Application of CFD code with debris-bed coolability assessment model to pool Type SFR

Nakamura, Hironori*; Hayakawa, Satoshi*; Shibata, Akihiro*; Sasa, Kyohei*; Yamano, Hidemasa; Kubo, Shigenobu

Proceedings of 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12) (Internet), 7 Pages, 2022/10

In order to evaluate long-term coolablity of the debris-bed with decay heat, a three-dimensional calculation method coupled with the debris bed module was developed in this study. The coupled code calculation results show that natural circulation of the coolant between the hot pool and the cold pool is established through the four intermediate heat exchangers after the activation of the dipped direct heat exchangers. The cold pool with the debris-bed is continually cooled not only by the natural circulation flow, but also by heat transfer to the hot pool through the plenum separation plate between the hot pool and the cold pool. The effect of the three-dimensional flow field around the core catcher on the temperature in the debris-bed is about 20K under the current calculation condition.

Molecular dynamic simulations evaluating the effect of the stacking fault energy on defect formations in face-centered cubic metals subjected to high-energy particle irradiation

Terayama, Satoshi*; Iwase, Yuki*; Hayakawa, Sho*; Okita, Taira*; Itakura, Mitsuhiro; Suzuki, Katsuyuki*

Computational Materials Science, 195, p.110479_1 - 110479_12, 2021/07

https://doi.org/10.1016/j.commatsci.2021.110479

Thermally altered subsurface material of asteroid (162173) Ryugu

Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

https://doi.org/10.1038/s41550-020-01271-2

Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.

Proposal for selective isotope transmutation of long-lived fission products using quasi-monochromatic -ray beams

Hayakawa, Takehito; Miyamoto, Shuji*; Hajima, Ryoichi; Shizuma, Toshiyuki; Amano, So*; Hashimoto, Satoshi*; Misawa, Tsuyoshi*

Journal of Nuclear Science and Technology, 53(12), p.2064 - 2071, 2016/12

https://doi.org/10.1080/00223131.2016.1194776

We have proposed a new selective isotope transmutation method using photonuclear reactions with quasi-monochromatic -ray beams. This method is based on the fact that the particle threshold of a long-lived fission product (LLFP) such as Zr, Pd, or Se is lower than those of stable isotopes of the same chemical element. Therefore, this method has an excellent advantage that LLFPs cannot, in principle, be produced newly even if the target materials include stable isotopes in addition to a LLFP. Laser Compton scattering -ray sources and neutron capture -rays in nuclear reactors are candidates for this method.

Spatial anisotropy of neutrons emitted from the Fe(, n)Fe reaction with a linearly polarized -ray beam

Hayakawa, Takehito; Shizuma, Toshiyuki; Miyamoto, Shuji*; Amano, Sho*; Takemoto, Akinori*; Yamaguchi, Masashi*; Horikawa, Ken*; Akimune, Hidetoshi*; Chiba, Satoshi*; Ogata, Kazuyuki*; et al.

Physical Review C, 93(4), p.044313_1 - 044313_4, 2016/04

https://doi.org/10.1103/PhysRevC.93.044313

We have measured the azimuthal anisotropy of neutrons emitted from the Fe(, n)Fe reaction with a linearly polarized ray beam generated by laser Compton scattering at NewSUBARU. Neutron yields at the polar angle of 90 have been measured as a function of the azimuthal angle between the detector and the linear polarization plane of the ray beam. The azimuthal anisotropy of neutrons measured at seven angles has been well reproduced using a theoretically predicted function of + cos(2).

Supernova neutrino nucleosynthesis of the radioactive Nb observed in primitive meteorites

Hayakawa, Takehito; Nakamura, Ko*; Kajino, Toshitaka*; Chiba, Satoshi; Iwamoto, Nobuyuki; Cheoun, M. K.*; Mathews, G. J.*

Astrophysical Journal Letters, 779(1), p.L9_1 - L9_5, 2013/12

https://doi.org/10.1088/2041-8205/779/1/L9

Short-lived radioactivities are used as nuclearcosmochronometers for understanding the free decay time from the last nucleosynthesis episode until the time of solar system formation (SSF). Nb (half-life of 34.7 Myr) is one of a short-lived isotope existed at SSF. However, there is a controversy in that the inferred initial abundance ratios for Nb/Nb at the time of SSF cluster around two different values; one is near 10, while the other is near 10. Moreover, the astrophysical mechanism for the synthesis of Nb has remained an unsolved problem. Here we argue that conventional nucleosynthesis mechanisms cannot produce Nb and propose a new mechanism for the nucleosynthesis of this isotopebased upon neutrino induced reactions occurring during core-collapse supernova explosions.

