Refine your search:     
Report No.
 - 
Search Results: Records 1-20 displayed on this page of 132

Presentation/Publication Type

Initialising ...

Refine

Journal/Book Title

Initialising ...

Meeting title

Initialising ...

First Author

Initialising ...

Keyword

Initialising ...

Language

Initialising ...

Publication Year

Initialising ...

Held year of conference

Initialising ...

Save select records

Journal Articles

Experimental identification of electric field excitation mechanisms in a structural transition of tokamak plasmas

Kobayashi, Tatsuya*; Ito, Kimitaka*; Ido, Takeshi*; Kamiya, Kensaku; Ito, Sanae*; Miura, Yukitoshi; Nagashima, Yoshihiko*; Fujisawa, Akihide*; Inagaki, Shigeru*; Ida, Katsumi*; et al.

Scientific Reports (Internet), 6, p.30720_1 - 30720_7, 2016/08

 Times Cited Count:13 Percentile:64.7(Multidisciplinary Sciences)

In this Letter, we report model verifications for a key physics for the L-H transition. Radial electric field excitation, using discharges having a two-step transition. Examining time derivative of Poissons equation, it is found that the sum of the loss cone loss current and neoclassical bulk viscosity current agrees the experimentally observed current in the order of magnitude at the first transition. Following second transition and an ambipolar condition in the L-mode cannot be explained by the models.

Journal Articles

Progress and status of the gyrotron development for the JT-60SA ECH/CD system

Kobayashi, Takayuki; Sawahata, Masayuki; Terakado, Masayuki; Hiranai, Shinichi; Ikeda, Ryosuke; Oda, Yasuhisa; Wada, Kenji; Hinata, Jun; Yokokura, Kenji; Hoshino, Katsumichi; et al.

Proceedings of 40th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2015) (USB Flash Drive), 3 Pages, 2015/08

A gyrotron for electron cyclotron heating and current drive (ECH/CD) has been developed for JT-60SA (Super-Advanced). In high-power, long-pulse operations, oscillations of 1 MW/100 s have been demonstrated at both 110 GHz and 138 GHz, for the first time. These results fully satisfied the requirements for JT-60SA. Moreover, it was experimentally shown that the higher power operation at each frequency is expected to be acceptable for this gyrotron from the viewpoint of heat load at the cavity resonator, collector, and stray radiation absorbers. An oscillation at 82 GHz, which is an additional frequency, has been demonstrated up to 2 s at the output power of 0.4 MW, so far. High power experiments toward higher power of 1.5 MW (110/138 GHz) and 1 MW (82 GHz) are ongoing.

Journal Articles

Gyrotron development for high-power, long-pulse electron cyclotron heating and current drive at two frequencies in JT-60SA and its extension toward operation at three frequencies

Kobayashi, Takayuki; Moriyama, Shinichi; Yokokura, Kenji; Sawahata, Masayuki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Hoshino, Katsumichi; et al.

Nuclear Fusion, 55(6), p.063008_1 - 063008_8, 2015/06

 Times Cited Count:24 Percentile:77.85(Physics, Fluids & Plasmas)

A gyrotron enabling high-power, long-pulse oscillations at both 110 GHz and 138 GHz has been developed for electron cyclotron heating (ECH) and current drive (CD) in JT-60SA. Oscillations of 1 MW for 100 s have been demonstrated at both frequencies, for the first time as a gyrotron operating at two frequencies. The optimization of the anode voltage, or the electron pitch factor, using a triode gun was a key to obtain high power and high efficiency at two frequencies. It was also confirmed that the internal losses in the gyrotron were sufficiently low for expected long pulse operation at the higher power level of $$sim$$1.5 MW. Another important result is that an oscillation at 82 GHz, which enables to use fundamental harmonic waves in JT-60SA while the other two frequencies are used as second harmonics waves, was demonstrated up to 0.4 MW for 2 s. These results of the gyrotron development significantly contribute to enhancing operation regime of the ECH/CD system in JT-60SA.

Journal Articles

Development of a dual frequency (110/138 GHz) gyrotron for JT-60SA and its extension to an oscillation at 82 GHz

Kobayashi, Takayuki; Moriyama, Shinichi; Isayama, Akihiko; Sawahata, Masayuki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Yokokura, Kenji; et al.

