Effects of dislocation arrangement and character on the work hardening of lath martensitic steels

Dannoshita, Hiroyuki*; Hasegawa, Hiroshi*; Higuchi, Sho*; Matsuda, Hiroshi*; Gong, W.; Kawasaki, Takuro; Harjo, S.; Umezawa, Osamu*

Scripta Materialia, 236, p.115648_1 - 115648_5, 2023/11

https://doi.org/10.1016/j.scriptamat.2023.115648

RF design of the prototype spoke cavity for the JAEA-ADS linac

Tamura, Jun; Kondo, Yasuhiro; Yee-Rendon, B.; Meigo, Shinichiro; Maekawa, Fujio; Hasegawa, Kazuo; Kako, Eiji*; Umemori, Kensei*; Sakai, Hiroshi*; Konomi, Taro*

JPS Conference Proceedings (Internet), 33, p.011049_1 - 011049_6, 2021/03

https://doi.org/10.7566/JPSCP.33.011049

Simulation study of the effects of buildings, trees and paved surfaces on ambient dose equivalent rates outdoors at three suburban sites near Fukushima Dai-ichi

Kim, M.; Malins, A.; Yoshimura, Kazuya; Sakuma, Kazuyuki; Kurikami, Hiroshi; Kitamura, Akihiro; Machida, Masahiko; Hasegawa, Yukihiro*; Yanagi, Hideaki*

Journal of Environmental Radioactivity, 210, p.105803_1 - 105803_10, 2019/12

https://doi.org/10.1016/j.jenvrad.2018.09.001

To improve the accuracy of simulations for air dose rates over fallout contaminated areas, the distribution of the radionuclides within the environment should be modelled realistically, e.g. considering differences in radioactivity levels between agricultural land, urban surfaces, and forest compartments. Moreover simulations should model the shielding of rays by buildings, trees and land topography. Here we outline a system for generating three dimensional models of urban and rural areas in Fukushima Prefecture. The Cs and Cs radioactivity distribution can be set flexibly across the different components of the model. The models incorporate realistic representations of local buildings, based on nine common Japanese designs, individual conifer and broadleaf trees, and the topography of the land surface. Models are generated from Digital Elevation Model (DEM) and Digital Surface Model (DSM) datasets, and refined by users assisted with ortho-photographs of target sites. Completed models are exported from the system in a format suitable for the Particle and Heavy Ion Transport code System (PHITS) for the calculation of air dose rates and other radiological quantities. The system is demonstrated by modelling a suburban area 4 km from the Fukushima Daiichi Nuclear Power Plant that has yet to be decontaminated. Air dose rates calculated in PHITS were correlated with measurements taken across the site in a car-borne survey.

Recovery of helium refrigerator performance for cryogenic hydrogen system at J-PARC MLF

Aso, Tomokazu; Teshigawara, Makoto; Hasegawa, Shoichi; Muto, Hideki; Aoyagi, Katsuhiro; Nomura, Kazutaka; Takada, Hiroshi

Journal of Physics; Conference Series, 1021(1), p.012085_1 - 012085_4, 2018/06

BB2016-1899.pdf:0.54MB

https://doi.org/10.1088/1742-6596/1021/1/012085

An Evaluation of the long-term stagnancy of porewater in the neogene sedimentary rocks in northern Japan

Nakata, Kotaro*; Hasegawa, Takuma*; Oyama, Takahiro*; Ishii, Eiichi; Miyakawa, Kazuya; Sasamoto, Hiroshi

Geofluids, 2018, p.7823195_1 - 7823195_21, 2018/01

https://doi.org/10.1155/2018/7823195

A groundwater scenario is one of the scenario for safety assessment of geological disposal of high-level radioactive waste. In the safety assessment for groundwater scenario, the slow groundwater flow for a long-term should be an important factor. In the present study, study on stability of groundwater in the Koetoi and Wakkanai formations of Neogene marine based sedimentary rock at the Horonobe area, Hokkaido was performed by investigating the isotopes of chlorine and helium, and the stable isotopes of water. As the results, the stability of groundwater in deeper part of the Wakkanai formation was suggested due to no direct evidence of meteoric water intrusion during the uplift since ca. 1 Ma. Contrary, the groundwater both in the Koetoi formation and the upper Wakkanai formation would be unstable because the meteoric water intrusion was suggested by paleohydrogeological condition and the results of groundwater dating. Likely the Horonobe area, the accurate dating of groundwater would be difficult due to the complex effects of upward and mixing water derived from diagenesis in the thick sediment formation. However, a comparative procedure using both the results of groundwater dating and paleohydrogeological information would be useful for general evaluation of groundwater flow conditions for the long-term (i.e., check the possibility for long-term stability of groundwater).

