Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
D
measured with inelastic neutron spectroscopyYamaura, Junichi*; Hiraka, Haruhiro*; Iimura, Soshi*; Muraba, Yoshinori*; Bang, J.*; Ikeuchi, Kazuhiko*; Nakamura, Mitsutaka; Inamura, Yasuhiro; Honda, Takashi*; Hiraishi, Masatoshi*; et al.
Physical Review B, 99(22), p.220505_1 - 220505_6, 2019/06
Times Cited Count：3 Percentile：16.31(Materials Science, Multidisciplinary)Inelastic neutron scattering was performed for an iron-based superconductor, where most of D (deuterium) replaces oxygen, while a tiny amount goes into interstitial sites. By first-principle calculation, we characterize the interstitial sites for D (and for H slightly mixed) with four equivalent potential minima. Below the superconducting transition temperature Tc = 26 K, new excitations emerge in the range 5-15 meV, while they are absent in the reference system LaFeAsOF. The strong excitations at 14.5 meV and 11.1 meV broaden rapidly around 15 K and 20 K, respectively, where each energy becomes comparable to twice of the superconducting gap. The strong excitations are ascribed to a quantum rattling, or a band motion of hydrogen, which arises only if the number of potential minima is larger than two.
filament arc-driven multi-cusp ion source for iBNCTShibata, Takanori*; Takagi, Akira*; Ikegami, Kiyoshi*; Sugimura, Takashi*; Nammo, Kesao*; Naito, Fujio*; Kobayashi, Hitoshi*; Kurihara, Toshikazu*; Honda, Yosuke*; Sato, Masaharu*; et al.
Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.385 - 387, 2018/10
SiTakeuchi, Tetsuya*; Yara, Tomoyuki*; Ashitomi, Yosuke*; Iha, Wataru*; Kakihana, Masashi*; Nakashima, Miho*; Amako, Yasushi*; Honda, Fuminori*; Homma, Yoshiya*; Aoki, Dai*; et al.
Journal of the Physical Society of Japan, 87(7), p.074709_1 - 074709_14, 2018/07
Times Cited Count：12 Percentile：64.96(Physics, Multidisciplinary)(Ge
Si
) based on the doniach phase diagramIha, Wataru*; Yara, Tomoyuki*; Ashitomi, Yosuke*; Kakihana, Masashi*; Takeuchi, Tetsuya*; Honda, Fuminori*; Nakamura, Ai*; Aoki, Dai*; Gochi, Jun*; Uwatoko, Yoshiya*; et al.
Journal of the Physical Society of Japan, 87(6), p.064706_1 - 064706_14, 2018/06
Times Cited Count：19 Percentile：75.67(Physics, Multidisciplinary)Nakajima, Kenji; Kawakita, Yukinobu; Ito, Shinichi*; Abe, Jun*; Aizawa, Kazuya; Aoki, Hiroyuki; Endo, Hitoshi*; Fujita, Masaki*; Funakoshi, Kenichi*; Gong, W.*; et al.
Quantum Beam Science (Internet), 1(3), p.9_1 - 9_59, 2017/12
The neutron instruments suite, installed at the spallation neutron source of the Materials and Life Science Experimental Facility (MLF) at the Japan Proton Accelerator Research Complex (J-PARC), is reviewed. MLF has 23 neutron beam ports and 21 instruments are in operation for user programs or are under commissioning. A unique and challenging instrumental suite in MLF has been realized via combination of a high-performance neutron source, optimized for neutron scattering, and unique instruments using cutting-edge technologies. All instruments are/will serve in world-leading investigations in a broad range of fields, from fundamental physics to industrial applications. In this review, overviews, characteristic features, and typical applications of the individual instruments are mentioned.