EPJ Web of Conferences, 87, p.04008_1 - 04008_5, 2015/03

 Times Cited Count:5 Percentile:83.72

A dual-frequency gyrotron, which can generate 110 GHz and 138 GHz waves independently, is being developed in JAEA to enable electron cyclotron heating (ECH) and current drive (ECCD) in a wider range of plasma discharge conditions of JT-60SA. Operation for the gyrotron conditioning and parameter optimization toward 1 MW for 100 s, which is the target output power and pulse length for JT-60SA, is in progress without problems. Oscillations of 1 MW for 10 s and 0.51 MW for 198 s were obtained, so far, at both frequencies. In addition, an oscillation (0.3 MW for 20 ms) at 82 GHz was demonstrated as an additional frequency of the dual-frequency gyrotron which shows a possibility of the use of fundamental harmonic wave in JT-60SA.

Journal Articles

Dynamics of edge limit cycle oscillation in the JFT-2M tokamak

Kobayashi, Tatsuya*; Ito, Kimitaka*; Ido, Takeshi*; Kamiya, Kensaku; Ito, Sanae*; Miura, Yukitoshi; Nagashima, Yoshihiko*; Fujisawa, Akihide*; Inagaki, Shigeru*; Ida, Katsumi*; et al.

Nuclear Fusion, 54(7), p.073017_1 - 073017_14, 2014/07

 Times Cited Count:26 Percentile:77.49(Physics, Fluids & Plasmas)

In the JFT-2M tokamak, limit-cycle oscillation among several variables is observed before L-to-H transition. Spatiotemporal dynamics of the LCO is analyzed in detail. Zonal fows are not seen, and modulation in edge-localized poloidal flow and density gradient is observed. Modulation is also seen in Reynolds stress, caused by that in turbulence intensity and turbulence wavenumber. However, flow acceleration is not able to be explained by the modulation in the Reynolds stress. Rapid inward propagation in density gradient and turbulence packet is also observed. Characteristics of the propagation are veried by means of turbulence spreading theory and diffusion theory.

JAEA Reports

Development of instrument to measure transmission power density distribution using dielectric disk in millimeter waveguide

Yokokura, Kenji; Moriyama, Shinichi; Kobayashi, Takayuki; Hiranai, Shinichi; Sawahata, Masayuki; Terakado, Masayuki; Hinata, Jun; Wada, Kenji; Sato, Yoshikatsu; Hoshino, Katsumichi; et al.

JAEA-Technology 2014-002, 64 Pages, 2014/03

JAEA-Technology-2014-002.pdf:6.83MB

A new instrument has been developed to measure spatial distribution of power density and total power of the millimeter wave, by measuring temperature rise of dielectric material inserted in the waveguide. For a measurement, a dielectric disk with thermally insulated support is inserted into the few millimeters gap in the waveguide. The disk is heated by the millimeter wave pulse for 0.1$$sim$$0.2 s, and immediately after the pulse, it is pulled up and its temperature distribution is measured by an infrared camera to estimate the spatial power density distribution of the millimeter wave. In the other hand, total transmission power is estimated by the disk temperature reached equilibrium. In the measurement test, deformation of the power density distribution was successfully detected when the mirror angle was intentionally changed in the matching optics unit (MOU) at the waveguide input from the gyrotron. The test result shows that the instrument is effective for both adjustment of MOU without opening the vacuum boundary and to detect any abnormal transmission during operation of the ECH system. The test also shows high reliability of the instrument which stands with 1 MW high power transmission without any arcing or pressure rise in vacuum region. The instrument will be contributed to keep good condition of high power long pulse ECH system by detecting abnormal transmission in the waveguide in operation without open vacuum boundary.

Journal Articles

Development of a linear motion antenna for the JT-60SA ECRF system

Moriyama, Shinichi; Kobayashi, Takayuki; Isayama, Akihiko; Hoshino, Katsumichi; Suzuki, Sadaaki; Hiranai, Shinichi; Yokokura, Kenji; Sawahata, Masayuki; Terakado, Masayuki; Hinata, Jun; et al.

Fusion Engineering and Design, 88(6-8), p.935 - 939, 2013/10

 Times Cited Count:4 Percentile:32.63(Nuclear Science & Technology)

An antenna having a first mirror driven in the linear motion (LM) and a fixed second mirror was proposed for electron cyclotron range of frequency (ECRF) heating and current drive system, to minimize the risk of cooling-water-leakage. Basic mechanical feasibilities of the bellows covering the movable structures of the antenna were previously investigated using a mock-up. This time, a support structure of the shaft has been designed using a metallic sliding bearing with solid lubricant. The sliding bearing can support combination of linear and rotational motions while a ball bearing supports either linear or rotational motion. We have newly installed the sliding bearing into the mock-up. A vacuum pumping test has been carried out paying attention to the influence of the solid lubricant by mass analysis. To design the LM antenna for JT-60SA in detail, heating and current drive characteristics for typical experimental scenarios of JT-60SA has been investigated by calculation.