Development of basic NDA technologies of nuclear material accountancy of debris of melted fuel formed in severe accidents

Seya, Michio; Harada, Hideo; Kitatani, Fumito; Koizumi, Mitsuo; Tsuchiya, Harufumi; Iimura, Hideki; Kureta, Masatoshi; Takamine, Jun; Hajima, Ryoichi; Hayakawa, Takehito; et al.

Kaku Busshitsu Kanri Gakkai (INMM) Nihon Shibu Dai-34-Kai Nenji Taikai Rombunshu (Internet), 10 Pages, 2013/10

The forming of MF in severe accidents of nuclear reactors such as Units 1 - 3 of Fukushima-Daiichi NPP (Nuclear Power Plant) inevitably change the category of the nuclear reactor from "item facility" to "bulk-handling facility". At removal of the MF it is necessary to break chunks of MF into relatively small blocks by using some tools, resulting in debris that consists of cut or small rock-like debris and particle (or grain)-like debris in bulk form. This paper presents a categorization of debris of MF and two possible non-destructive assay (NDA) technologies for precise measurement which could be applied to the NM accountancy of MF debris. One of them is Neutron Resonance Densitometry (NRD) for particle-like (or grain-like) debris, and another is NRF (Nuclear Resonance Fluorescence) NDA using LCS (Laser Compton Scattered) -rays (mono-energetic -rays) for cut or small rock-like debris. The paper also describes about the recent development of these two technologies.

Development of flow-induced vibration evaluation methodology based on unsteady fluid flow analysis for large diameter pipe with elbow in JSFR

Hayakawa, Satoshi*; Ishikura, Shuichi*; Watanabe, Osamu*; Kaneko, Tetsuya*; Yamano, Hidemasa; Tanaka, Masaaki

Proceedings of 8th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-8) (USB Flash Drive), 10 Pages, 2012/12

The present methodology was applied to the analysis for the 1/3-scale experiment of the hot-leg pipe of JSFR, and the predicted stress values were compared with the measured stress values. The predicted stress values were underestimated in the case of using the intact pressure fluctuations obtained by the unsteady fluid flow analysis. Therefore, the improvement of the prediction accuracy of the pressure fluctuations on the pipe wall was attempted.

Effect of swirl inflow on flow pattern and pressure fluctuation onto a single-elbow pipe in Japan Sodium-cooled Fast Reactor

Yamano, Hidemasa; Sago, Hiromi*; Hirota, Kazuo*; Hayakawa, Satoshi*; Xu, Y.*; Tanaka, Masaaki; Sakai, Takaaki

Journal of Fluid Science and Technology (Internet), 7(3), p.329 - 344, 2012/09

https://doi.org/10.1299/jfst.7.329

As part of the development of a flow-induced vibration evaluation methodology for the primary cooling piping in Japan Sodium-cooled Fast Reactor, important factors were discussed in evaluating the flow-induced vibration for the hot-leg piping. To investigate a complex flow near the inlet of the hot-leg piping, a reactor scale numerical analysis was carried out for the reactor upper plenum flow, which was simulated in a 1/10-scale reactor upper plenum experiment. Based on this analysis, experimental conditions on swirl inflow and deflected inflow that were identified as important factors were determined for flow-induced vibration experiments simulating only the hot-leg piping. In this study, the effect of the swirl inflow on flow pattern and pressure fluctuation onto the pipe wall was investigated in a 1/3-scale hot-leg pipe experiment. The experiment has indicated less significant for the pressure fluctuations, while the flow separation region was slightly influenced by the swirl flow. Computational fluid dynamics simulation results also appear in this paper, focusing on its applicability to the hot-leg piping experiments.

Complementary characterization of radioactivity produced by repetitive laser-driven proton beam using shot-to-shot proton spectral measurement and direct activation measurement

Ogura, Koichi; Shizuma, Toshiyuki; Hayakawa, Takehito; Yogo, Akifumi; Nishiuchi, Mamiko; Orimo, Satoshi; Sagisaka, Akito; Pirozhkov, A. S.; Mori, Michiaki; Kiriyama, Hiromitsu; et al.

Japanese Journal of Applied Physics, 51(4), p.048003_1 - 048003_2, 2012/04

https://doi.org/10.1143/JJAP.51.048003

A proton beam driven by a repetitive high-intensity-laser is utilized to induce a Li(p,n)Be nuclear reaction. The total activity of Be are evaluated by two different methods. The activity obtained measuring the decay -rays after 1912 shots at 1 Hz is 1.70.2 Bq. This is in good agreement with 1.60.3 Bq evaluated from the proton energy distribution measured using a time-of-flight detector and the nuclear reaction cross-sections. We conclude that the production of activity can be monitored in real time using the time-of-flight-detector placed inside a diverging proton beam coupled with a high-speed signal processing system.