
Times Cited Count：0 Percentile：0.02(Physics, Applied)Sueoka, Shigeru; Kawakami, Tetsuo*; Suzuki, Kota*; Kagami, Saya; Yokoyama, Tatsunori; Shibazaki, Bunichiro*; Nagata, Mitsuhiro; Yamazaki, Ayu*; Higashino, Fumiko*; King, G. E.*; et al.
Fisshion, Torakku Nyusureta, (36), p.1 - 3, 2023/12
no abstracts in English
single crystals based on Bragg-dip analysis using a delay-line superconducting sensorShishido, Hiroaki*; Vu, TheDang*; Aizawa, Kazuya; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Oku, Takayuki; Soyama, Kazuhiko; Miyajima, Shigeyuki*; et al.
Journal of Applied Crystallography, 56(4), p.1108 - 1113, 2023/08
Times Cited Count：0 Percentile：0.02(Chemistry, Multidisciplinary)Suzuki, Kota*; Kawakami, Tetsuo*; Sueoka, Shigeru; Yamazaki, Ayu*; Kagami, Saya; Yokoyama, Tatsunori; Tagami, Takahiro*
Island Arc, 31(1), p.e12462_1 - e12462_15, 2022/09
Times Cited Count：1 Percentile：34.55(Geosciences, Multidisciplinary)Arai, Yosuke*; Kuroda, Kenta*; Nomoto, Takuya*; Tin, Z. H.*; Sakuragi, Shunsuke*; Bareille, C.*; Akebi, Shuntaro*; Kurokawa, Kifu*; Kinoshita, Yuto*; Zhang, W.-L.*; et al.
Nature Materials, 21(4), p.410 - 415, 2022/04
Times Cited Count：7 Percentile：77.62(Chemistry, Physical)Shishido, Hiroaki*; Nishimura, Kazuma*; Vu, TheDang*; Aizawa, Kazuya; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Oku, Takayuki; Soyama, Kazuhiko; et al.
IEEE Transactions on Applied Superconductivity, 31(9), p.2400505_1 - 2400505_5, 2021/12
Times Cited Count：0 Percentile：0(Engineering, Electrical & Electronic)In this study, we employed a superconducting detector, current-biased kinetic-inductance detector (CB-KID) for neutron imaging using a pulsed neutron source. We employed the delay-line method, and high spatial resolution imaging with only four reading channels was achieved. We also performed wavelength-resolved neutron imaging by the time-of-flight method. We obtained the neutron transmission images of a Gd-Al alloy sample, inside which single crystals of GdAl were grown, using the delay-line CB-KID. Single crystals were well imaged, in both shapes and distributions, throughout the Al-Gd alloy. We identified Gd nuclei via neutron transmissions that exhibited characteristic suppression above the neutron wavelength of 0.03 nm. In addition, the 
Gd resonance dip, a dip structure of the transmission caused by the nuclear reaction between an isotope and neutrons, was observed even when the number of events was summed over a limited area of 15 
m 
12 m. Gd selective imaging was performed using the resonance dip of Gd, and it showed clear Gd distribution even with a limited neutron wavelength range of 1 pm.
Vu, TheDang; Shishido, Hiroaki*; Aizawa, Kazuya; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Oku, Takayuki; Soyama, Kazuhiko; Miyajima, Shigeyuki*; et al.
Nuclear Instruments and Methods in Physics Research A, 1006, p.165411_1 - 165411_8, 2021/08
Times Cited Count：1 Percentile：18.91(Instruments & Instrumentation)Suzuki, Masaaki*; Ito, Mari*; Hashidate, Ryuta; Takahashi, Keita; Yada, Hiroki; Takaya, Shigeru
2020 9th International Congress on Advanced Applied Informatics (IIAI-AAI 2020), p.797 - 801, 2021/07
Taguchi, Shigeo; Taguchi, Katsuya; Makino, Risa; Yamanaka, Atsushi; Suzuki, Kazuyuki; Takano, Masato; Koshino, Katsuhiko; Ishida, Michihiko; Nakano, Takafumi; Yamaguchi, Toshiya
Nihon Hozen Gakkai Dai-17-Kai Gakujutsu Koenkai Yoshishu, p.499 - 502, 2021/07
In 2018, Tokai Reprocessing Plan (TRP) shifted to the decommissioning stage. In order to proceed with steady decommissioning work, TRP effort to enhance project management function. This paper describes the establishment and role of the Decommissioning Project Management Office, effectiveness of applying the project management tool and its utilization concept, and the method of materialize the equipment dismantling plan.
