Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
C waterIto, Yuzuru; Saito, Masahiro*; Abe, Katsunori*; Wakai, Eiichi
Journal of Plasma and Fusion Research SERIES, Vol.11, p.73 - 78, 2015/03
Crack growth is a one of the key mechanical properties for the design evaluation in fusion materials to be tested at the High Flux Test Module (HFTM) in IFMIF. In this study, crack growth rate of the F82H steel in the 288C water was investigated by using an almost standard size specimen in order to avoid the specimen size effect on the crack growth. It was found that the typical intergranular fracture surface could be obtained during the crack propagation even at room temperature. Chromium carbide, Cr
C
, precipitation along the grain boundaries in F82H steel may influence the intergranular fracture under the fatigue crack propagation at room temperature in air. The possible evidence of crack growth in the 288C water was also observed. The crack growth rate at 30 MPa ![$$sqrt[]{m}$$](/search/images/EROHG2LSORNV041NPUSA.gif)
in the 288C water was conservatively estimated to about 7
10
m/s. Further systematic study of crack growth, and the improvement of surface finishing against crack propagation are necessary for the design evaluation in fusion materials.
Ito, Yuzuru; Saito, Masahiro*; Abe, Katsunori*; Wakai, Eiichi
Small Specimen Test Techniques; 6th Volume (ASTM STP 1576), p.209 - 224, 2015/00
Wakai, Eiichi; Kim, B. J.; Nozawa, Takashi; Kikuchi, Takayuki; Hirano, Michiko*; Kimura, Akihiko*; Kasada, Ryuta*; Yokomine, Takehiko*; Yoshida, Takahide*; Nogami, Shuhei*; et al.
Proceedings of 24th IAEA Fusion Energy Conference (FEC 2012) (CD-ROM), 6 Pages, 2013/03
Wakai, Eiichi; Kikuchi, Takayuki; Kogawara, Takafumi; Kimura, Haruyuki; Yokomine, Takehiko*; Kimura, Akihiko*; Nogami, Shuhei*; Kurishita, Hiroaki*; Saito, Masahiro*; Nishimura, Arata*; et al.
Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 6 Pages, 2011/03
Japanese activities of test facilities in IFMIF-EVEDA (International Fusion Materials Irradiation Facility-Engineering Validation and Engineering Design Activities) project have three subjects of engineering design of post irradiation examination (PIE) facilities, small specimen test technique (SSTT), and engineering design of high flux test module (HFTM), and this paper is summarized about present status. Functional analysis and design of 2-D and 3-D models of PIE facility were performed. In HFTM, as materials of heater, W-3Re alloy and/or SiC/SiC composite were selected in the points of high temperature materials, fabrication technology and some suitable properties such as resistance of thermal shock, high temperature re-crystallization, ductility, resistance of irradiation degradation, and low-activation. In SSTT, a test machine of fracture toughness was designed and developed for small specimens with 10 mm square, and it had high accuracy controllability for stress and displacement.
Mizuhashi, Kiyoshi; Uno, Sadanori; Okoshi, Kiyonori; Chiba, Atsuya; Yamada, Keisuke; Saito, Yuichi; Ishii, Yasuyuki; Sato, Takahiro; Sakai, Takuro; Yokota, Wataru; et al.
JAEA-Review 2006-042, JAEA Takasaki Annual Report 2005, P. 197, 2007/02
Three electrostatic accelerators were almost operated smoothly for various experiments in FY 2005. The yearly operation time of each accelerator amounts to 1974, 2359.9, 1859.9 hour for the tandem, the single-ended and the ion implanter, respectively. Main trouble was a short circuit of a part of the ion source in the single-ended accelerator. This lets to the suspension of operation for fifteen days. As features in FY 2005, the generation of the power cut by thunderbolts and large earthquakes were abounding. By this natural force, the Turbo-molecular pump was broken, experiment was interrupted and then the inspection of accelerator facility was carried out every time. New beam acceleration and improvement of each accelerator were carried out.
Mizuhashi, Kiyoshi; Uno, Sadanori; Okoshi, Kiyonori; Chiba, Atsuya; Yamada, Keisuke; Saito, Yuichi; Ishii, Yasuyuki; Sakai, Takuro; Sato, Takahiro; Yokota, Wataru; et al.
JAEA-Review 2005-001, TIARA Annual Report 2004, P. 371, 2006/01
no abstracts in English
Mizuhashi, Kiyoshi; Uno, Sadanori; Okoshi, Kiyonori; Chiba, Atsuya; Yamada, Keisuke; Saito, Yuichi; Ishii, Yasuyuki; Sato, Takahiro; Sakai, Takuro; Yokota, Wataru; et al.
no journal, ,
no abstracts in English
Wakai, Eiichi; Kogawara, Takafumi; Kikuchi, Takayuki; Yamamoto, Michiyoshi; Molla, J.*; Kimura, Akihiko*; Kasada, Ryuta*; Kim, B.*; Nogami, Shuhei*; Hasegawa, Akira*; et al.
no journal, ,
no abstracts in English
Wakai, Eiichi; Kondo, Hiroo; Kanemura, Takuji; Hirakawa, Yasushi; Furukawa, Tomohiro; Kikuchi, Takayuki; Ito, Yuzuru*; Hoashi, Eiji*; Yoshihashi, Sachiko*; Horiike, Hiroshi*; et al.
no journal, ,
no abstracts in English
