Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
C in Mod.9Cr-1Mo steel to 1
10
cyclesToyota, Kodai; Imagawa, Yuya; Onizawa, Takashi; Kato, Shoichi; Furuya, Yoshiyuki*
Nihon Kikai Gakkai Rombunshu (Internet), 89(928), p.23-00206_1 - 23-00206_15, 2023/12
In order to design fast reactors, it is necessary to consider high cycle fatigue of structural materials up to 110
cycles; to evaluate high cycle fatigue at 110 cycles, it is necessary to develop a best-fit fatigue curve applicable up to 110 cycles. In this study, high cycle fatigue tests were conducted under strain-controlled conditions and ultrasonic fatigue tests were also conducted to develop a high cycle fatigue evaluation method for Mod.9Cr-1Mo steel, which is a candidate material for fast reactor structural materials. Based on the test results, the best-fit fatigue curves were extended and the applicability of the JSME best-fit fatigue curves up to 110 cycles was verified.
Sakanaka, Shogo*; Akemoto, Mitsuo*; Aoto, Tomohiro*; Arakawa, Dai*; Asaoka, Seiji*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; et al.
Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2338 - 2340, 2010/05
Future synchrotron light source using a 5-GeV energy recovery linac (ERL) is under proposal by our Japanese collaboration team, and we are conducting R&D efforts for that. We are developing high-brightness DC photocathode guns, two types of cryomodules for both injector and main superconducting (SC) linacs, and 1.3 GHz high CW-power RF sources. We are also constructing the Compact ERL (cERL) for demonstrating the recirculation of low-emittance, high-current beams using above-mentioned critical technologies.
Sakanaka, Shogo*; Ago, Tomonori*; Enomoto, Atsushi*; Fukuda, Shigeki*; Furukawa, Kazuro*; Furuya, Takaaki*; Haga, Kaiichi*; Harada, Kentaro*; Hiramatsu, Shigenori*; Honda, Toru*; et al.
Proceedings of 11th European Particle Accelerator Conference (EPAC '08) (CD-ROM), p.205 - 207, 2008/06
Future synchrotron light sources based on the energy-recovery linacs (ERLs) are expected to be capable of producing super-brilliant and/or ultra-short pulses of synchrotron radiation. Our Japanese collaboration team is making efforts for realizing an ERL-based hard X-ray source. We report recent progress in our R&D efforts.
Enoeda, Mikio; Kosaku, Yasuo; Hatano, Toshihisa; Kuroda, Toshimasa*; Miki, Nobuharu*; Homma, Takashi; Akiba, Masato; Konishi, Satoshi; Nakamura, Hirofumi; Kawamura, Yoshinori; et al.
Nuclear Fusion, 43(12), p.1837 - 1844, 2003/12
Times Cited Count：101 Percentile：93.45(Physics, Fluids & Plasmas)no abstracts in English
Yasuda, Hitoshi*; Nodaka, Masayuki*; Mantani, Kenichi*; Kamikubo, Fumio*; Furuya, Takashi*; Ichikawa, Shiro*
PNC TJ8058 97-007, 583 Pages, 1997/03
None
Yokoyama, Hiroomi*; Kanazawa, Toshio*; Fukuma, Tadashi*; Tamekiyo, Kozo*; Yanagida, Koji*; Furuya, Takashi*; Kono, Hiroshi*; Ito, Keiji*; Shirakura, Takao*; Kashiwara, Shinichiro*; et al.
PNC TN8410 87-086VOL2, 944 Pages, 1986/09
Yokoyama, Hiroomi*; Kanazawa, Toshio*; Fukuma, Tadashi*; Tamekiyo, Kozo*; Yanagida, Koji*; Furuya, Takashi*; Kono, Hiroshi*; Ito, Keiji*; Shirakura, Takao*; Kashiwara, Shinichiro*; et al.
PNC TN8410 87-086VOL1, 1037 Pages, 1986/09
PNC-TN8410-87-086VOL1.pdf:34.39MB
A detailed design for a New Material Nitric Acid Recovery Evaporator was carried out with a plan to use it to replace an already constructed stainless steel Nitric Acid Recovery Evaporator at the Power Reactor and Nuclear Fuel Development Corporation's Tokai Works. Most of the original Evaporator's conditions such as compliance with applicable laws, standards, structure, treatment performance and operating conditions were maintained when designing the new machine. The material is titanium with the addition of 5% tantalum. The Evaporator was designed with an operational life expectance of 10 years. We have calculated that the new Evaporator will have sufficient strength (including a seismatic design) and have the same evaporative performance as the already constructed one. During design, we referred to the results of already completed basic designs (Phase 1) of New Material Nitric Acid Recovery Evaporators, design and production of small-scale test equipment units, and the development of successful joints between different materials. We also considered manufacturing, installation, trial runs, maintenance, and the specifications for materials used for manufacturing, installation, piping and operation of the new Evaporator.
