Benchmark analysis of ductile fracture simulation for circumferentially cracked pipes subjected to bending

Kumagai, Tomohisa*; Miura, Yasufumi*; Miura, Naoki*; Marie, S.*; Almahdi, R.*; Mano, Akihiro; Li, Y.; Katsuyama, Jinya; Wada, Yoshitaka*; Hwang, J.-H.*; et al.

Journal of Pressure Vessel Technology, 144(1), p.011509_1 - 011509_18, 2022/02

https://doi.org/10.1115/1.4052852

To predict fracture behavior for ductile materials, some ductile fracture simulation methods different from classical approaches have been investigated based on appropriate models of ductile fracture. For the future use of the methods to overcome restrictions of classical approaches, the applicability to the actual components is of concern. In this study, two benchmark problems on the fracture tests supposing actual components were provided to investigate prediction ability of simulation methods containing parameter decisions. One was the circumferentially through-wall and surface cracked pipes subjected to monotonic bending, and the other was the circumferentially through-wall cracked pipes subjected to cyclic bending. Participants predicted the ductile crack propagation behavior by their own approaches, including FEM employed GTN yielding function with void ratio criterion, are FEM employed GTN yielding function, FEM with fracture strain or energy criterion modified by stress triaxiality, XFEM with J or delta J criterion, FEM with stress triaxiality and plastic strain based ductile crack propagation using FEM, and elastic-plastic peridynamics. Both the deformation and the crack propagation behaviors for monotonic bending were well reproduced, while few participants reproduced those for cyclic bending. To reproduce pipe deformation and fracture behaviors, most of groups needed parameters which were determined toreproduce pipe deformation and fracture behaviors in benchmark problems themselves and it is still difficult to reproduce them by using parameters only from basic materials tests.

Development of next-generation timing system for the Japan Proton Accelerator Research Complex

Tamura, Fumihiko; Takahashi, Hiroki; Kamikubota, Norihiko*; Ito, Yuichi*; Hayashi, Naoki

IEEE Transactions on Nuclear Science, 68(8), p.2043 - 2050, 2021/08

https://doi.org/10.1109/TNS.2021.3083791

A precise and stable timing system is necessary for high intensity proton accelerators such as the J-PARC. The existing timing system, which was developed during the construction period of the-PARC, has been working without major issues since 2006. After a decade of operation, the optical modules, which are key components for signal transfer, were discontinued already. Thus, the next-generation timing system for the J-PARC is under development. The new system is designed to be compatible with the existing system in terms of the operating principle. The new system utilizes modern high speed signal communication for the transfer of the clock, trigger, and type code. We present the system configuration of the next-generation timing system and current status.

Next generation timing system for J-PARC

Tamura, Fumihiko; Takahashi, Hiroki; Kamikubota, Norihiko*; Ito, Yuichi; Hayashi, Naoki

Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.149 - 152, 2019/07

https://www.pasj.jp/web_publish/pasj2019/proceedings/PDF/THOI/THOI08.pdf

Precise timing pulses from the timing system are necessary for acceleration of high intensity proton beams in the J-PARC accelerators. The existing timing system was developed during the construction period of the J-PARC. The system has been working well for more than ten years, however, the optical modules for the signal transfer from the central control building to the accelerators are discontinued already. Although we have spares of the optical devices, maintenance of the system will be difficult. Therefore, we are developing the next generation timing system for the J-PARC. We present the design of the system, preliminary test results, and future plans.

Study on use of superconducting magnet and first inelastic neutron scattering experiment under magnetic field at 4SEASONS spectrometer

Kajimoto, Ryoichi; Ishikado, Motoyuki*; Kira, Hiroshi*; Kaneko, Koji; Nakamura, Mitsutaka; Kamazawa, Kazuya*; Inamura, Yasuhiro; Ikeuchi, Kazuhiko*; Iida, Kazuki*; Murai, Naoki; et al.

Physica B; Condensed Matter, 556, p.26 - 30, 2019/03

BB2018-0570.pdf:2.17MB

https://doi.org/10.1016/j.physb.2018.11.065

Stabilization of timing system operation of J-PARC Linac and RCS

Takahashi, Hiroki; Hayashi, Naoki; Ito, Yuichi*; Kawase, Masato*; Sawabe, Yuki*

Proceedings of 8th International Particle Accelerator Conference (IPAC '17) (Internet), p.4000 - 4002, 2017/06

https://doi.org/10.18429/JACoW-IPAC2017-THPAB118

The timing system data (delay value, status, etc.) of J-PARC Linac and rapid cycling synchrotron is managed by a computer. After updating this hardware, we encountered the problem of data corruption in the timing system. Therefore, we added a function to the software for the timing system VME and investigated the cause of the problem. The investigation results showed a problem with the network connected PCI-Express reflective memory. We implemented measures for stabilizing the timing system operation based on this result.

