Deposition and dispersion of radio-cesium released due to the Fukushima Nuclear accident, 2; Sensitivity to aerosol microphysical properties of Cs-bearing microparticles (CsMPs)

Kajino, Mizuo*; Adachi, Koji*; Igarashi, Yasuhito*; Satou, Yukihiko; Sawada, Morihiro*; Sekiyama, Tsuyoshi*; Zaizen, Yuji*; Saya, Akane*; Tsuruta, Haruo*; Moriguchi, Yuichi*

Journal of Geophysical Research; Atmospheres, 126(1), p.e2020JD033460_1 - e2020JD033460_23, 2021/01

https://doi.org/10.1029/2020JD033460

Intercomparison of numerical atmospheric dispersion prediction models for emergency response to emissions of radionuclides with limited source information in the Fukushima Dai-ichi Nuclear Power Plant accident

Iwasaki, Toshiki*; Sekiyama, Tsuyoshi*; Nakajima, Teruyuki*; Watanabe, Akira*; Suzuki, Yasushi*; Kondo, Hiroaki*; Morino, Yu*; Terada, Hiroaki; Nagai, Haruyasu; Takigawa, Masayuki*; et al.

Atmospheric Environment, 214, p.116830_1 - 116830_11, 2019/10

https://doi.org/10.1016/j.atmosenv.2019.116830

The utilization of numerical atmospheric dispersion prediction (NDP) models for accidental discharge of radioactive substances was recommended by a working group of the Meteorological Society of Japan. This paper is to validate the recommendation through NDP model intercomparison in the accidental release from the Fukushima Dai-ichi Nuclear Power Plant in 2011. Emission intensity is assumed to be constant during the whole forecast period for the worst-case scenario unless time sequence of emission is available. We expect to utilize forecasts of surface air contaminations for preventions of inhalations of radioactive substances, and column-integrated amounts for mitigation of radiation exposure associated with wet deposition. Although NDP forecasts have ensemble spread, they commonly figure out relative risk in space and time. They are of great benefit to disseminating effective warnings to public without failure. The multi-model ensemble technique may be effective to improve the reliability.

Atmospheric modeling of Cs plumes from the Fukushima Daiichi Nuclear Power Plant; Evaluation of the model intercomparison data of the Science Council of Japan

Kitayama, Kyo*; Morino, Yu*; Takigawa, Masayuki*; Nakajima, Teruyuki*; Hayami, Hiroshi*; Nagai, Haruyasu; Terada, Hiroaki; Saito, Kazuo*; Shimbori, Toshiki*; Kajino, Mizuo*; et al.

Journal of Geophysical Research; Atmospheres, 123(14), p.7754 - 7770, 2018/07

https://doi.org/10.1029/2017JD028230

We compared seven atmospheric transport model results for Cs released during the Fukushima Daiichi Nuclear Power Plant accident. All the results had been submitted for a model intercomparison project of the Science Council of Japan in 2014. We assessed model performance by comparing model results with observed hourly atmospheric concentrations of Cs, focusing on nine plumes over the Tohoku and Kanto regions. The results showed that model performance for Cs concentrations was highly variable among models and plumes. We also assessed model performance for accumulated Cs deposition. Simulated areas of high deposition were consistent with the plume pathways, though the models that best simulated Cs concentrations were different from those that best simulated deposition. The ensemble mean of all models consistently reproduced Cs concentrations and deposition well, suggesting that use of a multimodel ensemble results in more effective and consistent model performance.

High-resolution resonance photoemission study of Ce (=Pt, Pd; =P, As, Sb)

Iwasaki, T.*; Sekiyama, Akira*; Yamasaki, Atsushi*; Okazaki, Makoto*; Kadono, Koji*; Utsunomiya, Hiroshi*; Imada, Shin*; Saito, Yuji; Muro, Takayuki*; Matsushita, Tomohiro*; et al.

Physical Review B, 65(19), p.195109_1 - 195109_9, 2002/05

https://doi.org/10.1103/PhysRevB.65.195109

no abstracts in English

Probing bulk states of correlated electron systems by high-resolution resonance photoemission

Sekiyama, Akira*; Iwasaki, T.*; Matsuda, K.*; Saito, Yuji; Onuki, Yoshichika*; Suga, Shigemasa*

Nature, 403(6768), p.396 - 398, 2000/01

https://doi.org/10.1038/35000140

no abstracts in English

Development of worksite visualization system for Fugen NPS, 1; Development of hybrid tracking technique

Shimoda, Hiroshi*; Ishii, Hirotake*; Sekiyama, Tomoki*; Bian, Z.*; Izumi, Masanori; Morishita, Yoshitsugu

no journal, , 

This study aims at developing an augmented reality system to support maintenance work of nuclear power plants. An accurate and wide-range tracking method is required as a key technology in order to realize the system. In this study, a new tracking method using multi-camera and gyro sensor has been developed in order to enlarge the area where the tracking is available with limited number of markers. Experimental evaluation result shows that the area where the developed method can cover is about 3 times larger than the method using single camera.