Vu, TheDang; Shishido, Hiroaki*; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Miyajima, Shigeyuki*; Oku, Takayuki; Soyama, Kazuhiko; Aizawa, Kazuya; et al.
Superconductor Science and Technology, 34(1), p.015010_1 - 015010_10, 2021/01
Times Cited Count：3 Percentile：27.71(Physics, Applied)Shishido, Hiroaki*; Nishimura, Kazuma*; Vu, TheDang*; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Miyajima, Shigeyuki*; Hidaka, Mutsuo*; Oku, Takayuki; et al.
Journal of Physics; Conference Series, 1590, p.012033_1 - 012033_8, 2020/10
Times Cited Count：0 Percentile：0.01(Engineering, Electrical & Electronic)
Xe ions on proton, deuteron, and carbon targetsSun, X. H.*; Wang, H.*; Otsu, Hideaki*; Sakurai, Hiroyoshi*; Ahn, D. S.*; Aikawa, Masayuki*; Fukuda, Naoki*; Isobe, Tadaaki*; Kawakami, Shunsuke*; Koyama, Shumpei*; et al.
Physical Review C, 101(6), p.064623_1 - 064623_12, 2020/06
Times Cited Count：5 Percentile：52.72(Physics, Nuclear)The spallation and fragmentation reactions of Xe induced by proton, deuteron and carbon at 168 MeV/nucleon were studied at RIKEN Radioactive Isotope Beam Factory via the inverse kinematics technique. The cross sections of the lighter products are larger in the carbon-induced reactions due to the higher total kinetic energy of carbon. The energy dependence was investigated by comparing the newly obtained data with previous results obtained at higher reaction energies. The experimental data were compared with the results of SPACS, EPAX, PHITS and DEURACS calculations. These data serve as benchmarks for the model calculations.
scattering length from 
photoproduction on the proton near the reaction thresholdIshikawa, Takatsugu*; Fujimura, Hisako*; Fukasawa, Hiroshi*; Hashimoto, Ryo*; He, Q.*; Honda, Yuki*; Hosaka, Atsushi; Iwata, Takahiro*; Kaida, Shun*; Kasagi, Jirota*; et al.
Physical Review C, 101(5), p.052201_1 - 052201_6, 2020/05
Times Cited Count：4 Percentile：45.12(Physics, Nuclear)Iizawa, Yuki*; Shishido, Hiroaki*; Nishimura, Kazuma*; Vu, TheDang*; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Miyajima, Shigeyuki*; Hidaka, Mutsuo*; et al.
Superconductor Science and Technology, 32(12), p.125009_1 - 125009_8, 2019/12
Times Cited Count：13 Percentile：59.07(Physics, Applied)Wang, H.*; Otsu, Hideaki*; Chiga, Nobuyuki*; Kawase, Shoichiro*; Takeuchi, Satoshi*; Sumikama, Toshiyuki*; Koyama, Shumpei*; Sakurai, Hiroyoshi*; Watanabe, Yukinobu*; Nakayama, Shinsuke; et al.
