The Role of collision ionization of K-shell ions in nonequilibrium plasmas produced by the action of super strong, ultrashort PW-class laser pulses on micron-scale argon clusters with intensity up to 5 10 W/cm

Skobelev, I. Yu.*; Ryazantsev, S. N.*; Kulikov, R. K.*; Sedov, M. V.*; Filippov, E. D.*; Pikuz, S. A.*; Asai, Takafumi*; Kanasaki, Masato*; Yamauchi, Tomoya*; Jinno, Satoshi; et al.

Photonics (Internet), 10(11), p.1250_1 - 1250_11, 2023/11

https://doi.org/10.3390/photonics10111250

It is challenging to clearly distinguish the impacts of the optical field and collisional ionization in the evolution of the charge state of a plasma produced when matter interacts with high-intensity laser pulses. In this work, time-dependent calculations of plasma kinetics are used to show that it is possible only when low-density gaseous targets with sufficiently small clusters are used. In the case of Ar plasma, the upper limit of the cluster radius was estimated to be m.

Plant system study of France-Japan common concept on Sodium-cooled Fast Reactor

Kato, Atsushi; Yamamoto, Tomohiko; Ando, Masato; Chikazawa, Yoshitaka; Murakami, Hisatomo*; Oyama, Kazuhiro*; Kaneko, Fumiaki*; Higurashi, Koichi*; Chanteclair, F.*; Chenaud, M.-S.*; et al.

EPJ Nuclear Sciences & Technologies (Internet), 8, p.11_1 - 11_10, 2022/06

https://doi.org/10.1051/epjn/2022006

This paper provides an overview of plant system studies to establish a common technical view for Sodium-cooled Fast Reactor concept between France and Japan based on ASTRID600 and the new concept with downsized output called ASTRID150. One of important issues on a reactor structure design is to enhance seismic resistance to be tolerable against strong earthquake such that postulated in Japan. A concept of High Frequency Design is shared, and the design options related to HFD have been examined and design recommendations are established. In addition, this paper include results of studies for a steam generator, a decay heat removal system, a fuel handling system and a containment vessel.

The Development status of Generation IV reactor systems, 1; Overview

Sagayama, Yutaka; Ando, Masato

Nihon Genshiryoku Gakkai-Shi ATOMO, 60(3), p.162 - 167, 2018/03

https://doi.org/10.3327/jaesjb.60.3_162

The Generation IV international Forum (GIF) has led international collaborative efforts to develop six next generation nuclear energy systems, such as Sodium-cooled Fast Reactor (SFR), Lead-cooled Fast Reactor (LFR), Gas-cooled Fast Reactor (GFR), Molten Salt Reactor (MSR), Supercritical Water-cooled Reactor (SCWR), and Very High Temperature Reactor (VHTR), which have superior characteristics for the Safety and Reliability, Economics, Sustainability, Proliferation Resistance and Physical Protection. Some systems are already in the Demonstration Phase and the commercialization of the system in 2030s, which is the target of GIF, comes into sight.

Laser-driven multi-charged heavy ion beam acceleration

Nishiuchi, Mamiko; Sakaki, Hironao; Esirkepov, T. Z.; Nishio, Katsuhisa; Pikuz, T. A.*; Faenov, A. Ya.*; Pirozhkov, A. S.; Sagisaka, Akito; Ogura, Koichi; Kanasaki, Masato; et al.

Research Using Extreme Light; Entering New Frontiers with Petawatt-Class Lasers II (Proceedings of SPIE, Vol.9515), p.95151D_1 - 95151D_4, 2015/06

https://doi.org/10.1117/12.2179204

Experimental demonstration of multi-charged heavy ion acceleration from the interaction between the ultra-intense short pulse laser system and the metal target is presented. The laser pulse of 10 J laser energy, 36 fs pulse width, and the contrast level of 10 from 200 TW class Ti:sapphire J-KAREN laser system at JAEA is used in the experiment. Almost fully stripped Fe ions accelerated up to 0.9 GeV are demonstrated. This is achieved by the high intensity laser field of 10Wcm interacting with the solid density target. The demonstrated iron ions with high charge to mass ratio (Q/M) is difficult to be achieved by the conventional heavy ion source technique in the accelerators.

Acceleration of highly charged GeV Fe ions from a low-Z substrate by intense femtosecond laser

Nishiuchi, Mamiko; Sakaki, Hironao; Esirkepov, T. Z.; Nishio, Katsuhisa; Pikuz, T.*; Faenov, A.*; Skobelev, I. Yu.*; Orlandi, R.; Sako, Hiroyuki; Pirozhkov, A. S.; et al.

Physics of Plasmas, 22(3), p.033107_1 - 033107_8, 2015/03

https://doi.org/10.1063/1.4913434

Almost fully stripped Fe ions accelerated up to 0.9 GeV are demonstrated with a 200 TW femtosecond high-intensity laser irradiating a micron-thick Al foil with Fe impurity on the surface. An energetic low-emittance high-density beam of heavy ions with a large charge-to-mass ratio can be obtained, which is useful for many applications, such as a compact radio isotope source in combination with conventional technology.

High power laser developments with femtosecond to nanosecond pulse durations for laser shock science and engineering

Kiriyama, Hiromitsu; Mori, Michiaki; Suzuki, Masayuki*; Daito, Izuru*; Okada, Hajime; Ochi, Yoshihiro; Tanaka, Momoko; Sato, Masatoshi*; Tamaoki, Yoshinori*; Yoshii, Takehiro*; et al.

