Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.
Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07
This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.
Sasa, Kimikazu*; Honda, Maki; Hosoya, Seiji*; Takahashi, Tsutomu*; Takano, Kenta*; Ochiai, Yuta*; Sakaguchi, Aya*; Kurita, Saori*; Satou, Yukihiko; Sueki, Keisuke*
Journal of Nuclear Science and Technology, 58(1), p.72 - 79, 2021/01
Times Cited Count:8 Percentile:72.51(Nuclear Science & Technology)Ota, Yuki*; Sueki, Keisuke*; Sasa, Kimikazu*; Takahashi, Tsutomu*; Matsunaka, Tetsuya*; Matsumura, Masumi*; Tosaki, Yuki*; Honda, Maki*; Hosoya, Seiji*; Takano, Kenta*; et al.
JAEA-Conf 2018-002, p.99 - 102, 2019/02
no abstracts in English
Miura, Kenta*; Sato, Takahiro; Ishii, Yasuyuki; Koka, Masashi; Kiryu, Hiromu*; Ozawa, Yusuke*; Takano, Katsuyoshi*; Okubo, Takeru; Yamazaki, Akiyoshi; Kada, Wataru; et al.
JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 126, 2013/01
Miura, Kenta*; Sato, Takahiro; Ishii, Yasuyuki; Kiryu, Hiromu*; Ozawa, Yusuke*; Koka, Masashi; Takano, Katsuyoshi*; Okubo, Takeru; Yamazaki, Akiyoshi; Kada, Wataru; et al.
Key Engineering Materials, 534, p.158 - 161, 2013/00
Times Cited Count:5 Percentile:89.92Miura, Kenta*; Sato, Takahiro; Ishii, Yasuyuki; Koka, Masashi; Uehara, Masato*; Kiryu, Hiromu*; Takano, Katsuyoshi*; Okubo, Takeru; Yamazaki, Akiyoshi; Kada, Wataru; et al.
JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 126, 2012/01
Miura, Kenta*; Machida, Yuki*; Uehara, Masato*; Kiryu, Hiromu*; Ozawa, Yusuke*; Sasaki, Tomoyuki*; Hanaizumi, Osamu*; Sato, Takahiro; Ishii, Yasuyuki; Koka, Masashi; et al.
Key Engineering Materials, 497, p.147 - 150, 2012/00
Times Cited Count:7 Percentile:95.17Miura, Kenta*; Machida, Yuki*; Uehara, Masato*; Kiryu, Hiromu*; Ozawa, Yusuke*; Sasaki, Tomoyuki*; Hanaizumi, Osamu*; Sato, Takahiro; Ishii, Yasuyuki; Koka, Masashi; et al.
Key Engineering Materials, 497, p.147 - 150, 2011/12
Times Cited Count:6 Percentile:2.48Sudo, Katsuo; Takano, Tatsuo; Takeuchi, Kentaro; Kihara, Yoshiyuki; Kato, Masato
Proceedings of International Conference on Toward and Over the Fukushima Daiichi Accident (GLOBAL 2011) (CD-ROM), 5 Pages, 2011/12
Japan Atomic Energy Agency has been contracted to advance the Fast Reactor Cycle Technology Development project. As one part of the project, a simplified MOX pellet fabrication method has been developed for fast reactor fuels. In previous reports, feasibility of a simplified MOX pellet fabrication method was confirmed through hot and cold laboratory-scale experiments. The die wall lubrication pressing technology was one of the important technologies included in the development of the simplified MOX pellet fabrication method. In the work described here, a pressing machine with a die wall lubrication system was developed, and MOX pellet fabrication experiments were carried out on the kilogram MOX scale.
Takano, Tatsuo; Sudo, Katsuo; Takeuchi, Kentaro; Kihara, Yoshiyuki; Kato, Masato
Proceedings of International Conference on Toward and Over the Fukushima Daiichi Accident (GLOBAL 2011) (CD-ROM), 7 Pages, 2011/12
Development of high burn-up fuels is essential to improve economy of the fast reactor fuel cycle. Increase of fuel burn-up is known to cause fuel-cladding chemical interaction (FCCI) and it mainly determines a lifetime of fuel pin. In order to extend a lifetime of fuel pin by mitigating FCCI, development of low oxygen-to-metal (O/M) MOX fuel has been carried out in plutonium fuel development center of JAEA. MOX fuel needs adjustment of the O/M ratio to less than 1.97 for high burn-up of 150 GWd/t. Therefore, O/M adjustment technology is one of the main subjects in development of a simplified MOX pellet fabrication method which has been advanced in the FaCT (Fast reactor Cycle Technology development) project. In previous work, changes in O/M ratio of MOX pellet during heat treatment were calculated from measurement results of oxygen potentials. On the basis of above calculation, heating tests were carried out to prepare low O/M ratio MOX pellets on a laboratory scale. The O/M ratios obtained in the heating tests were well consistent with calculation results. In the present study, a kilogram MOX scale furnace to adjust O/M ratio of MOX pellets for targeted value has been developed as next step.