Ono, Masato; Fujiwara, Yusuke; Honda, Yuki; Sato, Hiroyuki; Shimazaki, Yosuke; Tochio, Daisuke; Homma, Fumitaka; Sawahata, Hiroaki; Iigaki, Kazuhiko; Takada, Shoji
Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 5 Pages, 2017/04
Japan Atomic Energy Agency (JAEA) has carried out research and developments towards nuclear heat utilization of High Temperature Gas-cooled Reactor (HTGR) using High Temperature Engineering Test Reactor (HTTR). The nuclear heat utilization systems connected to HTGR will be designed on the basis of non-nuclear-grade standards in terms of easier entry for the chemical plant companies and the construction economics of the systems. Therefore, it is necessary that the reactor operations continue even if abnormal events occur in the systems. Heat application system abnormal simulating test with HTTR was carried out in non-nuclear heating operation to focus on the thermal effect in order to obtain data of the transient temperature behavior of the metallic components in the Intermediate Heat Exchanger (IHX). The IHX is the key components to connect the HTTR with the heat application system. In the test, the coolant helium gas temperature was heated up to 120
C by the compression heat of the gas circulators in the HTTR under the ideal condition to focus on the heat transfer. The tests were conducted by decreasing the helium gas temperature stepwise by increasing the mass flow rate to the air cooler. The temperature responses of the IHX were investigated. For the components such as the heat transfer tubes and heat transfer enhancement plates of IHX, the temperature response was slower in the lower position in comparison with the higher position. The reason is considered that thermal load fluctuation is imposed in the secondary helium gas which flows from the top to the bottom in the heat transfer tubes of the IHX. The test data are useful to verify the numerical model of the safety evaluation code.
Naito, Fujio*; Anami, Shozo*; Ikegami, Kiyoshi*; Uota, Masahiko*; Ouchi, Toshikatsu*; Onishi, Takahiro*; Oba, Toshiyuki*; Obina, Takashi*; Kawamura, Masato*; Kumada, Hiroaki*; et al.
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1244 - 1246, 2016/11
The proton linac installed in the Ibaraki Neutron Medical Research Center is used for production of the intense neutron flux for the Boron Neutron Capture Therapy (BNCT). The linac consists of the 3-MeV RFQ and the 8-MeV DTL. Design average beam current is 10mA. Target is made of Beryllium. First neutron production from the Beryllium target was observed at the end of 2015 with the low intensity beam as a demonstration. After the observation of neutron production, a lot of improvement s was carried out in order to increase the proton beam intensity for the real beam commissioning. The beam commissioning has been started on May 2016. The status of the commissioning is summarized in this report.
Shimazaki, Yosuke; Sawahata, Hiroaki; Kawamoto, Taiki; Suzuki, Hisashi; Shinohara, Masanori; Honda, Yuki; Katsuyama, Kozo; Takada, Shoji; Sawa, Kazuhiro
Journal of Nuclear Engineering and Radiation Science, 2(4), p.041008_1 - 041008_5, 2016/10
Maintenance technologies for the reactor system have been developed by using the high-temperature engineering test reactor (HTTR). One of the important purposes of development is to accumulate the experiences and data to satisfy the availability of operation up to 90% by shortening the duration of the periodical maintenance for the future HTGRs by shifting from the time-based maintenance to condition-based maintenance. The technical issue of the maintenance of in-core neutron detector, wide range monitor (WRM), is to predict the malfunction caused by cable disconnection to plan the replacement schedule. This is because that it is difficult to observe directly inside of the WRM in detail. The electrical inspection method was proposed to detect and predict the cable disconnection of the WRM by remote monitoring from outside of the reactor by using the time domain reflectometry and so on. The disconnection position, which was specified by the electrical method, was identified by non-destructive and destructive inspection. The accumulated data is expected to be contributed for advanced maintenance of future HTGRs.
Simanullang, I. L.*; Honda, Yuki; Fukaya, Yuji; Goto, Minoru; Shimazaki, Yosuke; Fujimoto, Nozomu*; Takada, Shoji
JAEA-Technology 2015-032, 26 Pages, 2016/01
JAEA-Technology-2015-032.pdf:2.07MB
Decay heat of the High Temperature Engineering Test Reactor had been evaluated by the Shure Equation and/or ORIGEN code based on the LWR's data. However, to evaluate more accurately, a suitable method must be considered because of the differences neutron spectrums from the LWRs. Therefore, the decay heat and the generated nuclides for the neutron spectrums of the core with different graphite moderator amount were calculated by the ORIGEN2 code. As a result, it is clear that the calculated decay heats are similar value with LWRs for about one year after the reactor shutdown, and that the significant differences are observed on the longer period affected by the generated nuclides such as 
Y, 
Cs, 
Pr, 
Rh, 
Am etc. It is also clear that the dose is affected by Pu on the initial stage after the reactor shutdown.
