Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kusano, Kanya*; Ichimoto, Kiyoshi*; Ishii, Mamoru*; Miyoshi, Yoshizumi*; Yoden, Shigeo*; Akiyoshi, Hideharu*; Asai, Ayumi*; Ebihara, Yusuke*; Fujiwara, Hitoshi*; Goto, Tadanori*; et al.
Earth, Planets and Space (Internet), 73(1), p.159_1 - 159_29, 2021/12
Times Cited Count:6 Percentile:51.19(Geosciences, Multidisciplinary)The PSTEP is a nationwide research collaboration in Japan and was conducted from April 2015 to March 2020, supported by a Grant-in-Aid for Scientific Research on Innovative Areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan. It has made a significant progress in space weather research and operational forecasts, publishing over 500 refereed journal papers and organizing four international symposiums, various workshops and seminars, and summer school for graduate students at Rikubetsu in 2017. This paper is a summary report of the PSTEP and describes the major research achievements it produced.
Tsutsui, Satoshi; Higashinaka, Ryuji*; Nakamura, Raito*; Fujiwara, Kosuke*; Nakamura, Jin*; Kobayashi, Yoshio*; Ito, Takashi; Yoda, Yoshitaka*; Kato, Kazuo*; Nitta, Kiyofumi*; et al.
Hyperfine Interactions, 242(1), p.32_1 - 32_10, 2021/12
Times Cited Count:1 Percentile:84.42(Physics, Atomic, Molecular & Chemical)Shibano, Koya; Abe, Katsuo; Tsukasa, Kazuo*; Hosogane, Tatsuya; Kayano, Masashi; Sumi, Mika; Fujiwara, Hideki*; Yamaguchi, Kazuya*; Motoki, Chika*
Dai-41-Kai Nihon Kaku Busshitsu Kanri Gakkai Nenji Taikai Kaigi Rombunshu (Internet), 4 Pages, 2020/11
Large-sized dried spikes, called LSD spike, are used as reference material for accountancy analysis for Plutonium and Uranium by Isotope Dilution Mass Spectrometry. LSD spikes preparation is performed each steps as followed (1) Preparing Plutonium and Uranium mix solution, (2) Aliquoting mix solution to vials, and (3) Drying. J-MOX have planned prepared in-house LSD spike and utilized it for accountancy analysis. If LSD spikes are stored for long term, dried material peel off from bottom of vial and it may affect analytical results. In this study, LSD spikes, which have composition suitable for accountancy analysis in J-MOX, had been stored for about 2 years, then long-term stability of LSD spikes had been evaluated.
Tashiro, Koji*; Hanesaka, Makoto*; Yamamoto, Hiroko*; Wasanasuk, K.*; Jayaratri, P.*; Yoshizawa, Yoshinori*; Tanaka, Ichiro*; Niimura, Nobuo*; Kusaka, Katsuhiro*; Hosoya, Takaaki*; et al.
Kobunshi Rombunshu, 71(11), p.508 - 526, 2014/11
Times Cited Count:6 Percentile:22.37(Polymer Science)The crystal structure analysis of various polymer substances has been reviewed on the basis of wide-angle high-energy X-ray and neutron diffraction data. The progress in structural analytical techniques of polymer crystals have been reviewed at first. The structural models proposed so far were reinvestigated and new models have been proposed for various kinds of polymer crystals including polyethylene, poly(vinyl alcohol), poly(lactic acid) and its stereocomplex etc. The hydrogen atomic positions were also clarified by the quantitative analysis of wide-angle neutron diffraction data, from which the physical properties of polymer crystals have been evaluated theoretically. The bonded electron density distribution has been estimated for a polydiacetylene single crystal on the basis of the so-called X-N method or by the combination of structural information derived from X-ray and neutron diffraction data analysis. Some comments have been added about future developments in the field of structure-property relationship determination.
Tashiro, Koji*; Hanesaka, Makoto*; Ohara, Takashi; Ozeki, Tomoji*; Kitano, Toshiaki*; Nishu, Takashi*; Kurihara, Kazuo; Tamada, Taro; Kuroki, Ryota; Fujiwara, Satoru; et al.
