Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kozawa, Takayuki; Suganuma, Takuro; Homma, Fumitaka; Higashimura, Keisuke*; Ukai, Takayuki*; Saito, Kenji
JAEA-Technology 2023-007, 24 Pages, 2023/06
JAEA-Technology-2023-007.pdf:2.24MB
To improve the reliability of the HTTR wide range monitor in a high-temperature environment, structural changes of the wide range monitor were investigated. It was clear that the structure for directly joins of the MI cable core wire and metal tube instead of the joins with lead wire is the most reliable method with shortest way. From a result of the thermal cycle tests and high temperature endurance tests for a mock-up connecting this connection parts, it was clear that the soundness of the connection part was maintained under the usage conditions of the HTTR.
Nemoto, Takahiro; Arakawa, Ryoki; Kawakami, Satoru; Nagasumi, Satoru; Yokoyama, Keisuke; Watanabe, Masashi; Onishi, Takashi; Kawamoto, Taiki; Furusawa, Takayuki; Inoi, Hiroyuki; et al.
JAEA-Technology 2023-005, 33 Pages, 2023/05
JAEA-Technology-2023-005.pdf:5.25MB
During shut down of the HTTR (High Temperature engineering Test Reactor) RS-14 cycle, an increasing trend of filter differential pressure for the helium gas circulator was observed. In order to investigate this phenomenon, the blower of the primary helium purification system was disassembled and inspected. As a result, it is clear that the silicon oil mist entered into the primary coolant due to the deterioration of the charcoal filter performance. The replacement and further investigation of the filter are planning to prevent the reoccurrence of the same phenomenon in the future.
Hamamoto, Shimpei; Shimizu, Atsushi; Inoi, Hiroyuki; Tochio, Daisuke; Homma, Fumitaka; Sawahata, Hiroaki; Sekita, Kenji; Watanabe, Shuji; Furusawa, Takayuki; Iigaki, Kazuhiko; et al.
Nuclear Engineering and Design, 388, p.111642_1 - 111642_11, 2022/03
Times Cited Count：2 Percentile：53.91(Nuclear Science & Technology)Following the Fukushima Daiichi Nuclear Power Plant accident in 2011, the Japan Atomic Energy Agency adapted High-Temperature engineering Test Reactor (HTTR) to meet the new regulatory requirements that began in December 2013. The safety and seismic classifications of the existing structures, systems, and components were discussed to reflect insights regarding High Temperature Gas-cooled Reactors (HTGRs) that were acquired through various HTTR safety tests. Structures, systems, and components that are subject to protection have been defined, and countermeasures to manage internal and external hazards that affect safety functions have been strengthened. Additionally, measures are in place to control accidents that may cause large amounts of radioactive material to be released, as a beyond design based accident. The Nuclear Regulatory Commission rigorously and appropriately reviewed this approach for compliance with the new regulatory requirements. After nine amendments, the application to modify the HTTR's installation license that was submitted in November 2014 was approved in June 2020. This response shows that facilities can reasonably be designed to meet the enhanced regulatory requirements, if they reflect the characteristics of HTGRs. We believe that we have established a reference for future development of HTGR.
-type La
Eu
CuO
and Nd
CuOAsano, Shun*; Ishii, Kenji*; Matsumura, Daiju; Tsuji, Takuya; Kudo, Kota*; Taniguchi, Takanori*; Saito, Shin*; Sunohara, Toshiki*; Kawamata, Takayuki*; Koike, Yoji*; et al.
