Pd nanoparticles on the outer surface of microporous aluminosilicates for the direct alkylation of benzenes using alkanes

Misaki, Satoshi*; Miwa, Hiroko*; Ito, Takashi; Yoshida, Takefumi*; Hasegawa, Shingo*; Nakamura, Yukina*; Tokutake, Shunta*; Takabatake, Moe*; Shimomura, Koichiro*; Chun, W.-J.*; et al.

ACS Catalysis, 13(18), p.12281 - 12287, 2023/09

https://doi.org/10.1021/acscatal.3c02309

Experiment and numerical simulation of pulsation flow in single channel for Li-7 enrichment technology development by MCCCE method

Horiguchi, Naoki; Yoshida, Hiroyuki; Kitatsuji, Yoshihiro; Hasegawa, Makoto*; Kishimoto, Tadafumi*

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 7 Pages, 2023/05

From the viewpoint of energy security in Japan and reduction of the environmental load, continuous operation of light water reactors is essential. Since a pH adjuster with enriched Li-7 ions is required for water quality control on PWR, the development of Li-7 enrichment technology is one of the key issues. The multi-channel counter-current electrophoresis (MCCCE) method has been developed as the technology with a low environmental load. To put this method into practical use, it is necessary to understand Li-7 ion behavior in the channel flow and optimize the experimental condition to separate Li-7 and its isotope. In this paper, to understand Li-7 ion behavior in a single channel of the experimental apparatus, a numerical simulation method based on a computational fluid dynamics (CFD) code with a particle tracking method, TPFIT-LPT, was developed. In the method, the motion of multiple ions under the electric field was simulated as a particle with an added velocity by the electric field. The difference in the isotopes was represented by changing of the magnitude of the added velocity. We also considered that although it is impossible to measure the behavior of each ion, it is important to measure the flow velocity of the bulk fluid for the validation of the numerical simulation. We developed a lab-scale experimental apparatus in which the single channel of the actual apparatus was simplified to measure the flow velocity by Particle Image Velocimetry (PIV). We set a pulsation flow condition on the lab-scale experiment, which is one of difficult conditions for the numerical simulation, and measured the velocity. As the result, we confirmed that the pulsation flow was reproduced. We set the measured data as the inlet boundary condition of the numerical simulation and conducted it. As the numerical result, we confirmed the ions affected by the electric field moved upstream with pulsation. We also confirmed the effect of the electric field on the motion of the isotope.

Translational study for stereotactic body radiotherapy against non-small cell lung cancer, including oligometastases, considering cancer stem-like cells enable predicting clinical outcome from data

Saga, Ryo*; Matsuya, Yusuke; Sato, Hikari*; Hasegawa, Kazuki*; Obara, Hideki*; Komai, Fumio*; Yoshino, Hironori*; Aoki, Masahiko*; Hosokawa, Yoichiro*

Radiotherapy and Oncology, p.109444_1 - 109444_9, 2023/00

https://doi.org/10.1016/j.radonc.2022.109444

When treating non-small cell lung cancer (NSCLC), stereotactic body radiotherapy (SBRT) with high-dose irradiation is often utilized. The fractionation schemes and curative effects can be evaluated by mathematical models for predicting cell survival curve. Such model parameters can be determined from in vitro experiment, but they are empirically determined based on experiences in clinics. As such, there is a large gap between in vitro and clinical study. As such background, translational study between in vitro cell survival and clinical curative effects is necessary. In this study, explicitly considering existence of cancer stem-like cells (CSCs), we developed an all-in-one model for predicting both in vitro cell survival and clinical curative effects (integrated microdosimetric-kinetic (IMK) model) and performed retrospective evaluation of clinical outcomes following SBRT for NSCLC in Hirosaki University Hospital. As a result, the IMK model successfully reproduced both in vitro cell survival and the tumor control probability with various fractionation schemes (i.e., 6-10 Gy per fraction). The developed model would contribute on precisely understanding the impact of CSCs on curative effects after SBRT for NSCLC with high precision.