Nishimori, Nobuyuki; Nagai, Ryoji; Mori, Michiaki; Hajima, Ryoichi; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Uchiyama, Takashi*; Jin, X.*; Obina, Takashi*; et al.
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.511 - 515, 2015/09
no abstracts in English
Nagai, Ryoji; Hajima, Ryoichi; Shizuma, Toshiyuki; Mori, Michiaki; Akagi, Tomoya*; Kosuge, Atsushi*; Honda, Yosuke*; Araki, Sakae*; Terunuma, Nobuhiro*; Urakawa, Junji*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1328 - 1330, 2015/09
Accelerator and laser technologies required for laser Compton scattering (LCS) photon source based on an energy-recovery linac (ERL) have been developed at the Compact ERL (cERL) facility. A high-flux, energy tunable, and monochromatic photon source such as the ERL-based LCS photon source is necessary for nondestructive assay of nuclear materials. For the demonstration of the ERL-based LCS photon generation, a laser enhancement cavity was installed at the recirculation loop of the cERL. The electron beam energy, the laser wavelength, and the collision angle are 20 MeV, 1064 nm, and 18 , respectively. The calculated maximum energy of the LCS photons is about 7 keV. A silicon drift detector (SDD) with active area of 17 mm
placed 16.6 m from the collision point was used for observation of the LCS photons. As a result of the measurement, the flux on the detector, central energy, and energy width of the LCS photons were obtained as 1200/s, 6.91 keV, and 81 eV, respectively.
Nagai, Ryoji; Hajima, Ryoichi; Mori, Michiaki; Shizuma, Toshiyuki; Akagi, Tomoya*; Araki, Sakae*; Honda, Yosuke*; Kosuge, Atsushi*; Terunuma, Nobuhiro*; Urakawa, Junji*
Proceedings of 6th International Particle Accelerator Conference (IPAC '15) (Internet), p.1607 - 1609, 2015/06
Accelerator and laser technologies required for laser Compton scattering (LCS) photon source based on an energy-recovery linac (ERL) have been developed at the Compact ERL (cERL) facility. A high-flux, energy tunable, and monochromatic photon source such as the ERL-based LCS photon source is necessary for nondestructive assay of nuclear materials. For the demonstration of the ERL-based LCS photon generation, a laser enhancement cavity was installed at the recirculation loop of the cERL. The electron beam energy, the laser wavelength, and the collision angle are 20 MeV, 1064 nm, and 18 deg., respectively. The calculated maximum energy of the LCS photons is about 7 keV. A silicon drift detector (SDD) with active area of 17 mm placed 16.6 m from the collision point was used for observation of the LCS photons. As a result of the measurement, the flux on the detector, central energy, and energy width of the LCS photons were obtained as 1200 /s, 6.91 keV, and 81 eV, respectively.
Shimazaki, Yosuke; Sawahata, Hiroaki; Kawamoto, Taiki; Suzuki, Hisashi; Shinohara, Masanori; Honda, Yuki; Katsuyama, Kozo; Takada, Shoji; Sawa, Kazuhiro
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 7 Pages, 2015/05
Maintenance technologies for the reactor system have been developed by using the high-temperature engineering test reactor (HTTR). One of the important purposes of development is to accumulate the experiences and data to satisfy the availability of operation up to 90% by shortening the duration of the periodical maintenance for the future HTGRs by shifting from the time-based maintenance to condition-based maintenance. The technical issue of the maintenance of in-core neutron detector, wide range monitor (WRM), is to predict the malfunction caused by cable disconnection to plan the replacement schedule. This is because that it is difficult to observe directly inside of the WRM in detail. The electrical inspection method was proposed to detect and predict the cable disconnection of the WRM by remote monitoring from outside of the reactor by using the time domain reflectometry and so on. The disconnection position, which was specified by the electrical method, was identified by non-destructive and destructive inspection. The accumulated data is expected to be contributed for advanced maintenance of future HTGRs.