Physical Review B, 104(21), p.214504_1 - 214504_7, 2021/12
Times Cited Count：0 Percentile：0(Materials Science, Multidisciplinary)Tochio, Daisuke; Nagasumi, Satoru; Inoi, Hiroyuki; Hamamoto, Shimpei; Ono, Masato; Kobayashi, Shoichi; Uesaka, Takahiro; Watanabe, Shuji; Saito, Kenji
JAEA-Technology 2021-014, 80 Pages, 2021/09
JAEA-Technology-2021-014.pdf:5.87MB
In response to the new regulatory standards established in response to the accident at TEPCO's Fukushima Daiichi Nuclear Power Station in March 2011, measures and impact assessments related to internal flooding at HTTR were carried out. In assessing the impact, considering the characteristics of the high-temperature gas-cooled reactor, flooding due to assumed damage to piping and equipment, flooding due to water discharge from the system installed to prevent the spread of fire, and flooding due to damage to piping and equipment due to an earthquake. The effects of submersion, flooding, and flooding due to steam were evaluated for each of them. The impact of the overflow of liquids containing radioactive materials outside the radiation-controlled area was also evaluated. As a result, it was confirmed that flooding generated at HTTR does not affect the safety function of the reactor facility by taking measures.
Hamamoto, Shimpei; Nemoto, Takahiro; Sekita, Kenji; Saito, Kenji
JAEA-Technology 2015-048, 62 Pages, 2016/03
JAEA-Technology-2015-048.pdf:2.58MB
The decarburization may take place depending on the chemical impurity composition in helium gas used as the primary coolant in High-Temperature Gas-cooled Reactors, and will significantly reduce the strength of the alloy. The ability to remove impurities by a helium purification system was designed according to the predicted generation rate of impurities so as to make the coolant become the carburizing atmosphere. It has been confirmed that the coolant becomes the carburizing atmosphere during the operation period of the High Temperature engineering Test Reactor (HTTR). However, it is necessary to consider changes of generation rates of impurities since lifetime of commercial reactor is longer than the life of the HTTR. To avoid the influence of the change of generation rate, the control of removal efficiency of impurity in the helium purification system was considered in this study. To reform the decarburizing into the carburizing atmosphere, it is effective to increase the H and CO concentration in the coolant helium. By controlling the efficiency of the Cooper Oxide Trap (CuOT), it is possible to increase the H and CO concentrations. Therefore, an experiment was carried out by injecting the gas mixture of H and CO into the existing purification system of HTTR to investigate the dependencies of temperature and impurity concentration on the removal efficiency of CuOT. The experimental results are described as the following, (1) By adjusting the temperature of helium at the CuOT within a range from 110
C to 50C, it is possible to reduce the removal efficiency of H sufficiently. (2) Temperature change of helium gas in the CuOT is sufficiently reduced by the cooler located at the downstream of the CuOT, which does not affect the primary cooling system of HTTR. As the results, the applicability of removal efficiency control of CuOT was verified to improve the decarburizing atmosphere for the actual HTGR system.
Honda, Yuki; Saito, Kenji; Tochio, Daisuke; Aono, Tetsuya; Hirato, Yoji; Kozawa, Takayuki; Nakagawa, Shigeaki
Journal of Nuclear Science and Technology, 51(11-12), p.1387 - 1397, 2014/11
Times Cited Count：1 Percentile：8.88(Nuclear Science & Technology)The operational experiments of the HTTR would be useful for future high-temperature gas-cooled reactors (HTGRs). Main PID control constants of the HTTR are selected with reasonably damped characteristics and without undershoot or overshoot. For utilization the HTGR as a commercial reactor, it should be demonstrated that the HTGR system can supply stable heat to a heat utilization system for the long-term operation. The control characteristics in the long-term high-temperature operation are evaluated by the result of operation performed in 2010. In addition, from a viewpoint of HTGRs with heat utilization system, a future possibility of the experiments for heat utilization design is examined.
Homma, Fumitaka; Hirato, Yoji; Saito, Kenji
JAEA-Technology 2014-010, 64 Pages, 2014/05
JAEA-Technology-2014-010.pdf:35.55MB
After an accident at Fukushima Daiichi Nuclear Plant, the High Temperature Engineering Test Reactor (HTTR) should be kept shut-down till adaptability to the new nuclear safety regulation established by the Nuclear Regulation Authority (NRA) will be confirmed. However, we have to keep the operational ability for the HTTR is indispensable. The operation training for the HTTR using the simulator of light water reactors is not effective. Because the HTTR is the only test reactor in the world and one has many characteristics different from light water reactors. It is an urgent problem to utilize the device which confirms the responsiveness of the control systems for the HTTR (simulator) as a simulator for operation training. This report shows specifications of device, results of simulation and the matter which we should carry out in future.