Wakai, Eiichi; Noto, Hiroyuki*; Shibayama, Tamaki*; Nakagawa, Yuki*; Ishida, Taku*; Makimura, Shunsuke*; Wakui, Takashi; Furuya, Kazuyuki*; Ando, Masami*
no journal, ,
In the fields of energy, nuclear power, high-energy accelerator target systems, nuclear fusion, and biology, radiation causes degradation of materials and equipment, and thus it is expected to create new materials with high durability and superior functionality. In this study, for Fe-, Ti-, and W-based high-entropy alloys (HEA) composed of low activation elements (Ni and Co free), Fe-based alloys were prepared by radio frequency melting, Ti-based alloys by cold crucible levitation melting, and W-based alloys by arc melting using metal powders. These materials were tested by X-ray diffraction, microstructural observation, hardness measurement, magnetic measurement, electrical resistivity measurement, scanning transmission electron microscope STEM (or TEM, SEM) and energy dispersive X-ray spectroscopy, ultrasonic measurement, and hot isostatic pressing (HIP) method. These HEAs were found to be much harder than normal alloys, and in Fe-based HEAs, the magnetic properties and related microstructural analysis showed that they have interesting characteristics such as micro magnetic domain structures. In particular, for Fe- and W-based HEAs, the changes in crystal structure, orientation, and internal microstructure caused by HIP treatment and the accompanying effects of high temperature and pressure have been found to have a significant effect on magnetic properties and material strength properties.
Wakai, Eiichi; Shibayama, Tamaki*; Noto, Hiroyuki*; Furuya, Kazuyuki*; Iwamoto, Yosuke; Wakui, Takashi; Makimura, Shunsuke*; Ishida, Taku*; Ando, Masami*; Sato, Koichi*; et al.
no journal, ,
In fields such as nuclear power and high-energy accelerator target systems, radiation causes degradation of materials and equipment, so materials with high durability and excellent functionality are expected to be created. High-entropy alloys (HEA) are expected to have high irradiation resistance and often have high strength and good ductility. In recent years, research and development is underway worldwide for various applications. In this study, Fe- and Ti-based and W-based HEAs composed of low activation elements (free of Ni and Co) were fabricated. These materials were subjected to X-ray diffraction, microstructural observation, hardness, magnetism, electrical resistance, STEM (or TEM, SEM) and EDS, ultrasonic measurements, and hot isostatic pressing (HIP). Ion irradiation, pulsed laser irradiation, and pulsed electron beam irradiation were also performed on some of the samples to investigate their response characteristics. These HEAs were much harder than normal alloys, and the magnetic properties and related microstructural analysis of Fe-based HEAs revealed that they have interesting properties such as micro magnetic domain structures. In particular, for Fe- and W-based HEAs, the changes in crystal structure, orientation, and internal microstructure induced by HIP treatment and the accompanying effects of high temperature and pressure had a significant effect on magnetic properties and material strength properties. Furthermore, the irradiation response properties of Fe-based HEAs have been characterized.
Wakai, Eiichi; Noto, Hiroyuki*; Shibayama, Tamaki*; Iwamoto, Yosuke; Ishida, Taku*; Sato, Koichi*; Yabuuchi, Atsushi*; Yoshiie, Toshimasa*; Takahashi, Toshiharu*; Kobayashi, Yasuhiro*; et al.
no journal, ,
In recent years, it has been reported that high-entropy alloys (HEA) have high strength but good ductility, and they are being researched and developed by cutting-edge research institutions around the world with the aim of finding various applications in progress. In this study, we considered several Fe-based, W-based, and Ti-based HEAs, excluding Co and Ni elements, in order to aim for use in high radiation fields and considering low-activation properties. These materials mainly have a bcc crystal structure and were fabricated using a melting method and their material properties were evaluated. As a result, it was found that Fe-based HEA has properties that exceed the hardness of pure W and has excellent irradiation resistance. In addition, a Ti-based HEA that can be subjected to high-temperature forging and high-temperature rolling has been found, and evaluation of the optimal heat treatment temperature is progressing. The hardness of W-based HEA increased through Hot Isostatic Pressing (HIP) treatment, and it was found to have the world's highest hardness among HEA materials.