-ray generationNishimori, Nobuyuki; Nagai, Ryoji; Matsuba, Shunya; Hajima, Ryoichi; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Uchiyama, Takashi*; Kuriki, Masao*
Nuclear Physics and -ray sources for Nuclear Security and Nonproliferation, p.321 - 326, 2014/12
Nagai, Ryoji; Hajima, Ryoichi; Mori, Michiaki; Shizuma, Toshiyuki; Akagi, Tomoya*; Kosuge, Atsushi*; Honda, Yosuke*; Urakawa, Junji*
Proceedings of 11th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1328 - 1331, 2014/10
A high intensity -ray source from the laser Compton scattering (LCS) by an electron beam in an energy-recovery linac (ERL) is a key technology for a nondestructive assay system to identify nuclear materials. In order to demonstrate accelerator and laser technologies required for a LCS photon generation, a LCS photon source is under construction at the Compact ERL (cERL). The LCS photon source consists of a mode-locked fiber laser and a laser enhancement cavity. A beamline and an experimental hatch are also under construction. The commissioning of the LCS photon source will be started in February 2015 and LCS photon generation is scheduled in March 2015.
Nagai, Ryoji; Hajima, Ryoichi; Mori, Michiaki; Shizuma, Toshiyuki; Akagi, Tomoya*; Kosuge, Atsushi*; Honda, Yosuke*; Urakawa, Junji*
Proceedings of 11th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.839 - 842, 2014/10
In order to demonstrate accelerator and laser technologies required for a laser Compton scattering (LCS) photon generation, a LCS photon source is under construction at the Compact ERL (cERL). We considered the flux monitors for the adjustment LCS photon source. A thin scintillator detector and a silicon drift detector are employed as flux monitors and are installed at the upstream part of the LCS beamline. The background signal level due to the bremsstrahlung of the electron beam was measured by a CsI(pure) scintillator. In the result of the measurement, the background signal is acceptable level for the flux monitors.
Hwang, J.-G.*; Kim, E.-S.*; Miyajima, Tsukasa*; Honda, Yosuke*; Harada, Kentaro*; Shimada, Miho*; Takai, Ryota*; Kume, Tatsuya*; Nagahashi, Shinya*; Obina, Takashi*; et al.
Nuclear Instruments and Methods in Physics Research A, 753, p.97 - 104, 2014/07
Times Cited Count：7 Percentile：48.36(Instruments & Instrumentation)Nagai, Ryoji; Hajima, Ryoichi; Mori, Michiaki; Shizuma, Toshiyuki; Akagi, Tomoya*; Honda, Yosuke*; Kosuge, Atsushi*; Urakawa, Junji*
Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.1940 - 1942, 2014/07
In order to demonstrate required accelerator and laser technologies for a high intensity -ray source from the laser Compton scattering (LCS), an LCS photon source and the peripheral equipment are under construction at the Compact ERL (cERL) at High Energy Accelerator Research Organization (KEK). The LCS photon source by an electron beam in the energy-recovery linac (ERL) is a key technology for a nondestructive assay system to identify nuclear species. The LCS photon source and the peripheral equipment consist of a mode-locked fiber laser, laser enhancement cavity, beamline, and experimental hatch. The commissioning of the LCS photon source will be started in February 2015.
Nishimori, Nobuyuki; Nagai, Ryoji; Matsuba, Shunya; Hajima, Ryoichi; Yamamoto, Masahiro*; Miyajima, Tsukasa*; Honda, Yosuke*; Uchiyama, Takashi*; Iijima, Hokuto*; Kuriki, Masao*; et al.
Proceedings of 10th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.174 - 178, 2014/06
no abstracts in English
500 kVNishimori, Nobuyuki; Nagai, Ryoji; Matsuba, Shunya; Hajima, Ryoichi; Yamamoto, Masahiro*; Honda, Yosuke*; Miyajima, Tsukasa*; Iijima, Hokuto*; Kuriki, Masao*; Kuwahara, Makoto*
Physical Review Special Topics; Accelerators and Beams, 17(5), p.053401_1 - 053401_17, 2014/05
Times Cited Count：23 Percentile：80.23(Physics, Nuclear)