Shimizu, Atsushi; Kawamoto, Taiki; Tochio, Daisuke; Saito, Kenji; Sawahata, Hiroaki; Homma, Fumitaka; Furusawa, Takayuki; Saikusa, Akio; Takada, Shoji; Shinozaki, Masayuki
Nuclear Engineering and Design, 271, p.499 - 504, 2014/05
Times Cited Count：6 Percentile：42.97(Nuclear Science & Technology)The long term high temperature operation using HTTR was carried out to establish the technical basis of HTGR in the high temperature test operation mode during 50-day since January till March, 2010. It is necessary to demonstrate the stability of plant during long-term operation in order to attain the stable supply of the high temperature heat to the planned heat utilization system of HTTR. Test data obtained in the operation were evaluated for the technical issues which were extracted before the operation. As the results, Stability and reliability of the components and facility was demonstrated by evaluating the heat transfer performance of high temperature components, the performance of pressure control to compensate helium gas leak, the reliability of the dynamic components such as helium gas circulators, the performance of heat-up protection of radiation shielding. Through the operation, the technical basis for the operation and maintenance technology of HTGRs was established.
Shinohara, Masanori; Motegi, Toshihiro; Saito, Kenji; Haga, Hiroyuki; Sasaki, Shinji; Katsuyama, Kozo; Takada, Kiyoshi*; Higashimura, Keisuke*; Fujii, Junichi*; Ukai, Takayuki*; et al.
JAEA-Technology 2012-032, 29 Pages, 2012/11
JAEA-Technology-2012-032.pdf:6.57MB
An event, in which one of WRMs were disabled to detect the neutron flux in the reactor core, occurred during the period of reactor shut down of HTTR in March, 2010. The actual life time of WRM was unexpectedly shorter than the past developed life time. Investigation of the cause of the outage of WRM toward the recovery of the life time up to the past developed life is one of the issues to develop the technology basis of HTGR. Then, two experimental investigations were carried out to reveal the cause of the malfunction by specifying the damaged part causing the event in the WRM. One is an experiment using a mock-up sample test which strength degradation on assembly accuracy and heat cycle to specify the damaged part in the WRM. The other is a destructive test in FMF to specify the damaged part in the WRM. This report summarized the results of the destructive test and the experimental investigation using the mock-up to reveal the cause of malfunction of WRM.
Shimizu, Atsushi; Kawamoto, Taiki; Tochio, Daisuke; Saito, Kenji; Sawahata, Hiroaki; Homma, Fumitaka; Furusawa, Takayuki; Saikusa, Akio; Shinozaki, Masayuki
Proceedings of 6th International Topical Meeting on High Temperature Reactor Technology (HTR 2012) (USB Flash Drive), 8 Pages, 2012/10
To establish the technical basis of HTGR, the long term high temperature operation using HTTR was carried out during 50-day in 2010. It is necessary to demonstrate the stability of plant during long-term operation and the reliability of components and facilities special to HTGRs, in order to attain the stable supply of the high temperature heat to the planned hydrogen production system of HTTR. Test data obtained in the operation were evaluated for the technical issues which were extracted before the operation. As the results, stability and reliability of the components and facility special to HTGRs was demonstrated by evaluating the heat transfer performance of high temperature components, the helium gas leak tightness, the reliability of the dynamic components such as helium gas circulators, the performance of heat-up protection of radiation shielding. Through the operation, the technical basis for the operation and maintenance technology of HTGRs were established.
