Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sasaki, Michiya*; Furukawa, Kyoji*; Satoh, Daiki; Shimada, Kazumasa; Kudo, Shinichi*; Takagi, Shunji*; Takahara, Shogo; Kai, Michiaki*
Journal of Radiation Protection and Research, 48(2), p.90 - 99, 2023/06
This paper reports on the calculation code that is the result of the activities of the "Task Group for Development of Cancer Risk Estimation Codes Associated with Radiation Exposure (FY2020-2021)" established by the Japan Health Physics Society. In order to promote research on the estimation of cancer risk associated with radiation exposure, the Task Group decided to disclose the source code, including the algorithm and parameters used in the calculations, and to release the code under a license that permits modification and redistribution of the code. The computational code was named SUMRAY and coded in two computer languages, that is R and Python. The code is capable of calculating the accumulated excess risk using Monte Carlo methods with a 95% confidence interval. The results of SUMRAY were compared with the results of the existing codes whose source code is not publicly available, under the same calculation conditions. From the results, it was found that they were in reasonable agreement within the confidence interval. It is expected that SUMRAY, an open-source software, will be used as a common basis for cancer risk estimation studies associated with radiation exposure.
Zn
Y
alloy using X-ray photoelectron spectroscopyMiyazaki, Hidetoshi*; Akatsuka, Tatsuyoshi*; Kimura, Koji*; Egusa, Daisuke*; Sato, Yohei*; Itakura, Mitsuhiro; Takagi, Yasumasa*; Yasui, Akira*; Ozawa, Kenichi*; Mase, Kazuhiko*; et al.
Materials Transactions, 64(6), p.1194 - 1198, 2023/06
Times Cited Count：1 Percentile：48.82(Materials Science, Multidisciplinary)We investigated the electronic structure of the MgZnY alloy using hard and soft X-ray photoemission spectroscopy and electronic band structure calculations to understand the mechanism of the phase stability of this material. Electronic structure of the MgZnY alloy showed a semi-metallic electronic structure with a pseudo-gap at the Fermi level. The observed electronic structure of the MgZnY alloy suggests that the presence of a pseudogap structure is responsible for phase stability.
Yokoyama, Sumi*; Tsujimura, Norio; Hashimoto, Makoto; Yoshitomi, Hiroshi; Kato, Masahiro*; Kurosawa, Tadahiro*; Tatsuzaki, Hideo*; Sekiguchi, Hiroshi*; Koguchi, Yasuhiro*; Ono, Koji*; et al.
Journal of Radiation Protection and Research, 47(1), p.1 - 7, 2022/03
Background: In Japan, new regulations that revise the dose limit for the lens of the eye (the lens), operational quantities, and measurement positions for the lens dose were enforced in April 2021. Based on the international safety standards, national guidelines, the results of the Radiation Safety Research Promotion Fund of the Nuclear Regulatory Authority, and other studies, the Working Group of Radiation Protection Standardization Committee, the Japan Health Physics Society (JHPS) developed a guideline for radiation dose monitoring for the lens. Materials and Methods: The Working Group of the JHPS discussed the criteria of non-uniform exposure and the management criteria set to not exceed the dose limit for the lens. Results and Discussion: In July 2020, the JHPS guideline was published. The guideline consists of three parts: main text, explanations, and 26 questions. In the questions, the corresponding answers were prepared, and specific examples were provided to enable similar cases to be addressed. Conclusion: With the development of guideline on radiation dose monitoring of the lens, radiation managers and workers will be able to smoothly comply with revised regulations and optimise radiation protection.
Yokoyama, Sumi*; Iwai, Satoshi*; Tsujimura, Norio; Hashimoto, Makoto; Yoshitomi, Hiroshi; Kato, Masahiro*; Kurosawa, Tadahiro*; Tatsuzaki, Hideo*; Sekiguchi, Hiroshi*; Koguchi, Yasuhiro*; et al.
Proceedings of 15th International Congress of the International Radiation Protection Association (IRPA-15) (Internet), 8 Pages, 2022/00
SGo, Shintaro*; Ideguchi, Eiji*; Yokoyama, Rin*; Aoi, Nori*; Azaiez, F.*; Furutaka, Kazuyoshi; Hatsukawa, Yuichi; Kimura, Atsushi; Kisamori, Keiichi*; Kobayashi, Motoki*; et al.