Development of local-scale high-resolution atmospheric dispersion and dose assessment system

Nakayama, Hiromasa; Onodera, Naoyuki; Satoh, Daiki; Nagai, Haruyasu; Hasegawa, Yuta; Idomura, Yasuhiro

Journal of Nuclear Science and Technology, 59(10), p.1314 - 1329, 2022/10

https://doi.org/10.1080/00223131.2022.2038302

We developed a local-scale high-resolution atmospheric dispersion and dose assessment system (LHADDAS) for safety and consequence assessment of nuclear facilities and emergency response to nuclear accidents or deliberate releases of radioactive materials in built-up urban areas. This system is composed of pre-processing of input files, main calculation by local-scale high-resolution atmospheric dispersion model using large-eddy simulation (LOHDIM-LES) and real-time urban dispersion simulation model based on a lattice Boltzmann method (CityLBM), and post-processing of dose-calculation by simulation code powered by lattice dose-response functions (SIBYL). LHADDAS has a broad utility and offers superior performance in (1) simulating turbulent flows, plume dispersion, and dry deposition under realistic meteorological conditions, (2) performing real-time tracer dispersion simulations using a locally mesh-refined lattice Boltzmann method, and (3) estimating air dose rates of radionuclides from air concentrations and surface deposition in consideration of the influence of individual buildings and structures. This system is promising for safety assessment of nuclear facilities as an alternative to wind tunnel experiments, detailed pre/post-analyses of a local-scale radioactive plume dispersion in case of nuclear accidents, and quick response to emergency situations resulting from deliberate release of radioactive materials by a terrorist attack in an urban central district area.

Measurement of the differential cross sections of the elastic scattering in momentum range 470 to 850 MeV/

Miwa, Koji*; Fujita, Manami; Hasegawa, Shoichi; Hosomi, Kenji; Ichikawa, Yudai; Imai, Kenichi*; Nanamura, Takuya; Naruki, Megumi; Sako, Hiroyuki; Sato, Susumu; et al.

Physical Review C, 104(4), p.045204_1 - 045204_20, 2021/10

https://doi.org/10.1103/PhysRevC.104.045204

Real-time tracer dispersion simulations in Oklahoma City using the locally mesh-refined lattice Boltzmann method

Onodera, Naoyuki; Idomura, Yasuhiro; Hasegawa, Yuta; Nakayama, Hiromasa; Shimokawabe, Takashi*; Aoki, Takayuki*

Boundary-Layer Meteorology, 179(2), p.187 - 208, 2021/05

https://doi.org/10.1007/s10546-020-00594-x

A plume dispersion simulation code named CityLBM enables a real time simulation for several km by applying adaptive mesh refinement (AMR) method on GPU supercomputers. We assess plume dispersion problems in the complex urban environment of Oklahoma City (JU2003). Realistic mesoscale wind boundary conditions of JU2003 produced by a Weather Research and Forecasting Model (WRF), building structures, and a plant canopy model are introduced to CityLBM. Ensemble calculations are performed to reduce turbulence uncertainties. The statistics of the plume dispersion field, mean and max concentrations show that ensemble calculations improve the accuracy of the estimation, and the ensemble-averaged concentration values in the simulations over 4 km areas with 2-m resolution satisfied factor 2 agreements for 70% of 24 target measurement points and periods in JU2003.

Bromine-isotope selective ionization using field-free alignment of IBr isotopologues with a switched nanosecond laser pulse

Akagi, Hiroshi*; Kumada, Takayuki; Otobe, Tomohito*; Itakura, Ryuji*; Hasegawa, Hirokazu*; Oshima, Yasuhiro*

Chemistry Letters, 49(4), p.416 - 418, 2020/04

https://doi.org/10.1246/cl.200024

Simulation study of the effects of buildings, trees and paved surfaces on ambient dose equivalent rates outdoors at three suburban sites near Fukushima Dai-ichi

Kim, M.; Malins, A.; Yoshimura, Kazuya; Sakuma, Kazuyuki; Kurikami, Hiroshi; Kitamura, Akihiro; Machida, Masahiko; Hasegawa, Yukihiro*; Yanagi, Hideaki*