Polymer Journal, 39(12), p.1253 - 1273, 2007/12
Times Cited Count:18 Percentile:49.67(Polymer Science)no abstracts in English
Takamura, Shuichi*; Kado, Shinichiro*; Fujii, Takashi*; Fujiyama, Hiroshi*; Takabe, Hideaki*; Adachi, Kazuo*; Morimiya, Osamu*; Fujimori, Naoji*; Watanabe, Takayuki*; Hayashi, Yasuaki*; et al.
Kara Zukai, Purazuma Enerugi No Subete, P. 164, 2007/03
no abstracts in English
Ninomiya, Hiromasa; Akiba, Masato; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hayashi, Nobuhiko; Hosogane, Nobuyuki; Ikeda, Yoshitaka; Inoue, Nobuyuki; et al.
Journal of the Korean Physical Society, 49, p.S428 - S432, 2006/12
To contribute DEMO and ITER, the design to modify the present JT-60U into superconducting coil machine, named National Centralized Tokamak (NCT), is being progressed under nationwide collaborations in Japan. Mission, design and strategy of this NCT program is summarized.
Kikuchi, Mitsuru; Tamai, Hiroshi; Matsukawa, Makoto; Fujita, Takaaki; Takase, Yuichi*; Sakurai, Shinji; Kizu, Kaname; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; et al.
Nuclear Fusion, 46(3), p.S29 - S38, 2006/03
Times Cited Count:13 Percentile:41.76(Physics, Fluids & Plasmas)The National Centralized Tokamak (NCT) facility program is a domestic research program for advanced tokamak research to succeed JT-60U incorporating Japanese university accomplishments. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility and mobility is pursued in aspect ratio and shape controllability, feedback control of resistive wall modes, wide current and pressure profile control capability for the demonstration of the high-b steady state.
Tsuchiya, Katsuhiko; Akiba, Masato; Azechi, Hiroshi*; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; et al.
Fusion Engineering and Design, 81(8-14), p.1599 - 1605, 2006/02
Times Cited Count:1 Percentile:9.98(Nuclear Science & Technology)no abstracts in English
Wada, Ryutaro*; Nishimura, Tsutomu*; Nakanishi, Tomoaki*; Nakayama, Takenori*; Sakashita, Shinji*; Fujiwara, Kazuo*; Tateishi, Tsuyoshi*
JNC TJ8400 2005-001, 224 Pages, 2004/02
For repository container material of high-level radioactive waste, titanium and nickel-base alloys have been investigated as high corrosion resistance metal. In this study, the effects of environmental and material factors on hydrogen absorption of titanium were investigated experimentally. As for nickel-base allys, previous studies on corrosion behavior were serched.
Wada, Ryutaro*; Nishimura, Tsutomu*; Masuda, Kaoru*; Fujiwara, Kazuo*; Imakita, Tsuyoshi*; Tateishi, Tsuyoshi*
JNC TJ8400 2004-017, 71 Pages, 2004/02
Research on changes of nitrate by interactions with metals under the wastes disposal environment containing TRU nuclide
Wada, Ryutaro*; Nishimura, Tsutomu*; Masuda, Kaoru*; Fujiwara, Kazuo*; Imakita, Tsuyoshi*; Tateishi, Tsuyoshi*
JNC TJ8400 2004-016, 194 Pages, 2004/02
Research on Changes of Nitrate by Chemical Interactions with Metals under the wastes Disposal Environment Contaioning TRU Nucride
Wada, Ryutaro*; Nishimura, Tsutomu*; Nakanishi, Tomoaki*; Fujiwara, Kazuo*; Inoue, Takao*; Tateishi, Tsuyoshi*; Masugata, Tsuyoshi*
JNC TJ8400 2003-092, 246 Pages, 2003/02
Titanium is being studied for the high-level radioactive waste package material. Titanium has good corrosion resistance, however there is the possibility of hydrogen embrittlement with absorption of hydrogen in reducing condition. Experimental studies were performed to evaluate the hydrogen absorption behaviors of titanium in reducing condition. The failure model of the titanium overpack was also examined from the viewpoint of fracture mechanism in order to evaluate the fracture behavior of the titanium overpack caused by the hydrogen absorption. (1) Scratch test was conducted in reduce condition. The surface films on the titanium specimen were analyzed to examine the changes of the existing films and the growth phenomena of the regenerated films on the titanium specimen. (2)The long-term reaction test of the titanium specimen using the glass-seal ampoules maintaining reducing condition was conducted and analyses of the hydrogen gas generation and absorption quantitative as well as the generated film evaluation were performed. (3) Under reducing condition, the electrochemical acceleration tests of the titanium specimen were conducted. The effect of acceleration rate on the hydrogen absorption and surface film was evaluated, and the prediction as to the hydrogen absorption behavior at a natural state was also made. (4) The prediction of the maximum residual stress and the evaluation of crack growth of the titanium overpack based on the previous studies were performed. Feasibility of the modeling of fracture phenomenon with existing analysis technique was examined and the items to be developed were also discussed.