Hirooka, Shun; Kato, Masato; Takeuchi, Kentaro; Takano, Tatsuo
Proceedings of International Conference on Toward and Over the Fukushima Daiichi Accident (GLOBAL 2011) (CD-ROM), 6 Pages, 2011/12
In this work, the shrinkage behavior and O/M change of MOX pellet during sintering process were investigated with dilatometer and thermo-gravimeter, and equations to analyze the sintering behavior were derived. The derived equations represented the change of density and O/M ratio of MOX pellet during heat treatment as functions of heat treatment conditions such as heating rate, holding temperature and / ratio in an atmosphere. They contribute the development of advanced pellet production process and would accurately control density and O/M ratio of MOX pellets.
Saito, Yasuo; Takano, Masato; Tanaka, Kenji; Kobayashi, Kentaro; Otani, Yoshikuni
Proceedings of International Symposium on Radiation Safety Management 2007 (ISRSM 2007), p.275 - 280, 2007/11
The Low-radioactive Waste Treatment Facility (LWTF), which aims to provide the safe, efficient and economic treatment and disposal of Low-level Liquid Waste (LLW) generated from LWR spent fuel reprocessing, was constructed at the Tokai Reprocessing Plant (TRP), and a cold test is now being carried out. New treatment processes such as a removal process for radio-nuclides and the ROBE (BORSAURE EINENGUNG ANLAGE) solidification process are being implemented in the LWTF. In order to treat the large amount of sodium nitrate contained in the concentrated LLW with higher safety and economy, R&D work on nitrate-ion decomposition technology using a catalytic reduction method and on the solidification process by cementation is being undertaken. The results of this R&D will be adopted in the LWTF in the near future. This report describes an outline of liquid waste treatment in the LWTF and new treatment technologies for LLW to achieve safe, efficient and economic treatment and disposal.
Nagata, Shinji*; Inoue, Aichi; Yamamoto, Shunya; Tsuchiya, Bun*; Takano, Katsuyoshi; To, Kentaro*; Shikama, Tatsuo*
Journal of Alloys and Compounds, 446-447, p.558 - 561, 2007/10
Times Cited Count:20 Percentile:69.97(Chemistry, Physical)The effect of the composition of non-stoichiometric WO films on the gasochromic coloration are investigated. The films are prepared by a reactive RF magnetron sputtering with varying oxygen partial pressure. To determine the quantitative composition of deposited films, Rutherford backscattering spectroscopy (RBS) and Elastic recoil detection (ERD) are employed. Gasochromic coloration of the films coated with Pd catalyst is examined by optical transmission in hydrogen gas. O/W atomic ratio of the films increases from 0.25 to 3.0 with increasing the oxygen partial pressure in the sputtering gas. H/W ratio increases up to 0.7 with increasing the O/W ration. As regards gasochromic coloration, the film with O/W atomic ratio of 3.0 shows superior coloration performance comparing with that of less than 3.0. Therefore, it is assumed that the good gasochromic coloration of tungsten oxide films is realized by near-stoichiometric WO. In addition, gasochromic coloration state, increasing of hydrogen concentration in WO films is observed. It indicates that gasochromic coloration of WO is relate to formation of HWO structure.
Nagata, Shinji*; Yamamoto, Shunya; Inoue, Aichi; Tsuchiya, Bun*; To, Kentaro*; Takano, Katsuyoshi; Yoshikawa, Masahito; Shikama, Tatsuo*
JAEA-Review 2006-042, JAEA Takasaki Annual Report 2005, P. 148, 2007/02
no abstracts in English
Suzuki, Takuya*; Takano, Hidekazu*; Takeuchi, Akihisa*; Uesugi, Kentaro*; Asaoka, Hidehito; Suzuki, Yoshio*
Advances in X-Ray Chemical Analysis, Japan, 36, p.249 - 257, 2005/03
no abstracts in English
Nagata, Shinji*; Inoue, Aichi; To, Kentaro*; Tsuchiya, Bun*; Shikama, Tatsuo*; Yamamoto, Shunya; Takano, Katsuyoshi; Yoshikawa, Masahito
no journal, ,
no abstracts in English
Nagata, Shinji*; To, Kentaro*; Tsuchiya, Bun*; Shikama, Tatsuo*; Yamamoto, Shunya; Takano, Katsuyoshi; Inoue, Aichi
no journal, ,
no abstracts in English
Nagata, Shinji*; Tsuchiya, Bun*; To, Kentaro*; Shikama, Tatsuo*; Inoue, Aichi; Yamamoto, Shunya; Takano, Katsuyoshi
no journal, ,
no abstracts in English
Miura, Kenta*; Tanemura, Tsuyoshi*; Hanaizumi, Osamu*; Yamamoto, Shunya; Takano, Katsuyoshi; Sugimoto, Masaki; Yoshikawa, Masahito
no journal, ,
no abstracts in English
Miura, Kenta*; Tanemura, Tsuyoshi*; Hanaizumi, Osamu*; Yamamoto, Shunya; Takano, Katsuyoshi; Sugimoto, Masaki; Yoshikawa, Masahito
no journal, ,
no abstracts in English