Journal of Environmental Radioactivity, 210, p.105803_1 - 105803_10, 2019/12

https://doi.org/10.1016/j.jenvrad.2018.09.001

To improve the accuracy of simulations for air dose rates over fallout contaminated areas, the distribution of the radionuclides within the environment should be modelled realistically, e.g. considering differences in radioactivity levels between agricultural land, urban surfaces, and forest compartments. Moreover simulations should model the shielding of rays by buildings, trees and land topography. Here we outline a system for generating three dimensional models of urban and rural areas in Fukushima Prefecture. The Cs and Cs radioactivity distribution can be set flexibly across the different components of the model. The models incorporate realistic representations of local buildings, based on nine common Japanese designs, individual conifer and broadleaf trees, and the topography of the land surface. Models are generated from Digital Elevation Model (DEM) and Digital Surface Model (DSM) datasets, and refined by users assisted with ortho-photographs of target sites. Completed models are exported from the system in a format suitable for the Particle and Heavy Ion Transport code System (PHITS) for the calculation of air dose rates and other radiological quantities. The system is demonstrated by modelling a suburban area 4 km from the Fukushima Daiichi Nuclear Power Plant that has yet to be decontaminated. Air dose rates calculated in PHITS were correlated with measurements taken across the site in a car-borne survey.

Negative muonium ion production with a C12A7 electride film

Otani, Masashi*; Fukao, Yoshinori*; Futatsukawa, Kenta*; Kawamura, Naritoshi*; Matoba, Shiro*; Mibe, Tsutomu*; Miyake, Yasuhiro*; Shimomura, Koichiro*; Yamazaki, Takayuki*; Hasegawa, Kazuo; et al.

Journal of Physics; Conference Series, 1350, p.012067_1 - 012067_6, 2019/12

https://doi.org/10.1088/1742-6596/1350/1/012067

Negative muonium atom (ee, Mu) has unique features stimulating potential interesting for several scientific fields. Since its discovery in late 1980's in vacuum, it has been discussed that the production efficiency would be improved using a low-work function material. C12A7 was a well-known insulator as a constituent of alumina cement, but was recently confirmed to exhibit electric conductivity by electron doping. The C12A7 electride has relatively low-work function (2.9 eV). In this paper, the negative muonium production measurement with several materials including a C12A7 electride film will be presented. Measured production rate of the Mu were 10/s for all the Al, electride, and SUS target. Significant enhancement on electride target was not observed, thus it is presumed that the surface condition should be more carefully treated. There was no material dependence of the Mu averaged energy: it was 0.20.1keV.

Bunch size measurement with high time resolution for RF accelerated muon beam

Sue, Yuki*; Iijima, Toru*; Inami, Kenji*; Yotsuzuka, Mai*; Iinuma, Hiromi*; Nakazawa, Yuga*; Otani, Masashi*; Kawamura, Naritoshi*; Shimomura, Koichiro*; Futatsukawa, Kenta*; et al.

Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.55 - 60, 2019/07

https://www.pasj.jp/web_publish/pasj2019/proceedings/PDF/WEOI/WEOI05.pdf

The result of bunch size measurement of muon accelerated by RFQ up to 89 keV is presented in this paper. A four-stage muon linac for precise measurement of muon property is under construction in the J-PARC. The demonstration of the first muon RF acceleration with an RFQ linac was conducted and the transverse profile of the accelerated muons was measured in 2017. As one of the remaining issues for the beam diagnostic system, the longitudinal beam profile after the RFQ should be measured to match the profile to the designed acceptance of the subsequent accelerator. For this purpose, the new longitudinal beam monitor using the microchannel plate is under development. The time resolution of the monitor aims to be around 30 to 40 ps corresponding to 1% of a period of an operating frequency of the accelerator, which is 324 MHz. On November 2018, the bunch size of accelerated negative muonium ion of 89 keV with the RFQ was measured using this monitor at the J-PARC MLF. The measured bunch width is ns, which is consistent with the simulation.