ARKADIA; For the innovation of advanced nuclear reactor design

Ohshima, Hiroyuki; Asayama, Tai; Furukawa, Tomohiro; Tanaka, Masaaki; Uchibori, Akihiro; Takata, Takashi; Seki, Akiyuki; Enuma, Yasuhiro

Journal of Nuclear Engineering and Radiation Science, 9(2), p.025001_1 - 025001_12, 2023/04

https://doi.org/10.1115/1.4054726

This paper describes the outline and development plan for ARKADIA to transform advanced nuclear reactor design to meet expectations of a safe, economic, and sustainable carbon-free energy source. ARKADIA will realize Artificial Intelligence (AI)-aided integrated numerical analysis to offer the best possible solutions for the design and operation of a nuclear plant, including optimization of safety equipment. State-of-the-art numerical simulation technologies and a knowledge base that stores data and insights from past nuclear reactor development projects and R&D are integrated with AI. In the first phase of development, ARKADIA-Design and ARKADIA-Safety will be constructed individually, with the first target of sodium-cooled reactor. In a subsequent phase, everything will be integrated into a single entity applicable not only to advanced rectors with a variety of concepts, coolants, configurations, and output levels but also to existing light-water reactors.

Ultra-high temperature creep rupture and transient burst strength of ODS steel claddings

Yano, Yasuhide; Sekio, Yoshihiro; Tanno, Takashi; Kato, Shoichi; Inoue, Toshihiko; Oka, Hiroshi; Otsuka, Satoshi; Furukawa, Tomohiro; Uwaba, Tomoyuki; Kaito, Takeji; et al.

Journal of Nuclear Materials, 516, p.347 - 353, 2019/04

https://doi.org/10.1016/j.jnucmat.2019.01.052

9Cr-ODS steel claddings consisting of tempered martensitic matrix, showed prominent creep rupture strength at 1000 C, which surpassed that of heat-resistant austenitic steels although creep rupture strength of tempered martensitic steels is generally lower than that of austenitic steels at high temperatures. The measured creep rupture strength of 9Cr-ODS steel claddings at 1000 C was higher than that from extrapolated creep rupture trend curves formulated using data at temperatures from 650 to 850 C. This superior strength seemed to be owing to transformation of the matrix from the -phase to the -phase. The transient burst strengths for 9Cr-ODS steel were much higher than those for 11Cr-ferritic/martensitic steel (PNC-FMS). Cumulative damage fraction analyses suggested that the life fraction rule can be used for the rupture life prediction of 9Cr-ODS steel and PNC-FMS claddings in the transient and accidental events with a certain accuracy.

Prediction method of improved residual stress distribution by shot peening using large scale analysis method

Ikushima, Kazuki*; Shibahara, Masakazu*; Nishikawa, Satoru*; Furukawa, Takashi*; Akita, Koichi; Suzuki, Hiroshi; Morooka, Satoshi

E-Journal of Advanced Maintenance (Internet), 9(3), p.NT87_1 - NT87_5, 2017/11

http://www.jsm.or.jp/ejam/Vol.9No.3/NT/NT87/87.html

Study on shot peened residual stress distribution under cyclic loading by numerical analysis

Ikushima, Kazuki*; Kitani, Yuji*; Shibahara, Masakazu*; Nishikawa, Satoru*; Furukawa, Takashi*; Akita, Koichi; Suzuki, Hiroshi; Morooka, Satoshi

Yosetsu Gakkai Rombunshu (Internet), 35(2), p.75s - 79s, 2017/06

http://www.jweld.jp/quarterly/v35/visual/35_75s.pdf

Ultra-high temperature tensile properties of ODS steel claddings under severe accident conditions

Yano, Yasuhide; Tanno, Takashi; Oka, Hiroshi; Otsuka, Satoshi; Inoue, Toshihiko; Kato, Shoichi; Furukawa, Tomohiro; Uwaba, Tomoyuki; Kaito, Takeji; Ukai, Shigeharu*; et al.

Journal of Nuclear Materials, 487, p.229 - 237, 2017/04

https://doi.org/10.1016/j.jnucmat.2017.02.021

Ultra-high temperature ring tensile tests were carried out to investigate the tensile behavior of oxide dispersion strengthened (ODS) steel claddings and wrapper materials under severe accident conditions; temperatures ranged from room temperature to 1400C which is near the melting point of core materials. The experimental results showed that tensile strength of 9Cr-ODS steel claddings was highest in the core materials at the ultra-high temperatures between 900 and 1200C, but that there was significant degradation in tensile strength of 9Cr-ODS steel claddings above 1200C. This degradation was attributed to grain boundary sliding deformation with / transformation, which was associated with reduced ductility. On the other hand, tensile strength of recrystallized 12Cr-ODS and FeCrAl-ODS steel claddings retained its high value above 1200 C unlike the other tested materials. Present study includes the result of "R&D of ODS ferritic steel fuel cladding for maintaining fuel integrity at the high temperature accident condition" entrusted to Hokkaido University by the Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT).