Wada, Ryutaro*; Nishimura, Tsutomu*; Masuda, Kaoru*; Fujiwara, Kazuo*; Imakita, Tsuyoshi*; Tateishi, Tsuyoshi*
JNC TJ8400 2003-080, 153 Pages, 2003/02
There exists the waste including a nitrate ion as a salt in the TRU waste materials. This nitrate ion can be transferred to the nitrite ion and/or ammonia by reducing materials such as metals in the waste disposal environment, and has the possibility to affect on the disposal environment and nuclide transfer parameters.Therefore, electrochemical tests were conducted to evaluate the reaction rate parameters of the nitrate ion and metals under the low oxygen environment. The long-term reaction test using the glass-seal vessel was also conducted to grasp precisely the nitrate ion transition reaction rate and the gas generation rate caused by the reaction of metal and the nitrate ion coexist solution. (1) Reaction rate constants under various environments were obtained performing the potentiostatic holding tests with the parameters of the solution pH, temperature, and the nitrate and nitrite ion concentrations. The formula of the nitrate ion transition reaction rate was also examined based on these obtained data. (2) Conducting the immersion tests under the environment of the low oxygen and high-pH rainfall underground water site, the long-term reaction rate data were obtained on the reaction products (ammonia, hydrogen gas etc.) of metals (carbon steel, stainless steel and zircaloy etc.) with nitrate ion. The tests under the same conditions as in the past were also conducted to evaluate the test accuracy and error range of the long-term reaction test with the glass-seal vessels.
Wada, Ryutaro*; Nishimura, Tsutomu*; Masuda, Kaoru*; Fujiwara, Kazuo*; Imakita, Tsuyoshi*; Tateishi, Tsuyoshi*
JNC TJ8400 2003-079, 252 Pages, 2003/02
There exists the waste including a nitrate ion as a salt in the TRU waste materials. This nitrate ion can be transferred to the nitrite ion and/or ammonia by reducing materials such as metals in the waste disposal environment, and has the possibility to affect on the disposal environment and nuclide transfer parameters. Therefore, electrochemical tests were conducted to evaluate the reaction rate parameters of the nitrate ion and metals under the low oxygen environment. The long-term reaction test using the glass-seal vessel was also conducted to grasp precisely the nitrate ion transition reaction rate and the gas generation rate caused by the reaction of metal and the nitrate ion coexist solution. (1)}Reaction rate constants under various environments were obtained performing the potentiostatic holding tests with the parameters of the solution pH, temperature, and the nitrate and nitrite ion concentrations. The formula of the nitrate ion transition reaction rate was also examined based on these obtained data. (2) Conducting the immersion tests under the environment of the low oxygen and high-pH rainfall underground water site, the long-term reaction rate data were obtained on the reaction products (ammonia, hydrogen gas etc.) of metals (carbon steel, stainless steel and zircaloy etc.) with nitrate ion. The tests under the same conditions as in the past were also conducted to evaluate the test accuracy and error range of the long-term reaction test with the glass-seal vessels.
