Development of nondestructive elemental analysis system for Hayabusa2 samples using muonic X-rays

Osawa, Takahito; Nagasawa, Shunsaku*; Ninomiya, Kazuhiko*; Takahashi, Tadayuki*; Nakamura, Tomoki*; Wada, Taiga*; Taniguchi, Akihiro*; Umegaki, Izumi*; Kubo, Kenya*; Terada, Kentaro*; et al.

ACS Earth and Space Chemistry (Internet), 7(4), p.699 - 711, 2023/04

https://doi.org/10.1021/acsearthspacechem.2c00303

The concentrations of carbon and other major elements in asteroid samples provide very important information on the birth of life on the Earth and the solar-system evolution. Elemental analysis using muonic X-rays is one of the best analytical methods to determine the elemental composition of solid materials, and notably, is the only method to determine the concentration of light elements in bulk samples in a non-destructive manner. We developed a new analysis system using muonic X-rays to measure the concentrations of carbon and other major elements in precious and expectedly tiny samples recovered from the asteroid Ryugu by spacecraft Hayabusa2. Here we report the development process of the system in 4 stages and their system configurations, The analysis system is composed of a stainless-steel analysis chamber, an acrylic glove box for manipulating asteroid samples in a clean environment, and Ge semiconductor detectors arranged to surround the analysis chamber. The performance of the analysis system, including the background level, which is crucial for the measurement, was greatly improved from the first stage to the later ones. Our feasibility study showed that the latest model of our muonic X-ray analysis system is capable of determining the carbon concentration in Hayabusa2's sample model with an uncertainty of less than 10 percent in a 6-day measurement.

Reducing the effect of noise generated from stepper motor for H0 collimator in J-PARC RCS

Fujiyama, Hiroki*; Takahashi, Hiroki; Okabe, Kota; Ito, Yuichi*; Hatakeyama, Shuichiro; Suzuki, Takahiro*; Otsu, Satoru*; Yamakawa, Ryuto*

Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.529 - 531, 2023/01

http://www.pasj.jp/web_publish/pasj2022/proceedings/PDF/WEP0/WEP010.pdf

Stepper motors are used for mechanical drive in collimators and wire scanner monitors of J-PARC accelerators. Many of these drive unit hardware have been used since the beginning of J-PARC construction, and it is necessary to take measures against aging deterioration. Therefore, we started updating the motor and control system from around 2017. However, when the stepper motor was updated to the current product in the RCS H0 collimator, a malfunction occurred. This is because the drive unit control system cannot correctly recognize the state of the LS (limit switch) due to the noise generated by the motor driver, which hinders the operation. When the noise generated from the old and new stepper motors was measured in a simple test environment for confirmation, it was found that the current product was clearly larger. As a countermeasure, when the wiring of the stepper motor, which was bundled in a single multi-core cable, was separated into separate cables for the power system and LS signal system, the noise level was reduced to about 1/10 and normal operation was restored. I was able to. In this case, we report on noise countermeasures for the RCS H0 collimator drive unit.

Dynamical response of transition-edge sensor microcalorimeters to a pulsed charged-particle beam

Okumura, Takuma*; Azuma, Toshiyuki*; Bennet, D. A.*; Caradonna, P.*; Chiu, I.-H.*; Doriese, W. B.*; Durkin, M. S.*; Fowler, J. W.*; Gard, J. D.*; Hashimoto, Tadashi; et al.

IEEE Transactions on Applied Superconductivity, 31(5), p.2101704_1 - 2101704_4, 2021/08

https://doi.org/10.1109/TASC.2021.3067793

A superconducting transition-edge sensor (TES) microcalorimeter is an ideal X-ray detector for experiments at accelerator facilities because of good energy resolution and high efficiency. To study the performance of the TES detector with a high-intensity pulsed charged-particle beam, we measured X-ray spectra with a pulsed muon beam at the Japan Proton Accelerator Research Complex (J-PARC) in Japan. We found substantial temporal shifts of the X-ray energy correlated with the arrival time of the pulsed muon beam, which was reasonably explained by pulse pileup due to the incidence of energetic particles from the initial pulsed beam.

Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

https://doi.org/10.1038/s41550-020-01271-2

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.

Simple pretreatment method for tritium measurement in environmental water samples using a liquid scintillation counter

Nakasone, Shunya*; Yokoyama, Sumi*; Takahashi, Tomoyuki*; Ota, Masakazu; Kakiuchi, Hideki*; Sugihara, Shinji*; Hirao, Shigekazu*; Momoshima, Noriyuki*; Tamari, Toshiya*; Shima, Nagayoshi*; et al.

Plasma and Fusion Research (Internet), 16, p.2405035_1 - 2405035_5, 2021/02

https://doi.org/10.1585/pfr.16.2405035

Removal of impurities such as organic and other types of dissolved matters from environmental water samples is required for precise analysis of tritium with a liquid scintillation counting method. In general, a distillation method is a conventional one for tritium analysis in environmental water samples, but is a time-consuming process that takes 24 hours for removal of impurities. We have proposed a rapid pretreatment method for tritium analysis, that uses ion exchange resins. In this study, we performed batch experiments, to evaluate the effectiveness of the ion exchange resins on the tritium measurement. The results obtained demonstrated that removal of impurities in the sample water by ion exchange resins can be achieved during a short period of time (i.e., in 5 min).

