Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
titanium alloys strong and ductileChong, Y.*; Gholizadeh, R.*; Guo, B.*; Tsuru, Tomohito; Zhao, G.*; Yoshida, Shuhei*; Mitsuhara, Masatoshi*; Godfrey, A.*; Tsuji, Nobuhiro*
Acta Materialia, 257, p.119165_1 - 119165_14, 2023/09
Times Cited Count：5 Percentile：87.83(Materials Science, Multidisciplinary)Metastable titanium alloys possess excellent strain-hardening capability, but suffer from a low yield strength. As a result, numerous attempts have been made to strengthen this important structural material in the last decade. Here, we explore the contributions of grain refinement and interstitial additions in raising the yield strength of a Ti-12Mo (wt.%) metastable titanium alloy. Surprisingly, rather than strengthening the material, grain refinement actually lowers the ultimate tensile strength in this alloy. This unexpected and anomalous behavior is attributed to a significant enhancement in strain-induced 
martensite phase transformation, where in-situ synchrotron X-ray diffraction analysis reveals, for the first time, that this phase is much softer than the parent phase. Instead, a combination of both oxygen addition and grain refinement is found to realize an unprecedented strength-ductility synergy in a Ti-12Mo-0.3O (wt.%) alloy. The advantageous effect of oxygen solutes in this ternary alloy is twofold. Firstly, solute oxygen largely suppresses strain-induced transformation to the martensite phase, even in a fine-grained microstructure, thus avoiding the softening effect of excessive amounts of martensite. Secondly, oxygen solutes readily segregate to twin boundaries, as revealed by atom probe tomography. This restricts the growth of 
deformation twins, thereby promoting more extensive twin nucleation, leading to enhanced microstructural refinement. The insights from our work provide a cost-effective rationale for the design of strong yet tough metastable titanium alloys, with significant implications for more widespread use of this high strength-to-weight structural material.
Chong, Y.*; Gholizadeh, R.*; Tsuru, Tomohito; Zhang, R.*; Inoue, Koji*; Gao, W.*; Godfrey, A.*; Mitsuhara, Masatoshi*; Morris, J. W. Jr.*; Minor, A. M.*; et al.
Nature Communications (Internet), 14, p.404_1 - 404_11, 2023/02
Times Cited Count：6 Percentile：91.62(Multidisciplinary Sciences)Interstitial oxygen embrittles titanium, particularly at cryogenic temperatures, which necessitates a stringent control of oxygen content in fabricating titanium and its alloys. Here, we propose a structural strategy, via grain refinement, to alleviate this problem. Compared to a coarse-grained counterpart that is extremely brittle at 77K, the uniform elongation of an ultrafine-grained (UFG) microstructure (grain size 
2.0 
m) in Ti-0.3wt.%O was successfully increased by an order of magnitude, maintaining an ultrahigh yield strength inherent to the UFG microstructure. This unique strength-ductility synergy in UFG Ti-0.3wt.%O was achieved via the combined effects of diluted grain boundary segregation of oxygen that helps to improve the grain boundary cohesive energy and enhanced 
dislocation activities that contribute to the excellent strain hardening ability. The present strategy could not only boost the potential applications of high strength Ti-O alloys at low temperatures, but could also be applied to other alloy systems, where interstitial solution hardening results into an undesirable loss of ductility.
Zhang, S. Y.*; Godfrey, E.*; Kockelmann, W.*; Paradowska, A.*; Bull, M. J.*; Korsunsky, A. M.*; Abbey, B.*; Xu, P. G.; Tomota, Yo*; Liljedahl, D.*; et al.
Materials Today, 12(7-8), p.78 - 84, 2009/07
Times Cited Count：19 Percentile：51.09(Materials Science, Multidisciplinary)Neutron diffraction methods offer a direct measure of the elastic component of strain deep within crystalline materials through precise characterisation of the interplanar crystal lattice spacing. The unique non-destructive nature of this measurement technique is particularly beneficial in the context of engineering design and archaeological materials science, since it allows the evaluation of a variety of structural and deformational parameters inside real components without material removal, or at worst with minimal interference. We review a wide range of recent experimental studies using the Engin-X materials engineering instrument at the ISIS neutron source and show how the technique provides the basis for developing improved insight into materials of great importance to applications and industry.
Zhang, S. Y.*; Godfrey, E.*; Abbey, B.*; Xu, P. G.; Tomota, Yo*; Liljedahl, D.*; Zanellato, O.*; Fitzpatrick, M.*; Kelleher, J.*; Siano, S.*; et al.
Proceedings of World Congress on Engineering 2009, Vol.2, p.1412 - 1419, 2009/00
Pulsed neutron beams available at the ISIS spallation source offer diverse possibilities for materials characterization using diffraction and imaging. In this paper, we review a range of applications of the time-of-flight neutron diffraction for the characterization of phase transformations and residual stress states in industrially-relevant situations. The setup of the ENGIN-X instrument at ISIS is described, followed by a series of case studies based on the recently obtained results.