Communications Physics (Internet), 2(1), p.78_1 - 78_6, 2019/07
Times Cited Count：8 Percentile：56.2(Physics, Multidisciplinary)Searching for effective pathways for the production of proton- and neutron-rich isotopes through an optimal combination of reaction mechanism and energy is one of the main driving forces behind experimental and theoretical nuclear reaction studies as well as for practical applications in nuclear transmutation of radioactive waste. We report on a study on incomplete fusion induced by deuteron, which contains one proton and one neutron with a weak binding energy and is easily broken up. This reaction study was achieved by measuring directly the cross sections for both proton and deuteron for 
Pd at 50 MeV/u via inverse kinematics technique. The results provide direct experimental evidence for the onset of a cross-section enhancement at high energy, indicating the potential of incomplete fusion induced by loosely-bound nuclei for creating proton-rich isotopes and nuclear transmutation of radioactive waste.
observation of dislocation evolution in ferritic and austenitic stainless steels under tensile deformation by using neutron diffractionSato, Shigeo*; Kuroda, Asumi*; Sato, Kozue*; Kumagai, Masayoshi*; Harjo, S.; Tomota, Yo*; Saito, Yoichi*; Todoroki, Hidekazu*; Onuki, Yusuke*; Suzuki, Shigeru*
Tetsu To Hagane, 104(4), p.201 - 207, 2018/00
Times Cited Count：9 Percentile：44.29(Metallurgy & Metallurgical Engineering)Suzuki, Kiichi; Okita, Takatoshi; Aono, Shigenori
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Next Generation Nuclear Systems for Sustainable Development (FR-17) (USB Flash Drive), 10 Pages, 2017/06
Japan Atomic Energy Agency has developed mixed plutonium-uranium oxide (MOX) fuel fabrication technologies in large-scale and fabricated MOX fuel assemblies for experimental fast reactor "JOYO" and prototype fast reactor "MONJU" at Plutonium Fuel Production Facility (PFPF) since 1988. Low density pellet is adopted as MONJU fuel. For the low density pellet fabrication in large-scale, various challenges were encountered. In order to resolve these challenges, countermeasures such as new pore former with high softening temperature and improved granulation method for MOX powder were considered. In this presentation, accumulated MOX fuel fabrication technologies as mentioned above and recent R&D activity such as new pelletizing method, or die wall lubrication pelletizing, for low-decontaminated TRU fuel fabrication will be discussed.
=100 mm spectrometer and correction of interferences between Th, U, and Pb with natural monaziteShimizu, Mayuko; Shibata, Kenji*; Suzuki, Kazuhiro; Sueoka, Shigeru; Niwa, Masakazu
Journal of Mineralogical and Petrological Sciences, 112(2), p.88 - 96, 2017/04
Times Cited Count：3 Percentile：10.11(Mineralogy)This paper outlines an advanced procedure involving the chemical Th-U-total Pb isochron method (CHIME) dating of monazite using a field-emission electron probe microanalyzer (FE-EPMA) equipped with spectrometers of 100 mm Rowland circle (R) radius. The higher count rate of R = 100 mm wavelength dispersive spectrometer (WDS) compared to R = 140 mm WDS enables measurements to be taken in a shorter time. CHIME dating using R = 100 mm WDS had previously been difficult because of lower resolution compared to that of R = 140 mm WDS. This problem has been overcome by a new interference correction method using natural monazites.
2015.12Horigome, Kazushi; Suzuki, Hisanori; Suzuki, Yoshimasa; Ishibashi, Atsushi; Taguchi, Shigeo; Inada, Satoshi; Kuno, Takehiko; Surugaya, Naoki
JAEA-Technology 2016-026, 21 Pages, 2016/12
JAEA-Technology-2016-026.pdf:1.14MB
In order to mitigate potential hazards of storage plutonium in solution such as hydrogen generation, conversion of plutonium solution into MOX powder has been carried out since 2014 in the Plutonium Conversion Development Facility. With respect to the samples taken from the conversion process, about 3500 items of plutonium/uranium solutions and MOX powders have been analyzed for the operation control in the related analytical laboratories at the Tokai Reprocessing Plant. This paper describes the reports on analytical activities and related maintenance works in the analytical laboratories conducted from April 2014 to December 2015.
Sato, Shigeo*; Onuki, Yusuke*; Shobu, Takahisa; Shiro, Ayumi*; Tashiro, Hitoshi*; Todoroki, Hidekazu*; Suzuki, Shigeru*
Kinzoku, 86(8), p.654 - 660, 2016/08
no abstracts in English
