Assessment of hydrogen embrittlement behavior in Al-Zn-Mg alloy through multi-modal 3D image-based simulation

Fujihara, Hiro*; Toda, Hiroyuki*; Ebihara, Kenichi; Kobayashi, Masakazu*; Mayama, Tsuyoshi*; Hirayama, Kyosuke*; Shimizu, Kazuyuki*; Takeuchi, Akihisa*; Uesugi, Masayuki*

International Journal of Plasticity, 174, p.103897_1 - 103897_22, 2024/03

https://doi.org/10.1016/j.ijplas.2024.103897

Hydrogen(H) embrittlement in high-strength aluminum(Al) alloys is a crucial problem. H accumulation at the interface of precipitates in Al alloy is considered to cause embrittlement. However, there is no quantitative knowledge regarding the interaction between H distribution and stress field near cracks. In this study, using a multi-modal three-dimensional image-based simulation combining the crystal plasticity finite element method and H diffusion analysis, we tried to capture the stress distribution near the crack, its influence on the H distribution, and the probability of crack initiation in the experimental condition. As a result, it was found that grain boundary cracks transition to quasi-cleavage cracks in the region where the cohesive energy of the semi-coherent interface of MgZn precipitates decreases due to H accumulation near the tip. We believe the present simulation method successfully bridges nanoscale delamination and macroscale brittle fracture.

Stress corrosion cracking induced by the combination of external and internal hydrogen in Al-Zn-Mg-Cu alloy

Tang, J.*; Wang, Y.*; Fujihara, Hiro*; Shimizu, Kazuyuki*; Hirayama, Kyosuke*; Ebihara, Kenichi; Takeuchi, Akihisa*; Uesugi, Masayuki*; Toda, Hiroyuki*

Scripta Materialia, 239, p.115804_1 - 115804_5, 2024/01

https://doi.org/10.1016/j.scriptamat.2023.115804

Stress corrosion cracking (SCC) behaviors induced by the combination of external and internal hydrogen (H) in an Al-Zn-Mg-Cu alloy were systematically investigated via in situ 3D characterization techniques. SCC of the Al-Zn-Mg-Cu alloy could initiate and propagate in the potential crack region where the H concentration exceeded a critical value, in which the nanoscopic H-induced decohesion of -MgZn precipitates resulted in macroscopic cracking. External H that penetrated the alloy from the environment played a crucial role during the SCC of the Al-Zn-Mg-Cu alloy by generating gradient-distributed H-affected zones near the crack tips, which made Al alloys in water environment more sensitive to SCC. Additionally, the pre-existing internal H was driven toward the crack tips during plastic deformation. It was involved in the SCC and made contributions to both the cracks initiation and propagation.

Numerical simulation technologies for safety evaluation in plant lifecycle optimization method, ARKADIA for advanced reactors

Uchibori, Akihiro; Doda, Norihiro; Aoyagi, Mitsuhiro; Sonehara, Masateru; Sogabe, Joji; Okano, Yasushi; Takata, Takashi*; Tanaka, Masaaki; Enuma, Yasuhiro; Wakai, Takashi; et al.

Nuclear Engineering and Design, 413, p.112492_1 - 112492_10, 2023/11

https://doi.org/10.1016/j.nucengdes.2023.112492

The ARKAIDA has been developed to realize automatic optimization of plant design from safety evaluation for the advanced reactors represented by a sodium-cooled fast reactor. ARKADIA-Design offers functions to support design optimization both in normal operating conditions and design basis events. The multi-level simulation approach by the coupled analysis such as neutronics, core deformation, core thermal hydraulics was developed as one of the main technologies. On the other hand, ARKAIDA-Safety aims for safety evaluation considering severe accidents. As a key technology, the numerical methods for in- and ex-vessel coupled phenomena during severe accidents in sodium-cooled fast reactors were tested through a hypothetical severe accident event. Improvement of the ex-vessel model and development of the AI technology to find best design solution have been started.

Update of Bragg edge analysis software "GUI-RITS"

Oikawa, Kenichi; Sato, Hirotaka*; Watanabe, Kenichi*; Su, Y. H.; Shinohara, Takenao; Kai, Tetsuya; Kiyanagi, Yoshiaki*; Hasemi, Hiroyuki

Journal of Physics; Conference Series, 2605, p.012013_1 - 012013_6, 2023/10

https://doi.org/10.1088/1742-6596/2605/1/012013

Hydrogen embrittlement and its prevention in 7XXX aluminum alloys with high Zn concentrations

Shimizu, Kazuyuki*; Toda, Hiroyuki*; Fujihara, Hiro*; Yamaguchi, Masatake; Uesugi, Masayuki*; Takeuchi, Akihisa*; Nishijima, Masahiko*; Kamada, Yasuhiro*

Corrosion, 79(8), p.818 - 830, 2023/08

https://doi.org/10.5006/4300

7xxx aluminum alloys are representative high-strength aluminum alloys; however, mechanical property degradation due to hydrogen hinders further strengthening. We propose the dispersion of Mn-based second-phase particles as a novel technique for preventing 7xxx aluminum alloy hydrogen embrittlement. In this study, the deformation and fracture behaviors of high hydrogen 7xxx alloys containing 0.0% Mn and 0.6% Mn are observed in situ using synchrotron radiation X-ray tomography. The obtained macroscopic hydrogen embrittlement is quantitatively analyzed based on hydrogen partitioning in alloys. Adding 0.6% Mn, generating second-phase particles with high hydrogen trapping abilities, significantly suppresses hydrogen-induced quasicleavage fracture.

