Transient analyses of hydraulic head in the fault slip experiments in fracture zones of Shionohira and Kuruma Faults

Wakahama, Hiroshi*; Nojo, Haruka*; Aoki, Kazuhiro; Imai, Hirotaro; Guglielmi, Y.*; Cook, P.*; Soom, F.*

Oyo Chishitsu, 64(5), p.236 - 254, 2023/12

Upon the Hamadori earthquake (Mw 6.7) of 11 April 2011, coseismic surface deformation of 14 km running NNW to SSE in southeast Fukushima Prefecture occurred and was newly named the Shionohira Fault. However, no surface deformation was observed along the Kuruma Fault which is a southern extension of the Shionohira Fault. Fault injection tests using SIMFIP method at the Shionohira site on the former active segment and the Minakamikita site on the latter inactive segment were conducted to evaluate the activity of the two faults. Based on hydraulic responses to water injection into the fault rupture zone in the monitoring boreholes at the two sites, hydraulic properties of the area across the fault zone were estimated using the GRF model (Barker, 1988). The results obtained on hydraulic conductivity, specific storage and flow dimension were consistent with those in the domestic and international literature. The hydraulic conductivity and specific storage were larger in Shionohira than in Minakamikita. The flow dimension of Shionohira was three-dimensional, while that of Minakamikita was found to be a two-dimensional fractional flow. In addition, it is understood that the volumetric expansion occurs in the former site in the triaxial direction and the latter in the uniaxial with the comparison between the uniaxial expansion coefficient calculated from the results of SIMFIP displacement measurements and the specific storage in the hydraulic analysis. The difference in the hydraulic parameters between the two sites corresponded to the difference in the spatial development of fractures considered to be the "water passway," indicating the possibility of a correlation between the parameters and the different possible causes for fault activity at the two sites.

Development of multi-purpose MW gyrotrons for fusion devices

Minami, Ryutaro*; Kariya, Tsuyoshi*; Imai, Tsuyoshi*; Numakura, Tomoharu*; Endo, Yoichi*; Nakabayashi, Hidetaka*; Eguchi, Taku*; Shimozuma, Takashi*; Kubo, Shin*; Yoshimura, Yasuo*; et al.

Nuclear Fusion, 53(6), p.063003_1 - 063003_7, 2013/06

https://doi.org/10.1088/0029-5515/53/6/063003

Development of a methodology for the characterisation of long-term geosphere evolution, 1; Impacts of natural events and processes on the geosphere evolution of coastal setting, in the case of Horonobe area

Niizato, Tadafumi; Imai, Hisashi*; Maekawa, Keisuke; Yasue, Kenichi; Kurikami, Hiroshi; Shiozaki, Isao*; Yamashita, Ryo*

Proceedings of 19th International Conference on Nuclear Engineering (ICONE-19) (CD-ROM), 10 Pages, 2011/10

A critical issue for building confidence in the long-term safety of geological disposal is to demonstrate the stability of the geosphere, taking into account its likely future evolution. This study aims to establish comprehensive techniques for characterising the overall evolution of coastal sites through studying the palaeohydrogeological evolution in the coastal system around the Horonobe area, Hokkaido, northern Japan. Information on natural events and processes related to the palaeohydrogelogical evolution of the area have been integrated into the conceptual models that indicates the temporal and spatial sequences of the events and processes, such as climatic and sea-level changes, palaeogeography, and geomorphological and geological evolution in the area. The groundwater flow simulation, which is based on the conceputualisation of the long-term geosphere evolution, shows the sensitivities of natural events and processes on groundwater flow properties in a coastal setting.

Azimuthal correlations of electrons from heavy-flavor decay with hadrons in and Au+Au collisions at = 200 GeV

Adare, A.*; Afanasiev, S.*; Aidala, C.*; Ajitanand, N. N.*; Akiba, Yasuyuki*; Al-Bataineh, H.*; Alexander, J.*; Aoki, Kazuya*; Aphecetche, L.*; Aramaki, Y.*; et al.

Physical Review C, 83(4), p.044912_1 - 044912_16, 2011/04

https://doi.org/10.1103/PhysRevC.83.044912

Measurements of electrons from the decay of open-heavy-flavor mesons have shown that the yields are suppressed in Au+Au collisions compared to expectations from binary-scaled collisions. Here we extend these studies to two particle correlations where one particle is an electron from the decay of a heavy flavor meson and the other is a charged hadron from either the decay of the heavy meson or from jet fragmentation. These measurements provide more detailed information about the interaction between heavy quarks and the quark-gluon matter. We find the away-side-jet shape and yield to be modified in Au+Au collisions compared to collisions.