Physical Review C, 103(3), p.034327_1 - 034327_8, 2021/03
Times Cited Count：4 Percentile：55.56(Physics, Nuclear)
F from 
O
?Tang, T. L.*; Uesaka, Tomohiro*; Kawase, Shoichiro; Beaumel, D.*; Dozono, Masanori*; Fujii, Toshihiko*; Fukuda, Naoki*; Fukunaga, Taku*; Galindo-Uribarri, A.*; Hwang, S. H.*; et al.
Physical Review Letters, 124(21), p.212502_1 - 212502_6, 2020/05
Times Cited Count：14 Percentile：73.46(Physics, Multidisciplinary)The structure of a neutron-rich F nucleus is investigated by a quasifree (
) knockout reaction. The sum of spectroscopic factors of 
orbital is found to be 1.0 
0.3. The result shows that the O core of F nucleus significantly differs from a free O nucleus, and the core consists of 
35% O
, and 65% excited O. The result shows that the O core of F nucleus significantly differs from a free O nucleus. The result may infer that the addition of the 
proton considerably changes the neutron structure in F from that in O, which could be a possible mechanism responsible for the oxygen dripline anomaly.
Tc production facility at the high temperature engineering test reactorHo, H. Q.; Ishida, Hiroki*; Hamamoto, Shimpei; Ishii, Toshiaki; Fujimoto, Nozomu*; Takaki, Naoyuki*; Ishitsuka, Etsuo
Nuclear Engineering and Design, 352, p.110174_1 - 110174_7, 2019/10
Times Cited Count：1 Percentile：10.81(Nuclear Science & Technology)Ishitsuka, Etsuo; Matsunaka, Kazuaki*; Ishida, Hiroki*; Ho, H. Q.; Ishii, Toshiaki; Hamamoto, Shimpei; Takamatsu, Kuniyoshi; Kenzhina, I.*; Chikhray, Y.*; Kondo, Atsushi*; et al.
JAEA-Technology 2019-008, 12 Pages, 2019/07
JAEA-Technology-2019-008.pdf:2.37MB
As a summer holiday practical training 2018, the feasibility study for nuclear design of a nuclear battery using HTTR core was carried out. As a result, it is become clear that the continuous operations for about 30 years at 2 MW, about 25 years at 3 MW, about 18 years at 4 MW, about 15 years at 5 MW are possible. As an image of thermal design, the image of the nuclear battery consisting a cooling system with natural convection and a power generation system with no moving equipment is proposed. Further feasibility study to confirm the feasibility of nuclear battery will be carried out in training of next fiscal year.
filament arc-driven multi-cusp ion source for iBNCTShibata, Takanori*; Takagi, Akira*; Ikegami, Kiyoshi*; Sugimura, Takashi*; Nammo, Kesao*; Naito, Fujio*; Kobayashi, Hitoshi*; Kurihara, Toshikazu*; Honda, Yosuke*; Sato, Masaharu*; et al.
Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.385 - 387, 2018/10
Kondo, Yasuhiro; Asano, Hiroyuki*; Chishiro, Etsuji; Hirano, Koichiro; Ishiyama, Tatsuya; Ito, Takashi; Kawane, Yusuke; Kikuzawa, Nobuhiro; Meigo, Shinichiro; Miura, Akihiko; et al.
Proceedings of 28th International Linear Accelerator Conference (LINAC 2016) (Internet), p.298 - 300, 2017/05
We have constructed a linac for development of various accelerator components at J-PARC. The ion source is same as the J-PARC linac's, and the RFQ is a used one in the J-PARC linac. The beam energy is 3 MeV and nominal beam current is 30 mA. The accelerator has been already commissioned, and the first development program, laser-charge-exchange experiment for the transmutation experimental facility, has been started. In this paper, present status of this 3-MeV linac is presented.
Hirano, Koichiro; Asano, Hiroyuki; Ishiyama, Tatsuya; Ito, Takashi; Okoshi, Kiyonori; Oguri, Hidetomo; Kondo, Yasuhiro; Kawane, Yusuke; Kikuzawa, Nobuhiro; Sato, Yoshikatsu; et al.