Journal Articles

Spatiotemporal structures of edge limit-cycle oscillation before L-to-H transition in the JFT-2M tokamak

Kobayashi, Tatsuya*; Ito, Kimitaka*; Ido, Takeshi*; Kamiya, Kensaku; Ito, Sanae*; Miura, Yukitoshi; Nagashima, Yoshihiko*; Fujisawa, Akihide*; Inagaki, Shigeru*; Ida, Katsumi*; et al.

Physical Review Letters, 111(3), p.035002_1 - 035002_5, 2013/07

 Times Cited Count:90 Percentile:94.29(Physics, Multidisciplinary)

In this Letter, we report analyses of spatiotemporal dynamics of turbulence and structure in the limit cycle oscillation that precedes L-to-H transition. Zonal flows are not observed during LCO, and the oscillation is the periodic generations/decays of barrier with edge localized mean flow. Oscillatory Reynolds stress is found too small to accelerate the LCO flow. Changes of the density gradient and turbulence amplitude are found to propagate into the core in a ballistic manner, suggesting a cause of fast change of core transport after H-mode transition.

Journal Articles

Dual frequency ECRF system development for JT-60SA

Kobayashi, Takayuki; Isayama, Akihiko; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Yokokura, Kenji; et al.

Fusion Science and Technology, 63(1T), p.160 - 163, 2013/05

 Times Cited Count:7 Percentile:49.41(Nuclear Science & Technology)

A dual frequency electron cyclotron range of frequency system has been developed for JT-60SA, by which a second frequency (135 $$sim$$ 140 GHz) is generated in addition to the first frequency of 110 GHz. A development of a dual frequency gyrotron is a key to realize the dual frequency system. The second frequency was chosen to be 138 GHz from the above frequency range from the viewpoint of gyrotron design. In order to realize high-power ($$>$$ 1 MW) and long-pulse operation for both frequencies, we designed main components of the gyrotron (the diamond window, cavity resonator and quasi-optical mode converter). We found the optimum parameter set from the parameters of these components, which has discrete characteristics. It was confirmed that the output power higher than 1 MW is obtained for both frequencies as a result of numerical design. Based on the above design, a dual frequency gyrotron was newly fabricated. In the conditioning operation, an output power was obtained as we expected.

Journal Articles

Dual frequency gyrotron development for JT-60SA

Kobayashi, Takayuki; Isayama, Akihiko; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Sato, Yoshikatsu; Hinata, Jun; Yokokura, Kenji; et al.

Proceedings of 37th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2012) (USB Flash Drive), 2 Pages, 2012/09

A new dual frequency (110 GHz and 138 GHz) gyrotron development began for JT-60SA. An output power and efficiency higher than 1 MW and 30% with a peak heat load lower than 1.4 kW/cm$$^{2}$$ were obtained for both frequencies in calculation. High mode conversion efficiencies of the quasioptical mode converter (96.8% for 110 GHz and 98.3% for 138 GHz), which is higher than the previously developed 110 GHz long pulse gyrotron (96.5%), was obtained. The new gyrotron was fabricated and conditioning operation has been started from the middle of June 2012. The gyrotron output power of approximately 200 kW was obtained, so far, as we expected in the design of the gyrotron at low beam current of 10 A and low beam voltage of 75 kV.

Journal Articles

Recent results from the development of the electron cyclotron heating system for JT-60SA toward high-power long-pulse operations

Isayama, Akihiko; Kobayashi, Takayuki; Yokokura, Kenji; Shimono, Mitsugu; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Wada, Kenji; Hinata, Jun; et al.

Plasma and Fusion Research (Internet), 7(Sp.1), p.2405029_1 - 2405029_5, 2012/05

no abstracts in English

Journal Articles

Progress in ECRF antenna development for JT-60SA

Kobayashi, Takayuki; Isayama, Akihiko; Hasegawa, Koichi; Suzuki, Sadaaki; Hiranai, Shinichi; Sato, Fumiaki; Wada, Kenji; Yokokura, Kenji; Shimono, Mitsugu; Sawahata, Masayuki; et al.

Fusion Engineering and Design, 86(6-8), p.763 - 767, 2011/10

 Times Cited Count:6 Percentile:44.45(Nuclear Science & Technology)

Progress of antenna development of the Electron Cyclotron Range of Frequency system for JT-60 SA is presented. Capability of pulse length of 100 s, which requires active cooling for mirrors, and flexibility of beam injection angles in both poloidal and toroidal directions are required for the antenna with high reliability. Mechanical and structural design works of the launcher (antenna and its support with steering structure) based on a linear motion antenna concept are in progress. The key component is a long-stroke bellows which enables to alter poloidal injection angle and a bellows which enables to alter toroidal injection angle. Using a newly fabricated mock-up of the steering structure, it was confirmed that the antenna was mechanically realized for poloidal and toroidal injection angle ranges of -10 to +45$$^{circ}$$ and -15 to +15$$^{circ}$$, respectively. Those angles are consistent with angles required in JT-60SA. The results of thermal and structural analyses are also presented.