International comparison of atmospheric dispersion simulations of radioactive materials

Takigawa, Masayuki*; Nagai, Haruyasu; Morino, Yu*; Sekiyama, Tsuyoshi*; Hayami, Hiroshi*; Tanaka, Taichu*; Nakajima, Teruyoshi*; Shibata, Tokushi*

no journal, , 

no abstracts in English

Environmental dynamics analysis of Cs due to the Fukushima Daiichi Nuclear Power Station accident based on the intercomparison of atmospheric dispersion models

Morino, Yu*; Kitayama, Kyo*; Takigawa, Masayuki*; Nakajima, Teruyuki*; Hayami, Hiroshi*; Nagai, Haruyasu; Terada, Hiroaki; Saito, Kazuo*; Shimbori, Toshiki*; Kajino, Mizuo*; et al.

no journal, , 

For the evaluation of the validity and variability of atmospheric transport model results, we compared results of seven models submitted for the model inter-comparison project of Science Council of Japan to simulate Cs released from the Fukushima Daiichi Nuclear Power Plant. Model reproducibility was assessed with the observed hourly atmospheric concentrations of Cs in Tohoku and Kanto regions. Among nine plumes from 12 to 21 in March 2011, performance of the models was the best for the plume which dispersed over the Kanto region in 15 March. The models generally reproduced the observed Cs concentrations in plumes which widely spread inland of Tohoku or Kanto regions. By contrast, the models largely underestimated the observed Cs concentrations for the case which passed coastal areas of Japan. Ensemble average of seven models showed reasonable performance for most of plumes, and no individual models reproduced better than the ensemble average.

2nd atmospheric model intercomparison project for Fukushima Daiichi Nuclear Power Plant Accident on March 2011; 2nd FDNPP-MIP

Sato, Yosuke*; Takigawa, Masayuki*; Sekiyama, Tsuyoshi*; Kajino, Mizuo*; Grahn, H.*; Brnnstrm, N.*; von Schoenberg, P.*; Kondo, Hiroaki*; Terada, Hiroaki; Nagai, Haruyasu; et al.

no journal, , 

The second intercomparison of atmospheric model targeting on the radionuclide (i.e. Cs) released from the Fukushima Daiichi Nuclear Power Plant (FDNPP) on March 2011 is conducted. Thirteen atmospheric models, which include both the Lagrangian- and Eulerian-based dispersion models, participate in this model intercomparison project (MIP). The purposes of this MIP are to (1) understand the transport process of the radionuclide in atmosphere, (2) estimate the uncertainties in wet and dry deposition process among the models, (3) reveal the essential key processes to reproduce the plume of Cs, (4) assess the multi-model ensemble mean, and (5) obtain the knowledge for improving the physical processes of the models. To exclude the uncertainties of the model results originated from the emission inventory, all models used the same emission inventory. The meteorological data with fine spatiotemporal resolution, which was calculated by the Japanese operational weather forecast model coupled with the local ensemble transform Kalman Filter data assimilation system, was applied for all models to reduce the uncertainties originated from the difference in the meteorological field. As well as the comparison among the models, the comparison between the models and in-situ measurement from the national suspended particle matter (SPM) sampling network are conducted. The comparisons between the model results and the SPM data indicate that the Cs concentration near the FDNPP transported without precipitation process was relatively well reproduced by using the meteorological data with fine spatiotemporal resolution. On the contrary, Cs concentration accompanied with precipitation has large inter-model spread. In the presentation, we will discuss the more detailed analyses about the physical process to determine the Cs concentration.

Model intercomparison study for atmospheric Cs from the Fukushima Daiichi Nuclear Power Plant Accident using identical input data

Sato, Yosuke*; Takigawa, Masayuki*; Sekiyama, Tsuyoshi*; Kajino, Mizuo*; Terada, Hiroaki; Nagai, Haruyasu; Kondo, Hiroaki*; Uchida, Junya*; Goto, Daisuke*; Qulo, D.*; et al.

no journal, , 

An intercomparison of atmospheric dispersion model targeting on the physical process of Cs released from the Fukushima Daiichi Nuclear Power Plant was conducted. Twelve atmospheric models participated in this project. To exclude the uncertainties of the model result due to the emission inventory and meteorological data, all models used the same emission and meteorological data. Concentration of Cs from the national suspended particle matter monitoring network and the deposition density by the aircraft were used for the comparison between results of the model and observation. Our analyses elucidated the figure of merit in space (FMS) of the model ensemble mean was improved from a previous model intercomparson about the accumulated deposition. The model ensemble mean captured approximately 36% of the observed high concentration. The inter-model spread of the capture rate was from 8% to 38%. It was originated from the difference in deposition and diffusion processes among the models.