Preliminary investigation of pretreatment methods for liquid scintillation measurements of environmental water samples using ion exchange resins

Nakasone, Shunya*; Yokoyama, Sumi*; Takahashi, Tomoyuki*; Ota, Masakazu; Kakiuchi, Hideki*; Sugihara, Shinji*; Hirao, Shigekazu*; Momoshima, Noriyuki*; Tamari, Toshiya*; Shima, Nagayoshi*; et al.

Plasma and Fusion Research (Internet), 15, p.2405027_1 - 2405027_3, 2020/05

https://doi.org/10.1585/pfr.15.2405027

A quick preprocessing system for tritium analysis of environmental samples is important to judge environmental influence of tritium releases due to accident or tritium-handling facilities. Analysis of tritium in water samples with liquid scintillation counting method requires removal of impurities such as organic matter and ion species from water samples. Generally, a distillation method is adopted as a pretreatment of analysis for tritium; however, the distillation method is a time-consuming process. The aim of this study is to evaluate a rapid pretreatment method for tritium analysis with ion exchange resin. From batch and column experiments that used inland water and ion exchange resin, we confirmed removals of impurities of the water sample and that the removal of impurities was possible for a short time (by 5 minutes).

Electrochemical impedance analysis on solid electrolyte oxygen sensor with gas and liquid reference electrodes for liquid LBE

Adhi, P. M.*; Okubo, Nariaki; Komatsu, Atsushi; Kondo, Masatoshi*; Takahashi, Minoru*

Energy Procedia, 131, p.420 - 427, 2017/12

https://doi.org/10.1016/j.egypro.2017.09.472

The ionic conductivity of solid electrolyte may insufficient, and the sensor output signal will deviate from the theoretical one in low temperature. The performance of oxygen sensor with Ag/air reference electrode (RE) and liquid Bi/BiO RE was tested in low-temperature LBE at 300450C and the charge transfer reactions impedance at the electrode-electrolyte interface was analyzed by electrochemical impedance analysis (EIS). After steady state condition, both of the sensors performed well and can be used at 300450C. Bi/Bi/BiO RE has lower impedance than Ag/air RE. Therefore, the response time of the oxygen sensor with Bi/Bi/BiO RE is faster than the oxygen sensor with Ag/air RE in the low-temperature region.

Development status of data acquisition system for IFMIF/EVEDA accelerator

Usami, Hiroki; Takahashi, Hiroki; Komukai, Satoshi*

Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.760 - 763, 2015/09

http://www.pasj.jp/web_publish/pasj2015/proceedings/PDF/WEP1/WEP101.pdf

EU and JAEA are advancing development of Linear IFMIF Prototype Accelerator (LIPAc) control system jointly, but JAEA keeps developing central control system (CCS) mainly. Data transfer during an equipment control system of CCS and EU is performed through EPICS. JAEA is using PostgreSQL as 1 of development elements in CCS and is advancing development of the system to record the whole EPICS data of LIPAc (the data acquisition system). On the other hand, a data acquisition is performed using BEAUTY (Best Ever Archive Toolset, yet) in an element test of equipment at Europe. Therefore "1 client refers to collected data by more than one server machine" with "compatibility securement of data with BEAUTY" in case of development of the data acquisition system of CCS, and, it's necessary to consider "To do a data acquisition and backup work at the same time". For the moment, former 2 are in progress. And a demonstration of the data acquisition system is being performed simultaneously with commissioning in injector. The data acquisition system is collecting data of injector other ones, and the data reference by a monitor with CSS (Control System Studio) is also possible. We will report on the current state of the development of the data acquisition system by making reference to a result of the test by injector commissioning.

The Possible interplanetary transfer of microbes; Assessing the viability of spp. under the ISS environmental conditions for performing exposure experiments of microbes in the Tanpopo mission

Kawaguchi, Yuko*; Yang, Y.*; Kawashiri, Narutoshi*; Shiraishi, Keisuke*; Takasu, Masako*; Narumi, Issey*; Sato, Katsuya; Hashimoto, Hirofumi*; Nakagawa, Kazumichi*; Tanigawa, Yoshiaki*; et al.

Origins of Life and Evolution of Biospheres, 43(4-5), p.411 - 428, 2013/10

https://doi.org/10.1007/s11084-013-9346-1

Development status of data acquisition system for LIPAc

Takahashi, Hiroki; Kojima, Toshiyuki; Narita, Takahiro; Sakaki, Hironao; Komukai, Satoshi*

Proceedings of 3rd International Particle Accelerator Conference (IPAC '12) (Internet), p.3972 - 3974, 2012/07

http://accelconf.web.cern.ch/accelconf/IPAC2012/papers/thppr004.pdf

Control System for LIPAc realizes the remote control and monitoring and data acquisition by use of EPICS. For the validations of each subsystem performance and the activity of IFMIF Accelerator design, it is very important data obtained by commissioning of LIPAc and each subsystem. To certainly archive the important data for LIPAc and to efficiently search the LIPAc data, for design and validation, we started developing Data Acquisition System (DAC) based on Relational Database (RDB) has been developed. The first design for DAC of LIPAc is configured (1) using PostgreSQL for RDB and (2) several RDB for data archiving to ensure the data archive performance and to consider the increasing data amount. In addition, (3) only one RDB for data search is included in DAC and users can search the data via this RDB. In this way, several RDB for DAC can behave only one RDB against users. In this article, the development status of DAC for LIPAc is presented.