Journal Articles

Progress of high-power and long-pulse ECRF system development in JT-60

Kobayashi, Takayuki; Isayama, Akihiko; Yokokura, Kenji; Shimono, Mitsugu; Hasegawa, Koichi; Sawahata, Masayuki; Suzuki, Sadaaki; Terakado, Masayuki; Hiranai, Shinichi; Sato, Fumiaki; et al.

Nuclear Fusion, 51(10), p.103037_1 - 103037_10, 2011/10

 Times Cited Count:19 Percentile:62.63(Physics, Fluids & Plasmas)

A new gyrotron operation technique to increase oscillation efficiency was developed on the JT 60 ECRF system. The electron pitch factor was optimized by controlling anode voltage within 0.1 s after the start of the operation. By applying this technique, the gyrotron output power of 1.5 MW for 4 s was recorded, for the first time. The reduced collector heat load at 1.5 MW operations was reduced by 20% and it will be acceptable for longer pulse operation. A new gyrotron with an improved mode converter was developed in order to demonstrate reduction of the stray radiation which had limited the pulse length. The stray radiation was reduced to 1/3 of that of the original gyrotron. A conditioning operation of the improved gyrotron is proceeding up to 31 s at 1 MW. These progresses significantly contribute to enhancing the high power and long pulse capability of the ECRF system toward JT 60SA.

Journal Articles

Developments of radio frequency heating systems for nuclear fusion

Kobayashi, Takayuki; Moriyama, Shinichi; Isayama, Akihiko; Hoshino, Katsumichi; Sakamoto, Keishi; Takahashi, Koji; Kajiwara, Ken; Oda, Yasuhisa; Kasugai, Atsushi

Denki Gakkai Kenkyukai Shiryo, Genshiryoku Kenkyukai (NE-11-6), p.11 - 15, 2011/09

The developments of radio frequency systems for plasma heating and current drive have been continued for magnetically-confined fusion devices, such as JT-60SA, ITER. The specifications of the systems are shown. Recent progress in the electron cyclotron range of frequency system developments, especially for the JT-60SA, is summarized.

Journal Articles

Development of virtual private network for JT-60SA CAD integration

Oshima, Takayuki; Fujita, Takaaki; Seki, Masami; Kawashima, Hisato; Hoshino, Katsumichi; Shibanuma, Kiyoshi; Verrecchia, M.*; Teuchner, B.*

Journal of Plasma and Fusion Research SERIES, Vol.9, p.620 - 624, 2010/08

For interface control and assembly, the CAD data will be exchanged and integrated in a new Data Base server installed at Naka for JT-60SA, where a common computer network efficiently connected between the Naka site for JAEA and the Garching site for F4E is needed to be established. To ensure the design environments, a VPN (Virtual Private Network) was introduced with CAD LAN on computer network physically-separated from JAEA intranet area and firewall. In July 2009, a new VPN connection between the Naka and Garching sites has been successfully demonstrated using IPSec-VPN technology with a commercial and cost-effective firewall/router for security. The VPN technology would provide a common platform for the development of remote experimentation techniques on JT-60SA between Rokkasho and Naka in collaboration with activities of the ITER Remote Experimentation Centre for the IFERC Project at Rokkasho.

Journal Articles

Basic concept of JT-60SA tokamak assembly

Shibanuma, Kiyoshi; Arai, Takashi; Kawashima, Hisato; Hoshino, Katsumichi; Hoshi, Ryo; Kobayashi, Kaoru; Sawai, Hiroaki; Masaki, Kei; Sakurai, Shinji; Shibama, Yusuke; et al.

Journal of Plasma and Fusion Research SERIES, Vol.9, p.276 - 281, 2010/08

The JT-60 SA project is a combined project of JA-EU satellite tokamak program under the Broader Approach (BA) agreement and JA domestic program. Major components of JT-60SA for assembly are vacuum vessel (VV), superconducting coils (TF coils, EF coils and CS coil), in-vessel components such as divertor, thermal shield and cryostat. An assembly frame (with the dedicated cranes), which is located around the tokamak, is adopted to carry out effectively the assembly of tokamak components in the tokamak hall, independently of the facility cranes in the building. The assembly frame also provides assembly tools and jigs with jacks to support temporarily the components as well as to adjust the components at right positions. In this paper, the assembly scenario and scequence of the major components such as VV and TFC and the concept of the assembly frame including special jigs and fixtures are discussed.