Shinohara, Masanori; Motegi, Toshihiro; Saito, Kenji; Takada, Shoji; Ishimi, Akihiro; Katsuyama, Kozo
JAEA-Technology 2012-026, 21 Pages, 2012/08
JAEA-Technology-2012-026.pdf:2.31MB
An event, in which one of WRMs were disabled to detect the neutron flux in the reactor core, occurred during the period of reactor shut down of HTTR in March, 2010. The actual life time of WRM was unexpectedly shorter than the past developed life time. Investigation of the cause of the outage of WRM toward the recovery of the life time up to the past developed life is one of the issues to develop the technology basis of HTGR. Then, two experimental investigations were carried out to reveal the cause of the outage by specifying the damaged part causing the event in the WRM. The one is a post irradiation examination using the X-ray computed tomography scanner in Fuels Monitoring Facility (FMF) to specify the damaged part in the WRM. The other is an experiment using a mock-up simulating the WRM fabricated by the fabricator. This report summarized the results of the PIE and the experimental investigation using the mock-up to reveal the cause of outage of WRM.
Shinohara, Masanori; Sawahata, Hiroaki; Kawamoto, Taiki; Motegi, Toshihiro; Saito, Kenji; Takada, Shoji; Yoshida, Naoaki; Isozaki, Ryosuke; Katsuyama, Kozo
JAEA-Technology 2012-025, 31 Pages, 2012/08
JAEA-Technology-2012-025.pdf:4.69MB
An event, in which one of WRMs were disabled to detect the neutron flux in the reactor core, occurred during the period of reactor shut down of HTTR in March, 2010. The actual life time of WRM was unexpectedly shorter than the past developed life time. Investigation of the cause of the outage of WRM toward the recovery of the life time up to the developed life is one of the issues to develop the technology basis of High Temperature Gas cooled Reactor (HTGR). Then, a post irradiation examination was planned to specify the damaged part causing the event in the WRM was also planned. For the investigation, the X-ray computed tomography scanner in Fuels Monitoring Facility (FMF). This report describes the preliminary investigation on the cause of outage of the WRM. The results of study for transportation method of the irradiated WRM from HTTR to FMF is also reported with the record to complete the transport operation.
Tochio, Daisuke; Saito, Kenji; Shimazaki, Yosuke; Nakagawa, Shigeaki
JAEA-Technology 2011-033, 43 Pages, 2012/02
JAEA-Technology-2011-033.pdf:16.44MB
Thermal load fluctuation test of the heat utilization system using the HTTR are planned in order to demonstrate the reactor system stability in the case of thermal load fluctuation of the heat utilization system in the HTGR hydrogen production system. In the previous report, the investigation on the ACL fan stopping tests were conducted, and it was confirmed that the tests can be conducted under several conditions and provide the data needed to verify the plant dynamics simulation code for future HTGR. In this report, the investigations on the ACL pressurized water flow rate fluctuation tests were conducted. As the result, it is confirmed that the ACL pressurized water flow rate fluctuation tests can be conducted under several conditions and provide the data needed to verify the plant dynamics simulation code for future HTGR.
Tochio, Daisuke; Saito, Kenji; Shimazaki, Yosuke; Nakagawa, Shigeaki
JAEA-Technology 2011-018, 43 Pages, 2011/06
JAEA-Technology-2011-018.pdf:2.44MB
In the HTTR, safety demonstration tests are performed after the first criticality achieved in 1998. Thermal load fluctuation test of the heat utilization system using the HTTR are planned in order to demonstrate reactor system stability in the case of thermal load fluctuation of the heat utilization system in HTGR hydrogen production system. So pre-investigations of thermal-load fluctuation tests using the HTTR are conducted to investigate the available test condition. As the result, it is confirmed that the ACL fan stopping tests can be conducted under a condition and provide the data needed to verify the plant dynamics simulation code for future HTGR.
Tochio, Daisuke; Hamamoto, Shimpei; Inoi, Hiroyuki; Shimazaki, Yosuke; Sekita, Kenji; Kondo, Masaaki; Saikusa, Akio; Kameyama, Yasuhiko; Saito, Kenji; Emori, Koichi; et al.
JAEA-Technology 2010-038, 57 Pages, 2010/12
JAEA-Technology-2010-038.pdf:2.36MB
In HTTR, in-service operation is conducted through the rise-to power operation with rated operation or high-temperature test operation from achievement of first criticality at 1998. To make practical use HTGR system, it must be demonstrated to supply stable heat to heat utilization system for long-term. In HTTR, high-temperature/parallel-loaded long-term operation had been performed from January 2010. As the result, it was demonstrated to supply stable heat to heat utilization system for 50 days with HTTR, moreover, various long-term operation data were gained. This paper reports the characteristics of the high-temperature long-term operation for HTTR obtained from the operation.