Studies of high density baryon matter with high intensity heavy-ion beams at J-PARC

Sako, Hiroyuki; Harada, Hiroyuki; Sakaguchi, Takao*; Chujo, Tatsuya*; Esumi, Shinichi*; Gunji, Taku*; Hasegawa, Shoichi; Hwang, S.; Ichikawa, Yudai; Imai, Kenichi; et al.

Nuclear Physics A, 956, p.850 - 853, 2016/12

https://doi.org/10.1016/j.nuclphysa.2016.03.030

Ion-track grafting of vinylbenzyl chloride into poly(ethylene--tetrafluoroethylene) films using different media

Nuryanthi, N.*; Yamaki, Tetsuya; Kitamura, Akane; Koshikawa, Hiroshi; Yoshimura, Kimio; Sawada, Shinichi; Hasegawa, Shin; Asano, Masaharu; Maekawa, Yasunari; Suzuki, Akihiro*; et al.

Transactions of the Materials Research Society of Japan, 40(4), p.359 - 362, 2015/12

http://doi.org/10.14723/tmrsj.40.359

The ion-track grafting of a vinylbenzyl chloride (VBC) into a poly(ethylene-co-tetrafluoroethylene) (ETFE) film is necessary for preparing nanostructured hydroxide-ion-conductive electrolyte membranes. A key for success here is to obtain as high graft levels as possible (for higher conductivity) in a smaller number of tracks (for improving the other membrane properties). To this end, therefore, the effect of the medium for the VBC grafting was investigated as part of our continuing effort to optimize the experimental conditions. A 25 m-thick ETFE film was irradiated in a vacuum chamber with 560 MeV Xe at different fluences, and then the grafting was performed by immersing the irradiated films in a 20vol% VBC monomer at 60C. A medium was a mixture of water (HO) and isopropyl alcohol (iPrOH) at different volume ratios. The degree of grafting increased as the HO content became higher, and reached a maximum in pure HO. These results can be explained by considering the well-known Trommsdorff effect, in which poor solubility of the grafted polymer in polar media leads to an increased polymerization rate probably due to a lower termination rate.

Development of stress intensity factors for surface cracks with large aspect ratio in plates

Li, Y.; Hasegawa, Kunio; Katsumata, Genshichiro; Osakabe, Kazuya*; Okada, Hiroshi*

Journal of Pressure Vessel Technology, 137(5), p.051207_1 - 051207_8, 2015/10

https://doi.org/10.1115/1.4030026

A number of surface cracks with large aspect ratio have been detected in components of nuclear power plants in recent years. The depths of these cracks are even larger than the half of crack lengths. However, the solutions of the stress intensity factor were not provided for semi-elliptical surface cracks with large aspect ratio in the current fitness-for-service codes. In this study, in order to conduct integrity assessment for cracked components, the solutions of the stress intensity factor were calculated using finite element analysis for semi-elliptical surface cracks with large aspect ratio in plates. Solutions were provided at both the deepest and the surface points of the surface cracks. Some of solutions were compared with the available existing results. As the result, it was concluded that the solutions proposed in this paper are applicable in engineering applications.

Fabrication process qualification of TF Insert Coil using real ITER TF conductor

Ozeki, Hidemasa; Isono, Takaaki; Kawano, Katsumi; Saito, Toru; Kawasaki, Tsutomu; Nishino, Katsumi; Okuno, Kiyoshi; Kido, Shuichi*; Semba, Tomoyuki*; Suzuki, Yozo*; et al.

IEEE Transactions on Applied Superconductivity, 25(3), p.4200804_1 - 4200804_4, 2015/06

https://doi.org/10.1109/TASC.2014.2364393

Beam test of a new radio frequency quadrupole linac for the Japan Proton Accelerator Research Complex

Kondo, Yasuhiro; Morishita, Takatoshi; Yamazaki, Saishun; Hori, Toshihiko; Sawabe, Yuki; Chishiro, Etsuji; Fukuda, Shimpei; Hasegawa, Kazuo; Hirano, Koichiro; Kikuzawa, Nobuhiro; et al.

Physical Review Special Topics; Accelerators and Beams, 17(12), p.120101_1 - 120101_8, 2014/12

https://doi.org/10.1103/PhysRevSTAB.17.120101

We performed a beam test of a new radio frequency quadrupole linac (RFQ III) for the beam current upgrade of the Japan Proton Accelerator Research Complex. First, the conditioning of RFQ III was conducted, and after 20 h of conditioning, RFQ III became very stable with a nominal peak power and duty factor of 400 kW and 1.5%, respectively. An off-line beam test was subsequently conducted before installation in the accelerator tunnel. The transmission, transverse emittance, and energy spread of the 50-mA negative hydrogen beam from RFQ III were measured and compared with simulation results. The experiment and simulation results showed good agreement; therefore, we conclude that the performance of RFQ III conforms to its design.