Journal Articles

Electron cyclotron heating applied to the JT-60U tokamak

Hoshino, Katsumichi; Suzuki, Takahiro; Isayama, Akihiko; Ide, Shunsuke; Takenaga, Hidenobu; Kubo, Hirotaka; Fujita, Takaaki; Kamada, Yutaka; Fujii, Tsuneyuki; Tsuda, Takashi; et al.

Fusion Science and Technology, 53(1), p.114 - 129, 2008/01

 Times Cited Count:2 Percentile:17.03(Nuclear Science & Technology)

We report on the applications of the ECH to the JT-60U tokamak. The ECH contributes to the advanced tokamak study in JT-60U in such respects as (1)NTM suppression, (2)Study on the internal transport barrier, (3)Impurity exhaust, (4)Tokamak start-up without center solenoid, (5)Current hole study, (6)Confinement and transport study, and (7)Start-up and shut-down assist. These contributions comes from the good local coupling of the ECH to the tokamak plasma.

Journal Articles

Experimental progress on zonal flow physics in toroidal plasmas

Fujisawa, Akihide*; Ido, Takeshi*; Shimizu, Akihiro*; Okamura, Shoichi*; Matsuoka, Keisuke*; Iguchi, Harukazu*; Hamada, Yasuji*; Nakano, Haruhisa*; Oshima, Shinsuke*; Ito, Kimitaka*; et al.

Nuclear Fusion, 47(10), p.S718 - S726, 2007/10

 Times Cited Count:100 Percentile:95.33(Physics, Fluids & Plasmas)

Present status of experiments on zonal flows is overviewed. Innovative use of modern diagnostics has revealed the existence of zonal flows, their spatio-temporal characteristics, their relationship with turbulence, and their effects on confinement. Particularly a number of observations have been accumulated on the oscillatory branch of the zonal flow, dubbed as geodesic acoustic modes suggesting necessity of theories to give their proper description. Several new methods have elucidated the zonal flow generation processes from the turbulence. Further investigation of relationship between the zonal flows and confinement is strongly encouraged as cross-device activity.

Journal Articles

In search of zonal flows by using direct density fluctuation measurements

Nagashima, Yoshihiko*; Ito, Kimitaka*; Ito, Sanae*; Fujisawa, Akihide*; Yagi, Masatoshi*; Hoshino, Katsumichi; Shinohara, Koji; Ejiri, Akira*; Takase, Yuichi*; Ido, Takeshi*; et al.

Plasma Physics and Controlled Fusion, 49(10), p.1611 - 1625, 2007/10

 Times Cited Count:43 Percentile:81.56(Physics, Fluids & Plasmas)

It was found that the envelope of the ambient density fluctuation of the drift wave turbulence has spectral peaks aroound zonal flow frequencies. A method to detect the zonal flow using this characteristic was considered using the JFT-2M density fluctuation data. There is a possibility that the zonal flow will be able to be detected in the future burning plasmas by using the density fluctuations measured by some density fluctuation measurement by such as the microwave reflectometer and so on.

Journal Articles

Measurement and analysis of the fluctuations and poloidal flow on JFT-2M tokamak

Hoshino, Katsumichi; Ido, Takeshi*; Nagashima, Yoshihiko*; Shinohara, Koji; Ogawa, Hiroaki; Kamiya, Kensaku; Kawashima, Hisato; Tsuzuki, Kazuhiro*; Kusama, Yoshinori; Oasa, Kazumi; et al.

Proceedings of 21st IAEA Fusion Energy Conference (FEC 2006) (CD-ROM), 8 Pages, 2007/03

We report on the potential/density fluctuations in the JFT-2M tokamak. We identified a geodesic acoustic mode (GAM) and its electric field structure. The GAM interacts with the background turbulence in consistent with a drift wave - zonal flow theory. The GAM modulates the turbulence, and the suppression depends on the direction and gradient of the flow velocity in consistent with a theory. During the H-mode, the GAM disappears presumably due to the suppression of the turbulence. We analysed the low frequency potential oscillation during the H-mode. A wavelet analysis showed a low frequency characteristic potential fluctuations (several handred kHz), which disappears in the L-mode and at the occurence of ELM. Observed poloidal flow is about 20 times as large as that of the GAM during the H-mode. If the potential has a spatial inhomogineity, there is a possibility that this low frequency fluctuation comes from the EXB flow or the zonal flow.

132 (Records 1-20 displayed on this page)