Reza Kenkyu, 42(6), p.441 - 447, 2014/06

http://ci.nii.ac.jp/naid/40020137371

We describe three specific high power laser systems that are being developed in our laboratory for many applications in high field science, nonlinear optics and material processing. We report on a femtosecond petawatt-class Ti:sapphire chirped-pulse amplification laser system that can produce a pulse energy of 20 J of 40 fs pulse duration, a picosecond high intensity Yb:YAG chirped-pulse amplification laser system that can generate a pulse energy of 100 mJ of 0.5 ps pulse duration, and a nanosecond high repetition rate Nd:YAG laser system that can provide an average power of 360 W with a pulse duration of 30 ns delivered at a 1 kHz repetition rate. We discuss the basic design aspects and present the results from our experimental investigations of these laser systems.

Identification of high energy ions using backscattered particles in laser-driven ion acceleration with cluster-gas targets

Fukuda, Yuji; Sakaki, Hironao; Kanasaki, Masato; Yogo, Akifumi; Jinno, Satoshi; Tampo, Motonobu; Faenov, A. Ya.*; Pikuz, T.; Hayashi, Yukio; Kando, Masaki; et al.

Radiation Measurements, 50, p.92 - 96, 2013/03

https://doi.org/10.1016/j.radmeas.2012.10.010

A new diagnosis method for high energy ions utilizing a single CR-39 detector mounted on plastic plates is demonstrated to identify the presence of the high energy component beyond the CR-39's detection threshold limit. On irradiation with a 25 MeV per nucleon He ion beam from conventional rf-accelerators, a large number of etch pits having elliptical opening shapes are observed on the rear surface. Detailed investigations reveal that these etch pits are created by heavy ions inelastically backscattered from the plastic plates. This ion detection method is applied to laser-driven ion acceleration experiments using cluster-gas targets, and acceleration of ions with energies up to 50 MeV per nucleon are identified.

Hydrochemical investigation at the Mizunami Underground Research Laboratory; Compilation of groundwater chemistry in the Mizunami group and Toki granite area (April, 2004 - March, 2008)

Sai, Masataka; Hagiwara, Hiroki; Matsushima, Hiroyuki*; Noda, Masatoshi*; Noda, Masaru*; Ando, Kenichi*; Tanaka, Tatsuya*; Ueda, Tadashi*; Honda, Yuko*; Mizuno, Takashi

JAEA-Data/Code 2010-010, 75 Pages, 2010/09

JAEA-Data-Code-2010-010.pdf:2.5MB

This report compiles data set of the groundwater chemistry obtained at Mizunami Underground Research Laboratory (MIU) between the fiscal year 2004 and the fiscal year 2007. These data includes groundwater chemistry of inflow in the shafts and sampled groundwater in the boreholes, which drilled from sub-stages of MIU and from surface (MSB-2, MSB-4, and MIZ-1). Basic information (e.g. sampling location, sampling date, sampling method, analytical method) are also described in terms of quality control and traceability.

Effect of Ta rich inclusions and microstructure change during precracking on bimodal fracture of reduced-activation ferritic/martensitic steels observed in transition range

Tanigawa, Hiroyasu; Sokolov, M. A.*; Sawahata, Atsushi*; Hashimoto, Naoyuki*; Ando, Masami; Shiba, Kiyoyuki; Enomoto, Masato*; Klueh, R. L.*

Journal of ASTM International (Internet), 6(5), 10 Pages, 2009/05

The master curve (MC) method works when the transition fracture toughness values follow the MC, and once the value is scaled properly, the MC is usually independent of the type of steel or the type of test specimen. This method is very much depending on the assumption that the fracture initiation points are homogeneously distributed and its initiation mechanism is independent on test temperature. The reduced-activation ferritic/martensitic steels (RAFs), such as F82H (Fe-8Cr-2W-0.2V-0.04Ta), has AlO Ta(V,Ti)O composite inclusions, or simple Ta(V)O inclusions, and shows inhomogeneous distribution, and it was revealed that that RAFs which contain Ta could initiate the facture in the different mechanism at lower temperature as the composite inclusions become fragile, and this should be considered when the toughness measured with small size toughness specimen which is usually tested at lower temperature.

A Modular metal-fuel fast reactor with one-loop main cooling system

Chikazawa, Yoshitaka; Okano, Yasushi; Konomura, Mamoru; Sato, Koji; Sawa, Naoki*; Sumita, Hiroyuki*; Nakanishi, Shigeyuki*; Ando, Masato*

Nuclear Technology, 159(3), p.267 - 278, 2007/09

https://doi.org/10.13182/NT07-A3875

A diversified or modular power source is attractive since it requires a low construction cost per unit and can be demonstrated in small scale experimental facilities. In this study, a new metal fuel sodium cooled reactor with 300MW electric has been developed enhancing cost reduction. And economical potential at demonstration stage with first of a kind (FOAK) is emphasized. A minimum configuration with a compact reactor vessel, a one-loop main cooling system and a simple fuel handling system is adopted enhancing cost reduction. For safety evaluation, reliability of the one-loop main cooling system has been shown by pipe-break transient analyses. Besides, construction cost of a demonstration plant with a first reactor and a small reprocessing and fuel fabrication facility is also evaluated. A major feature of the present concept is that the demonstration reactor and facilities can be directly appropriated for first commercial modules and the power plant can easily increase its capacity adding reactor and electrorefiner modules. A fast reactor cycle commercialization scenario using the present concept is thought to give low R&D or investment risk and high cost performance since the total demonstration plant cost is relatively small and the facilities are directly appropriated to commercial use.