Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Iwatsuki, Jin; Terada, Atsuhiko; Noguchi, Hiroki; Ishikura, Shuichi; Takahashi, Toshio*; Hino, Ryutaro
Dai-12-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu, p.285 - 286, 2007/06
The Japan Atomic Energy Agency has been proceeding design works on a pilot test plant of 30Nm/hr-scale hydrogen production by using thermo-chemical water splitting process by iodine and sulfur (IS process) to contribute future hydrogen economy using high-temperature gas-cooled reactors. In parallel to the design works, key engineering issues on corrosion-resistant pipelines and its sealing using dish-type springs were examined under high temperature conditions. This paper introduces experimental results of heat cycle test results of a glass-lining pipe and seal performance using dish-type springs which works as thermal expansion absorber of bolts.
Takahashi, Toshio*; Terada, Atsuhiko
JAEA-Technology 2006-014, 60 Pages, 2006/03
In the corrosive process environment of thermochemical hydrogen production Iodine-Sulfur process plant, there is a difficulty in the direct measurement of surface temperature of the structural materials. An inverse problem method can effectively be applied for this problem, which enables estimation of the surface temperature using the temperature data at the inside of structural materials. This paper shows analytical results of steady state temperature distributions in a two-dimensional cylindrical system cooled by impinging jet flow, and clarifies necessary order of multiple-valued function from the viewpoint of engineeringly satisfactory precision.
Aso, Tomokazu; Kaminaga, Masanori; Haga, Katsuhiro; Kinoshita, Hidetaka; Takahashi, Toshio*; Hino, Ryutaro
JAERI-Tech 2002-096, 76 Pages, 2002/12
The JAERI and the High Energy Accelerator Research Organization have been developing a Mega-Watt scale spallation target system. In the system, neutrons generated in a target are sorted out their energy to the proper values in liquid-hydrogen moderators. Then, the liquid-hydrogen is forced to circulate in order to suppress hydrogen temperature increase. In the operation of moderators, it is very important to establish a safety protection system against emergency shutdown of the accelerator or accidents of the cold moderator system. In order to obtain a technical data for design and safety review of the liquid-hydrogen system, we have fabricated an experimental apparatus simulated the cold moderator system using liquid nitrogen (max. 1.5MPa, mini. 77K) instead of liquid hydrogen. The experiments on a controllability of the system were carried out to investigate dynamic characteristics of the system. This report presents the experimental results and technical issues for the construction of a practical liquid-hydrogen moderator system of the Mega-Watt scale target system.
Kaminaga, Masanori; Haga, Katsuhiro; Aso, Tomokazu; Kinoshita, Hidetaka; Kogawa, Hiroyuki; Ishikura, Shuichi*; Terada, Atsuhiko*; Kobayashi, Kaoru*; Adachi, Junichi*; Teraoku, Takuji*; et al.
Proceedings of American Nuclear Society Conference "Nuclear Applications in the New Millennium" (AccApp-ADTTA '01) (CD-ROM), 9 Pages, 2002/00
no abstracts in English
Sakaba, Nariaki; Homma, Hiroyuki; Takahashi, Toshio*; Kasahara, Seiji; Ohashi, Hirofumi; Nishihara, Tetsuo; Onuki, Kaoru; Kunitomi, Kazuhiko
no journal, ,
no abstracts in English
Takemoto, Jumpei; Yoshino, Koji; Kubo, Shinji; Kasahara, Seiji; Takahashi, Toshio*; Hino, Ryutaro
no journal, ,
no abstracts in English
Takemoto, Jumpei; Yoshino, Koji*; Imai, Yoshiyuki; Kubo, Shinji; Kasahara, Seiji; Takahashi, Toshio*; Hino, Ryutaro
no journal, ,
no abstracts in English