Identification of hydrogen trapping in aluminum alloys muon spin relaxation method and first-principles calculations

Tsuru, Tomohito; Nishimura, Katsuhiko*; Matsuda, Kenji*; Nunomura, Norio*; Namiki, Takahiro*; Lee, S.*; Higemoto, Wataru; Matsuzaki, Teiichiro*; Yamaguchi, Masatake; Ebihara, Kenichi; et al.

Metallurgical and Materials Transactions A, 54(6), p.2374 - 2383, 2023/06

https://doi.org/10.1007/s11661-023-07024-w

Although hydrogen embrittlement susceptibility of high-strength Al alloys is recognized as a critical issue in the practical use of Al alloys, identifying the hydrogen trapping or distribution has been challenging. In the present study, an effective approach based on experiment and simulation is proposed to explore the potential trap sites in Al alloys. Zero-field muon spin relaxation experiments were carried out for Al-0.5%Mg, Al-0.2%Cu, Al-0.15%Ti, Al-0.011%Ti, Al-0.28%V, and Al-0.015%V (at.%) in the temperature range from 5 to 300 K. The temperature variations of the dipole field widths have revealed three peaks for Al-0.5%Mg, four peaks for Al-0.2%Cu, three peaks for Al-0.011%Ti and Al-0.015%V. Atomic configurations of the muon trapping sites corresponding to the observed peaks are well assigned using the first-principles calculations for the trap energies of hydrogen around a solute and solute-vacancy pair. The extracted linear relationship between the muon peak temperature and the trap energy enables us to explore the potential alloying elements and their complex that have strong binding energies with hydrogen in Al alloys.

Measurement of 107-MeV proton-induced double-differential thick target neutron yields for Fe, Pb, and Bi using a fixed-field alternating gradient accelerator at Kyoto University

Iwamoto, Hiroki; Nakano, Keita; Meigo, Shinichiro; Satoh, Daiki; Iwamoto, Yosuke; Sugihara, Kenta; Nishio, Katsuhisa; Ishi, Yoshihiro*; Uesugi, Tomonori*; Kuriyama, Yasutoshi*; et al.

Journal of Nuclear Science and Technology, 60(4), p.435 - 449, 2023/04

https://doi.org/10.1080/00223131.2022.2115423

Double-differential thick target neutron yields (TTNYs) for Fe, Pb, and Bi targets induced by 107-MeV protons were measured using the fixed-field alternating gradient accelerator at Kyoto University for research and development of accelerator-driven systems (ADSs) and fundamental ADS reactor physics research at the Kyoto University Critical Assembly (KUCA). Note that TTNYs were obtained with the time-of-flight method using a neutron detector system comprising eight neutron detectors; each detector has a small NE213 liquid organic scintillator and photomultiplier tube. The TTNYs obtained were compared with calculation results using Monte Carlo-based spallation models (i.e., INCL4.6/GEM, Bertini/GEM, JQMD/GEM, and JQMD/SMM/GEM) and the evaluated high-energy nuclear data library, i.e., JENDL-4.0/HE, implemented in the particle and heavy iontransport code system (PHITS). All models, including JENDL-4.0/HE, failed to predict high-energy peaks at a detector angle of 5. Comparing the energy- and angle-integrated spallation neutron yields at energies of 20 MeV estimated using the measured TTNYs and the PHITS indicated that INCL4.6/GEM would be suitable for the Monte Carlo transport simulation of ADS reactor physics experiments at the KUCA.

Study of the and shell gap for Ti and V by the first high-precision multireflection time-of-flight mass measurements at BigRIPS-SLOWRI

Iimura, Shun*; Rosenbusch, M.*; Takamine, Aiko*; Tsunoda, Yusuke*; Wada, Michiharu*; Chen, S.*; Hou, D. S.*; Xian, W.*; Ishiyama, Hironobu*; Yan, S.*; et al.

Physical Review Letters, 130(1), p.012501_1 - 012501_6, 2023/01

https://doi.org/10.1103/PhysRevLett.130.012501

Sodium-cooled Fast Reactors

Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.

Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07

https://shop.elsevier.com/books/sodium-cooled-fast-reactors/morishita/978-0-12-824076-2

This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.

Hyperfine splitting and nuclear spin polarization in NdPdAl and NdPdGe

Metoki, Naoto; Shibata, Kaoru; Matsuura, Masato*; Kitazawa, Hideaki*; Suzuki, Hiroyuki*; Yamauchi, Hiroki; Hagihara, Masato; Frontzek, M. D.*; Matsuda, Masaaki*

Journal of the Physical Society of Japan, 91(5), p.054710_1 - 054710_6, 2022/05

https://doi.org/10.7566/JPSJ.91.054710

Hyperfine splitting of Nd nuclei in NdPdAl has been studied by means of high-resolution neutron spectroscopy. We observed inelastic peaks at eV coming from the hyperfine splitting in the magnetically ordered phase due to the hyperfine interactions between Nd nuclei (=7/2) and the 4 electrons with ground state composed of mainly . At very low temperatures, nuclear spin of Nd is polarized with increasing occupation probability of low energy levels and contributes to the enhancement of the antiferromagnetic Bragg intensities: the elastic non-spin-flip channel is dominant. As an application of this phenomenon, we determined the Nd moment and hyperfine splitting from the temperature dependence of an antiferromagnetic Bragg intensities for NdPdGe.