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.310 - 313, 2016/11
We have used a beam scraper with the incident angle of 65deg to reduce the beam power deposition density in the MEBT between a 324 MHz RFQ and a 50-MeV DTL of the J-PARC linac. The 65
scraper was irradiated by the H
beam up to particle number of 1.47E22. We observed a lot of surface projections with several hundred micrometers high in the beam irradiation damage on the scraper by using the laser microscope. In order to study the limits of scrapers, we constructed a new 3 MeV linac at J-PARC. We will conduct the scraper irradiation test at the end of this year.
Naito, Fujio*; Anami, Shozo*; Ikegami, Kiyoshi*; Uota, Masahiko*; Ouchi, Toshikatsu*; Onishi, Takahiro*; Oba, Toshiyuki*; Obina, Takashi*; Kawamura, Masato*; Kumada, Hiroaki*; et al.
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1244 - 1246, 2016/11
The proton linac installed in the Ibaraki Neutron Medical Research Center is used for production of the intense neutron flux for the Boron Neutron Capture Therapy (BNCT). The linac consists of the 3-MeV RFQ and the 8-MeV DTL. Design average beam current is 10mA. Target is made of Beryllium. First neutron production from the Beryllium target was observed at the end of 2015 with the low intensity beam as a demonstration. After the observation of neutron production, a lot of improvement s was carried out in order to increase the proton beam intensity for the real beam commissioning. The beam commissioning has been started on May 2016. The status of the commissioning is summarized in this report.
SGo, Shintaro*; Ideguchi, Eiji*; Yokoyama, Rin*; Kobayashi, Motoki*; Kisamori, Keiichi*; Takaki, Motonobu*; Miya, Hiroyuki*; Ota, Shinsuke*; Michimasa, Shinichiro*; Shimoura, Susumu*; et al.
JPS Conference Proceedings (Internet), 6, p.030005_1 - 030005_4, 2015/06
Kondo, Yasuhiro; Morishita, Takatoshi; Yamazaki, Saishun; Hori, Toshihiko; Sawabe, Yuki; Chishiro, Etsuji; Fukuda, Shimpei; Hasegawa, Kazuo; Hirano, Koichiro; Kikuzawa, Nobuhiro; et al.
Physical Review Special Topics; Accelerators and Beams, 17(12), p.120101_1 - 120101_8, 2014/12
Times Cited Count：6 Percentile：42.73(Physics, Nuclear)We performed a beam test of a new radio frequency quadrupole linac (RFQ III) for the beam current upgrade of the Japan Proton Accelerator Research Complex. First, the conditioning of RFQ III was conducted, and after 20 h of conditioning, RFQ III became very stable with a nominal peak power and duty factor of 400 kW and 1.5%, respectively. An off-line beam test was subsequently conducted before installation in the accelerator tunnel. The transmission, transverse emittance, and energy spread of the 50-mA negative hydrogen beam from RFQ III were measured and compared with simulation results. The experiment and simulation results showed good agreement; therefore, we conclude that the performance of RFQ III conforms to its design.
Kondo, Yasuhiro; Morishita, Takatoshi; Yamazaki, Saishun; Hori, Toshihiko; Sawabe, Yuki; Takagi, Akira*
Proceedings of 27th International Linear Accelerator Conference (LINAC 2014) (Internet), p.267 - 269, 2014/12
We performed a beam test of a new 324-MHz 3-MeV H RFQ (RFQ III) for the beam-current upgrade of the J-PARC linac. RFQ III is the first RFQ developed to meet the requirement of the J-PARC linac. The peak beam current is 50 mA, pulse length is 500 micro-sec, and the repetition is 25 Hz. Prior to the installation to the accelerator tunnel in summer of 2014, we constructed a test stand for off line testing of the new ion source and RFQ. Basic performances of RFQ III such as transmission and emittances were measured. In this paper, the beam test results are presented.
Oguri, Hidetomo; Hasegawa, Kazuo; Ito, Takashi; Chishiro, Etsuji; Hirano, Koichiro; Morishita, Takatoshi; Shinozaki, Shinichi; Ao, Hiroyuki; Okoshi, Kiyonori; Kondo, Yasuhiro; et al.