Goto, Minoru; Takamatsu, Kuniyoshi; Nakagawa, Shigeaki; Ueta, Shohei; Hamamoto, Shimpei; Ohashi, Hirofumi; Furusawa, Takayuki; Saito, Kenji; Shimazaki, Yosuke; Nishihara, Tetsuo
JAEA-Technology 2009-053, 48 Pages, 2009/10
JAEA-Technology-2009-053.pdf:3.41MB
Preliminary studies on the HTTR (High Temperature engineering Test Reactor) tests were conducted to obtain characteristics and demonstration data which were required to develop commercial HTGRs (high temperature gas-cooled reactors). The tests proposed in this study are as follows: nuclear heat supply characteristics tests, burned core tests, reactivity insertion tests, safety demonstration tests, fuel characteristics tests, annular core tests, fuel failure tests, tritium measurement tests, and health confirmation tests of high temperature equipments. Requirements for a development of commercial HTGRs and confirmation methods of the requirements by the HTTR tests were summarized. Preliminary analyses were performed for the burned core test and the safety demonstration test to obtain prediction data, which is compared with experimental data. Additionally, a feasibility analysis was performed on four types annular cores, which is composed of the HTTR's fresh fuels, from the point of view of shutdown margin and excess reactivity.
Saito, Kenji; Shimizu, Atsushi; Hirato, Yoji; Kondo, Makoto; Kawamata, Takanori; Nemoto, Masumi; Motegi, Toshihiro
JAEA-Technology 2009-015, 52 Pages, 2009/05
JAEA-Technology-2009-015.pdf:10.17MB
As In-core temperature monitoring system, Type N thermocouples arranged at hot plenum block measures the primary coolant temperature at each hot plenum block in order to monitor the condition of the reactor core during the reactor operation. Type N thermocouples should have a long lifetime with high reliability under the high temperature environment of about 1000C, because they are used in HTTR reactor pressure vessel. This report shows that the characteristic change of Type N thermocouples was confirmed from operation and maintenance data of current HTTR.
Tochio, Daisuke; Nojiri, Naoki; Hamamoto, Shimpei; Inoi, Hiroyuki; Sekita, Kenji; Kondo, Masaaki; Saikusa, Akio; Kameyama, Yasuhiko; Saito, Kenji; Fujimoto, Nozomu
JAEA-Technology 2009-005, 47 Pages, 2009/05
JAEA-Technology-2009-005.pdf:4.01MB
HTTR is now conducted in-service operation through the rise-to power operation with rated operation or high-temperature test operation from achievement of first criticality at 1998. In order to demonstrate to supply stable heat to heat utilization system for long-term, HTTR was conducted rated/parallel-loaded 30-days operation. This paper reports the characteristics of long-term operation for HTTR.
Saito, Kenji; Sekita, Kenji; Kawasaki, Kozo; Yamamoto, Kazuhiko*; Matsuura, Makoto*
JAEA-Technology 2007-059, 36 Pages, 2007/11
JAEA-Technology-2007-059.pdf:26.24MB
The Wide-Range Monitoring neutron detectors of HTTR are used under 450 C in normal operation and 550 C in the accidents. When the WRM detectors are used under the high temperature for a long time, characteristics of the detector might be degraded, because of the decrease of the nitrogen concentration in the ionization gas caused by adsorbtion of nitrogen into the electrode material. Consequently, the nitrogen gas adsorption test was carried out to clarify the quantity of absorbed nitrogen gas in electrode material under the high temperature. Then, the performance evaluation test of the prototype detector was carried out, and it was confirmed that degradation of the prototype detector characteristics didn't arise under the high temperature anvironment. This report describes the results of consideration about the life-extension of WRM detectors. As a result, it was confirmed that the WRM detectors are usable for 5 years under 450 C in normal operation and 550 C in the accidents.
