Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamaki, Tetsuya; Kozone, Yuichi*; Hiroki, Akihiro; Hosoi, Katsuhiko*; Asano, Masaharu; Kubota, Hitoshi*; Yoshida, Masaru
Denki Kagaku Oyobi Kogyo Butsuri Kagaku, 75(2), p.175 - 178, 2007/02
Times Cited Count：10 Percentile：22.72(Electrochemistry)Proton exchange membranes for use in fuel cells were prepared our original ion-track technology, which involves (1) the swift heavy ion irradiation of polyvinylidene fluoride films and subsequent chemical etching to obtain cylindrical pores, and (2) the filling of proton-conducting polymer chains into the etched pores by 
-ray-induced graft polymerization. We found that the membranes possessed one-dimensional straight proton conducting pathways parallel to the ion-beam incident axis. Such restricted structures probably led to less water uptake and lower methanol permeability compared to a commercially-available Nafion membrane.
Hamada, Kazuya; Nakajima, Hideo; Okuno, Kiyoshi; Endo, Sakaru*; Kikuchi, Kenichi*; Kubo, Yoshio*; Aoki, Nobuo*; Yamada, Yuichi*; Osaki, Osamu*; Sasaki, Takashi*; et al.
JAERI-Tech 2002-027, 23 Pages, 2002/03
JAERI-Tech-2002-027.pdf:2.94MB
The Engineering Design Activities (EDA) for the International Thermonuclear Experimental Reactor (ITER) was performed under the collaboration of Japan, EU, Russia and the US. The EDA was successfully completed in July 2001, in which the development of fabrication technology for advanced components, such as superconducting coils, was conducted. The ITER magnet system consists of Toroidal Field coils, a Central Solenoid (CS), Poloidal Field coils and Correction coils. The construction of these coils requires advanced technologies that fairly exceeded those available at the start of the EDA. Therefore, CS Model Coil and TF Model Coil projects were implemented. To fabricate the CS Model Coil, the fabrication technologies for high performance strand, large cable, winding, heat treatment, joint and insulation are indispensable. This report describes the above detailed fabrication technologies successfully developed in the CS Model Coil Project.
Al conductor with stainless steel conduitKoizumi, Norikiyo; Takahashi, Yoshikazu; Nakajima, Hideo; Tsuchiya, Yoshinori; Matsui, Kunihiro; Nunoya, Yoshihiko; Ando, Toshinari; Hiyama, Tadao; Kato, Takashi; Isono, Takaaki; et al.
Teion Kogaku, 36(8), p.478 - 485, 2001/08
no abstracts in English
Al conductorKoizumi, Norikiyo; Ando, Toshinari; Takahashi, Yoshikazu; Matsui, Kunihiro; Nakajima, Hideo; Tsuchiya, Yoshinori; Kikuchi, Kenji; Nunoya, Yoshihiko; Kato, Takashi; Isono, Takaaki; et al.
Senshin A15-gata Kagobutsu Chodendo Senzai Shimpojiumu Rombunshu, p.5 - 9, 2000/00
no abstracts in English
Tamai, Hiroshi; Kikuchi, Mitsuru; Arai, Takashi; ; *; Saido, Masahiro; Kimura, Toyoaki; Nagami, Masayuki; Shimizu, Masatsugu; *; et al.
Fusion Engineering and Design, 38(4), p.429 - 439, 1998/00
Times Cited Count：3 Percentile：31.85(Nuclear Science & Technology)no abstracts in English
Al insert after dumping for coil protection*; Koizumi, Norikiyo; Ando, Toshinari; Tsuji, Hiroshi; Kuchiishi, Yoshikazu*; Asano, Katsuhiko*
JAERI-Research 97-044, 10 Pages, 1997/07
JAERI-Research-97-044.pdf:0.58MB
no abstracts in English
Al insert coilTakeuchi, Kazuhiro*; *; *; Asano, Katsuhiko*; Koizumi, Norikiyo; Ando, Toshinari; *; Tsuji, Hiroshi; Okuno, Kiyoshi
Proc. of 15th Int. Conf. on Magnet Technology (MT-15), p.417 - 420, 1997/00
no abstracts in English
Al insert to be tested in ITER central solenoid model coilKoizumi, Norikiyo; *; *; Takahashi, Yoshikazu; Sugimoto, Makoto; Nakajima, Hideo; Kato, Takashi; Nunoya, Yoshihiko; Ando, Toshinari; Tsuji, Hiroshi; et al.
IEEE Transactions on Magnetics, 32(4), p.2236 - 2239, 1996/07
Times Cited Count：11 Percentile：63.91(Engineering, Electrical & Electronic)no abstracts in English
Takahashi, Yoshikazu; Yoshida, Kiyoshi; Tsuji, Hiroshi; *; *; *; *; *; Takahashi, Ryukichi*; Asano, Katsuhiko*; et al.
Proc. of 16th Int. Cryogenic Engineering Conf. /Int. Cryogenic Materials Conf., 0, p.811 - 814, 1996/00
no abstracts in English