A New measurement of the astrophysical Li(d,t)Li reaction

Hashimoto, Takashi; Ishiyama, Hironobu*; Watanabe, Yutaka*; Hirayama, Yoshikazu*; Imai, Nobuaki*; Miyatake, Hiroari; Jeong, S.-C.*; Tanaka, Masahiko*; Yoshikawa, Nobuharu*; Nomura, Toru*; et al.

Physics Letters B, 674(4-5), p.276 - 280, 2009/04

https://doi.org/10.1016/j.physletb.2009.03.031

The excitation function of the Li(d,t)Li reaction was directly measured using Li beams at E = 0.3, 0.4, 0.5, 0.7, 0.8, 1.0, 1.1, and 1.2 MeV with CD targets. The beam energies covered the Gamow peaks for 1310 K. Large cross sections were observed at around E = 0.8 MeV, implying a resonance state located at 22.4 MeV in Be. The present astrophysical reaction rate is higher in one order magnitude than the presently adopted rate at around 110 K.

Analytical study of groundwater flow evolution due to climatic and sealevel change

Kurikami, Hiroshi; Yasue, Kenichi; Niizato, Tadafumi; Imai, Hisashi*; Shiozaki, Isao*; Yamashita, Ryo*

Chikasui Ryudo Kaiseki To Moderuka Ni Kansuru Shimpojium Happyo Rombunshu, p.59 - 66, 2007/01

no abstracts in English

Production of a low-energy radioactive nuclear beam with high purity using JAERI-RMS

Ishiyama, Hironobu*; Ishikawa, Tomoko*; Hashimoto, Takashi; Watanabe, Yutaka*; Hirayama, Yoshikazu*; Imai, Nobuaki*; Miyatake, Hiroari; Tanaka, Masahiko*; Fuchi, Yoshihide*; Yoshikawa, Nobuharu*; et al.

Nuclear Instruments and Methods in Physics Research A, 560(2), p.366 - 372, 2006/05

https://doi.org/10.1016/j.nima.2005.12.244

Thanks to the nature of inverse transfer-reactions, low-energy radioactive nuclear beams in light neutron-rich region were produced. The mass-separation and velocity-separation of the JAERI recoil mass-separator help to form high purity beams. The beams of Li, B, and N-RNBs are utilized to the experiments, so far, with those beam intensities and purities of 1.410 pps and 99, 7.810 pps and 98, and 4.710 pps and 98.5, respectively.

Overview of the national centralized tokamak programme

Kikuchi, Mitsuru; Tamai, Hiroshi; Matsukawa, Makoto; Fujita, Takaaki; Takase, Yuichi*; Sakurai, Shinji; Kizu, Kaname; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; et al.

Nuclear Fusion, 46(3), p.S29 - S38, 2006/03

https://doi.org/10.1088/0029-5515/46/3/S05

The National Centralized Tokamak (NCT) facility program is a domestic research program for advanced tokamak research to succeed JT-60U incorporating Japanese university accomplishments. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility and mobility is pursued in aspect ratio and shape controllability, feedback control of resistive wall modes, wide current and pressure profile control capability for the demonstration of the high-b steady state.

Present status of JAEA-Tokai tandem accelerator

Matsuda, Makoto; Takeuchi, Suehiro; Tsukihashi, Yoshihiro; Hanashima, Susumu; Abe, Shinichi; Osa, Akihiko; Ishizaki, Nobuhiro; Tayama, Hidekazu; Nakanoya, Takamitsu; Kabumoto, Hiroshi; et al.

Proceedings of 3rd Annual Meeting of Particle Accelerator Society of Japan and 31st Linear Accelerator Meeting in Japan, p.275 - 277, 2006/00

no abstracts in English

Development of an RF-input coupler with a multi-loop antenna for the RFQ linac in IFMIF project

Maebara, Sunao; Moriyama, Shinichi; Saigusa, Mikio*; Sugimoto, Masayoshi; Imai, Tsuyoshi; Takeuchi, Hiroshi

Fusion Engineering and Design, 75-79, p.823 - 827, 2005/11

https://doi.org/10.1016/j.fusengdes.2005.06.346

An RF-Input coupler with a multi-loop antenna using co-axial waveguides has been developed for the RFQ linac on IFMIF. In case of using a loop antenna, the loop antenna structure will affected phase difference and power balance in each cavity. A mock-up loop antenna using the pipe diameter of 10mm was fabricated, phase differences and power balances were measured by a low power test. It is found that it is necessary to shorten the installed depth up to 3 cm to make the phase differences and power balance small. But, from a withstanding voltage, it is difficult to couple multi-MW with the single coupler. The coupling with multi-loop antennas using two or four loops is better than one loop antenna from the point views of both withstanding voltage and power balance. The phase difference and power balance were also measured in both cases. A good average phase-difference of 179. and a good RF power balance within 8% error for each cavity were obtained. These results showed one of feasibility for an RF-Input coupler with a multi-loop antenna in the IFMIF 175 MHz RFQ.