Proceedings of 11th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.389 - 393, 2014/10
no abstracts in English
Uchida, Shunsuke*; Wada, Yoichi*; Yamamoto, Seiji*; Takagi, Junichi*; Hisamune, Kenji*
Journal of Nuclear Science and Technology, 51(1), p.24 - 36, 2014/01
Times Cited Count：9 Percentile：57.01(Nuclear Science & Technology)ECP in the BWR primary cooling system can be measured only in the restricted region. In order to determine ECP at any location, ECP should be evaluated by computer simulation codes consisting of water radiolysis models to determine the concentrations of corrosive radiolytic species and mixed potential models to determine ECP based on corrosive species. Mitigation of SCC crack growth rate due to decreasing ECP can be authorized by the JSME Standards, while mitigation of ECP due to hydrogen addition has not been authorized yet. In the paper, standard procedures to authorize the computer simulation codes based on the verification and validation method are proposed. The numerical justification of every code applied as a standard code should be verified and its accuracy and applicability for plant analysis should be validated. Benchmark problems for verification processes are proposed and comparison of the calculated results with the measured ones for the plant of evaluation is required.
Harigae, Hitoshi; Takagi, Tsuyohiko; Hamano, Tomoharu; Nakamura, Shoichi; Oba, Toshio; Ebashi, Masaaki; Okuda, Eiichi; Kinoshita, Tomonobu
JAEA-Technology 2013-014, 150 Pages, 2013/07
JAEA-Technology-2013-014.pdf:24.38MB
In-Vessel Transfer Machine (IVTM) came off from the gripper claw in the Auxiliary Handling Machine (AHM) and fell at a height of approximately two meters during a withdrawal work of the IVTM in the Fast Breeder Reactor (FBR) Monju. The withdrawal work of IVTM from the reactor vessel by AHM was performed. The work, however, was suspended due to the excessive load alarm. To grasp the situation of the IVTM fall, observation of the machine was necessary. An interior observation and an exterior observation of the dropped IVTM were performed. As a result of these observations, the radially deformed lower end of the upper guide tube was observed at the connection part, and it was jammed in the fuel throat sleeve when the dropped IVTM was withdrawn. Based on this information, the IVTM could be safely withdrawn from the reactor vessel with the fuel throat sleeve.
Park, J.; Enomoto, Kazuyuki; Yamashita, Takashi*; Takagi, Yasuyuki*; Todaka, Katsunori*; Maekawa, Yasunari
Journal of Membrane Science, 438, p.1 - 7, 2013/07
Times Cited Count：15 Percentile：45.37(Engineering, Chemical)Alicyclic polyimides (APIs) were successfully applied to radiation-induced graft polymerization for developing polymer electrolyte membranes for fuel cells. The grafting into fully aromatized polyimide barely proceeded (grafting degrees (GDs) of less than 5%), whereas that of styrene into the API films proceeded with styrene GDs of up to 70%. In combination of electron spin resonance measurements and ultraviolet-visible (UV-VIS) spectroscopy, the radical species was identified as a long-lived intermediate and 10% of the radicals were consumed as grafting initiators. The moderate reaction conditions allowed for selective sulfonation on the polystyrene grafts, and not on the API substrates, to give API-based polymer electrolyte membranes (PEMs) with ion exchange capacities (IEC) of 1.7-2.8 mmol/g. The PEMs exhibited appropriate proton conductivity and low water uptake, together with excellent mechanical properties, compared with conventional PEMs such as Nafion.
Hirayama, Hideo*; Nakashima, Hiroshi; Sanami, Toshiya*; Yamaguchi, Yasuhiro; Sato, Osamu*; Takagi, Shunji*; Suzuki, Toshikazu*; Iwai, Satoshi*
Nihon Genshiryoku Gakkai-Shi ATOMO
, 55(2), p.83 - 96, 2013/02
Since the accident at the Fukushima Daiichi Power Plant, units of radiation doses such as Sv have been frequently reported by newspapers. However, it is not exactly understood even by experts on nuclear engineering that there are two different concepts which are the protection quantity such as the effective dose related to a radiation health risk and the practical quantity such as ambient dose equivalents related to measurements. In this special issue, Radiological Protection Quantity, and Operational Quantity and Radiological Protection Quantity, explain the radiation protection dose system including the protection and practical quantities established by ICRP and ICRU. Relation between Dosimeters used at Fukushima etc. and Radiological Protection Quantity describes a method and its problems to measure radiations from Cs on surface and underground using survey meters and personal dosimeters, and convert the measured values to effective doses.