Development of a control system at a 3 MeV linac in J-PARC

Sawabe, Yuki*; Ishiyama, Tatsuya; Takahashi, Daisuke; Kato, Yuko; Suzuki, Takahiro*; Hirano, Koichiro; Takei, Hayanori; Meigo, Shinichiro; Kikuzawa, Nobuhiro; Hayashi, Naoki

Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.647 - 651, 2016/11

http://www.pasj.jp/web_publish/pasj2016/proceedings/PDF/MOP0/MOP096.pdf

In the J-PARC, a 3 MeV linac has been developed for the tests of beam scraper irradiation and charge exchange by high-power laser. To accomplish tests efficiently and safely, the control system for 3 MeV was designed and developed, and this system consists of four subsystems, personal protection system, machine protection system, timing system, and remote control system using the EPICS. In this paper, the details of control system for a 3 MeV linac are presented.

Inter-atomic force constants of BaF by diffuse neutron scattering measurement

Sakuma, Takashi*; Makhsun*; Sakai, Ryutaro*; Xianglian*; Takahashi, Haruyuki*; Basar, K.*; Igawa, Naoki; Danilkin, S. A.*

AIP Conference Proceedings 1656, p.020002_1 - 020002_4, 2015/04

https://doi.org/10.1063/1.4917089

Diffuse neutron scattering measurement on BaF crystals was performed at 10 K and 295 K. Oscillatory form in the diffuse scattering intensity of BaF was observed at 295 K. The correlation effects among thermal displacements of F-F atoms were obtained from the analysis of oscillatory diffuse scattering intensity. From the values of correlation effects and Debye-Waller temperature parameters, force constants among the first and second nearest neighboring atoms of BaF, were determined to be 4.40 and 2.30 eV/ at 295 K, respectively

Lanthanides (Eu and Gd)-Mssbauer spectroscopic study of defect-fluorite oxides coupled with new defect crystal chemistry model

Nakamura, Akio; Igawa, Naoki; Okamoto, Yoshihiro; Hinatsu, Yukio*; Wang, J.*; Takahashi, Masashi*; Takeda, Masuo*

Mssbauer Spectroscopy; Applications in Chemistry, Biology, and Nanotechnology, p.71 - 94, 2013/10

https://doi.org/10.1002/9781118714614.ch04

Inter-atomic force constants of AgO from diffuse neutron scattering measurement

Wada, Tamotsu*; Sakuma, Takashi*; Sakai, Ryutaro*; Uehara, Hiroyuki*; Xianglian*; Takahashi, Haruyuki*; Kamishima, Osamu*; Igawa, Naoki; Danilkin, S. A.*

Solid State Ionics, 225, p.18 - 21, 2012/10

https://doi.org/10.1016/j.ssi.2012.02.007

Diffuse neutron scattering measurement on AgO crystals was performed at 8 K and 295 K. The observed diffuse scattering intensities were analyzed by including the correlation effects among thermal displacements of atoms in AgO. Using the values of correlation effects among neighboring atoms and the values of Debye-Waller temperature parameter, force constants among first, second and third nearest neighboring atoms have been evaluated.

Beam position monitor system of J-PARC RCS

Hayashi, Naoki; Kawase, Masato; Hatakeyama, Shuichiro; Hiroki, Seiji; Saeki, Riuji; Takahashi, Hiroki; Teruyama, Yuzo*; Toyokawa, Ryoji*; Arakawa, Dai*; Hiramatsu, Shigenori*; et al.

Nuclear Instruments and Methods in Physics Research A, 677, p.94 - 106, 2012/06

https://doi.org/10.1016/j.nima.2012.02.013

A beam position monitor (BPM) system at J-PARC RCS is described. The J-PARC RCS is a rapid-cycling proton synchrotron and its designed beam power is 1 MW. A diameter of the BPM detector is larger than 250 mm, however the system has to measure the beam position very accurately. The system should work not only for the high intensity but also for lower intensity. There are 54 BPM around the ring and most of them are placed inside steering magnets because of quite limited space. The BPM detector is an electro static type and it has four electrodes, and a pair of electrode gives a good linear response with diagonal cut shape to detect the charge center precisely. The signal processing unit, which is equipped with 14-bit 40 MSPS ADC and 600 MHz DSP, has been developed. They are controlled via shared memory space and EPICS. It is capable to record full 25 Hz pulse data for averaged mode and it could also store whole waveform data for further analysis, like turn-by-turn position calculation.