Development of risk assessment methodology of decay heat removal function against natural external hazards for sodium-cooled fast reactors; Project overview and volcanic PRA methodology

Yamano, Hidemasa; Nishino, Hiroyuki; Kurisaka, Kenichi; Okano, Yasushi; Sakai, Takaaki; Yamamoto, Takahiro*; Ishizuka, Yoshihiro*; Geshi, Nobuo*; Furukawa, Ryuta*; Nanayama, Futoshi*; et al.

Proceedings of 24th International Conference on Nuclear Engineering (ICONE-24) (DVD-ROM), 10 Pages, 2016/06

https://doi.org/10.1115/ICONE24-60023

This paper describes mainly volcanic probabilistic risk assessment (PRA) methodology development for sodium-cooled fast reactors in addition to the project overview. The volcanic ash could potentially clog air filters of air-intakes that are essential for the decay heat removal. The degree of filter clogging can be calculated by atmospheric concentration of ash and tephra fallout duration and also suction flow rate of each component. The atmospheric concentration can be calculated by deposited tephra layer thickness, tephra fallout duration and fallout speed. This study evaluated a volcanic hazard using a combination of tephra fragment size, layer thickness and duration. In this paper, each component functional failure probability was defined as a failure probability of filter replacement obtained by using a grace period to a filter failure limit. Finally, based on an event tree, a core damage frequency was estimated about 310/year in total by multiplying discrete hazard probabilities by conditional decay heat removal failure probabilities. A dominant sequence was led by the loss of decay heat removal system due to the filter clogging after the loss of emergency power supply. A dominant volcanic hazard was 10 kg/m of atmospheric concentration, 0.1 mm of tephra diameter, 50-75 cm of deposited tephra layer thickness, and 1-10 hr of tephra fallout duration.

Development of risk assessment methodology of decay heat removal function against external hazards for sodium-cooled fast reactors, 1; Project overview and margin assessment methodology against snow

Yamano, Hidemasa; Nishino, Hiroyuki; Kurisaka, Kenichi; Okano, Yasushi; Sakai, Takaaki; Yamamoto, Takahiro*; Ishizuka, Yoshihiro*; Geshi, Nobuo*; Furukawa, Ryuta*; Nanayama, Futoshi*; et al.

Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 10 Pages, 2015/05

This paper describes mainly snow margin assessment methodology development in addition to the project overview. For the snow margin assessment, the index is a combination of a snowfall rate and duration. Since snow removal can be expected during the snowfall, the developed snow margin assessment methodology is such that the margin was regarded as the snowfall duration up to the decay heat removal failure which was defined as when the snow removal rate was smaller than the snowfall rate.

Development of margin assessment methodology of decay heat removal function against external hazards; Project overview and preliminary risk assessment against snow

Yamano, Hidemasa; Nishino, Hiroyuki; Kurisaka, Kenichi; Sakai, Takaaki; Yamamoto, Takahiro*; Ishizuka, Yoshihiro*; Geshi, Nobuo*; Furukawa, Ryuta*; Nanayama, Futoshi*; Takata, Takashi*

Proceedings of 12th Probabilistic Safety Assessment and Management Conference (PSAM-12) (USB Flash Drive), 11 Pages, 2014/06

This paper describes mainly preliminary risk assessment against snow in addition to the project overview. The snow hazard indexes are the annual maximum snow depth and the annual maximum daily snowfall depth. Snow hazard curves for the two indexes were developed using 50 year weather data at the typical sodium-cooled fast reactor site in Japan. In this paper, the snow risk assessment showed less than 10/reactor-year of core damage frequency. The dominant snow hazard category was the combination of 1-2m/day of snowfall velocity and 0.75-1.0 day of snowfall duration. Sensitivity analyses indicated important human actions, which were the improvement of snow removal velocity and the awareness of snow removal necessity.

Compatibility of zirconium alloys in high-temperature sodium

Furukawa, Tomohiro; Kato, Shoichi; Maeda, Shigetaka; Yamamoto, Masaya; Sekine, Takashi; Ito, Chikara

JAEA-Research 2011-039, 20 Pages, 2012/02

JAEA-Research-2011-039.pdf:3.4MB

Application of zirconium alloy as a neutron reflector around the driver fuel region of the Japanese experimental fast reactor JOYO has been planned for a further increase of core average burn-up. In order to investigate the compatibility of the zirconium alloys with high-temperature sodium which is coolant of the JOYO, corrosion test in sodium and tensile test of the exposed alloys were performed. The corrosion test was done at 500C and 650C in stagnant/flowing sodium for two kinds of zirconium alloys, and then weight change measurement and metallurgical observation were carried out. The tensile test was performed in air at the same temperature with the sodium exposure.

Progress in R&D efforts on the energy recovery linac in Japan

Sakanaka, Shogo*; Ago, Tomonori*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; Harada, Kentaro*; Hiramatsu, Shigenori*; Honda, Toru*; et al.

Proceedings of 11th European Particle Accelerator Conference (EPAC '08) (CD-ROM), p.205 - 207, 2008/06

Future synchrotron light sources based on the energy-recovery linacs (ERLs) are expected to be capable of producing super-brilliant and/or ultra-short pulses of synchrotron radiation. Our Japanese collaboration team is making efforts for realizing an ERL-based hard X-ray source. We report recent progress in our R&D efforts.