Wada, Ryutaro*; *; Nishimura, Tsutomu*; Fujiwara, Kazuo*; Tateishi, Tsuyoshi*
JNC TJ8400 2003-007, 86 Pages, 2003/02
The overpack for the high-level radioactive waste disposal is expected to maintain the long-term integrity and the corrosion behavior model of the overpack has been developed so far. To verify the adequacy and conservatism of the model, in this study, measurements of hydrogen absorption regarding hydrogen embrittlement of carbon steel, one of the candidate materials, were carried out in the compacted bentonite coexistence environment. The definite research programs to be performed in the future were also established for the important subjects as the extralong tests: (1)The hydrogen penetration-measuring device was designed to measure the penetrated hydrogen caused by the corrosion of carbon steel in the buffer material (compacted bentonite). (2)Out of generated hydrogen by the corrosion of carbon steel in the buffer material, the penetrated hydrogen volumes into carbon steel were measured. (3) Research programs on the four laboratory test themes and the three site test themes were established as the extralong test themes to be performed in the future.
Wada, Ryutaro*; Nishimura, Tsutomu*; Masuda, Kaoru*; Fujiwara, Kazuo*; Imakita, Tsuyoshi*; Tateishi, Tsuyoshi*
JNC TJ8400 2003-077, 156 Pages, 2002/02
Some TRU wastes contain nitrate ions as salt.The nitrate ions might transform into NO2- and NH3, etc. in the disposal site environment because of reducing agent such as metals, possibly changing disposal site environment or affecting nuclide migration parameters.Therefore, we investigated of chemical interaction between NO3- and metals in a low oxygen environment that corresponds to the disposal site environment.
Wada, Ryutaro*; Nishimura, Tsutomu*; Masuda, Kaoru*; Fujiwara, Kazuo*; Imakita, Tsuyoshi*; Tateishi, Tsuyoshi*
JNC TJ8400 2003-076, 300 Pages, 2002/02
Some TRU wastes contain nitrate ions as salt.The nitrate ions might transform into NO2- and NH3, etc. in the disposal site environment because of reducing agent such as metals, possibly changing disposal site environment or affecting nuclide migration parameters. Therefore, we investigated of chemical interaction between NO3- and metals in a low oxygen environment that corresponds to the disposal site environment.
Wada, Ryutaro*; *; Fujiwara, Kazuo*; *; Tateishi, Tsuyoshi*; Masugata, Tsuyoshi*
JNC TJ8400 2002-002, 111 Pages, 2002/02
In geologic disposal system of high-level radioactive waste, confinement by waste container must be assured over a thousand years. Titanium is one of the candidate materials, so it is important to clarify hydrogen embrittlement property under geological environment for the container lifetime prediction. The purpose of this study is to investigate hydrogen embrittlement behavior of titanium under reducing condition. Hydrogen was absorbed into titanium test pieces by electrochemical method, and tensile bending and impact tests were performed for mechanical property research. Under 1000ppm concentration of hydrogen, while distinct degradation of mechanical properties by hydrogen embrittlement occurred on dynamic stress, micro cracks induced by hydride were observed in fracture, but distinct degradation of mechanical properties by hydrogen embrittlement did not occur on static stress. Under low oxygen circumstances, corrosion rates of titanium were estimated 10 micrometer/year by hydrogen absorption method, on the contrary to 10 micrometer/year by gas evolution method. These results indicated hydrogen generated by corrosion of titanium under reducing condition, is almost absorbed into material. Carbon steel is regarded as reinforcement of the titanium nuclear fuel waste container. Magnetite, corrosion product of carbon steel, is considered to accelerate corrosion rate. Contribution of hydrogen evolution reaction to its acceleration is estimated to ca.60%.
Wada, Ryutaro*; *; Nishimura, Tsutomu*; *; *; *; Fujiwara, Kazuo*
JNC TJ8400 2002-001, 71 Pages, 2002/02
The overpack is expected to have long-term soundness, and corrosion behavior models of the overpack have been constructed. To verify validity and maintainability of the models, this study conducted a research on a super-long-term test of overpack materials for several decades. (1)We designed a testing device that would allow long-term monitoring of the corrosion behavior of carbon steel, an overpack candidate material, and the condition in the buffer material in an environment corresponding to the environment immediately after disposal. (2)We examined and prototyped a test container that would allow long-term immersion tests of carbon steel without maintenance operations such as solution exchange. (3)We proposed super-long-term tests (about 20 years) that would contribute to future geological disposal projects and safety rules. (4)We investigated a method for managing and preserving the records of the super-long-term test for the test period (20 years).