Chemical characterization of a volatile dubnium compound, DbOCl

Chiera, N. M.*; Sato, Tetsuya; Eichler, R.*; Tomitsuka, Tomohiro; Asai, Masato; Adachi, Sadia*; Dressler, R.*; Hirose, Kentaro; Inoue, Hiroki*; Ito, Yuta; et al.

Angewandte Chemie; International Edition, 60(33), p.17871 - 17874, 2021/08

https://doi.org/10.1002/anie.202102808

The formation and the chemical characterization of single atoms of dubnium (Db, element 105), in the form of its volatile oxychloride, was investigated using the on-line gas phase chromatography technique, in the temperature range 350 - 600 C. Under the exact same chemical conditions, comparative studies with the lighter homologs of group-5 in the Periodic Table clearly indicate the volatility sequence being NbOCl TaOCl DbOCl. From the obtained experimental results, thermochemical data for DbOCl were derived. The present study delivers reliable experimental information for theoretical calculations on the chemical properties of transactinides.

Database for corrosion under irradiation conditions (Contract research)

Sato, Tomonori; Hata, Kuniki; Kaji, Yoshiyuki; Ueno, Fumiyoshi; Inoue, Hiroyuki*; Taguchi, Mitsumasa*; Seito, Hajime*; Tada, Eiji*; Abe, Hiroshi*; Akiyama, Eiji*; et al.

JAEA-Review 2021-001, 123 Pages, 2021/06

JAEA-Review-2021-001.pdf:10.33MB

In the implement of the decommissioning of Fukushima Daiichi Nuclear Power Station (1F), there are many problems to be solved. Specially, the mitigation of the aging degradation by the corrosion of the structural materials is important to implement the decommissioning safely and continuously. However, there are limited data for the environmental factors of corrosion in 1F, and the condition of 1F is continuously changing. So, the literature data for the water radiolysis and the corrosion under irradiation are listed as the database of corrosion under irradiation in this report. And the new obtained radiolysis and corrosion data, which have not been reported in the literature and will be required in the decommissioning of 1F, are reported.

A Simulation of radiolysis of chloride solutions containing ferrous ion

Hata, Kuniki; Inoue, Hiroyuki*

Journal of Nuclear Science and Technology, 56(9-10), p.842 - 850, 2019/09

https://doi.org/10.1080/00223131.2019.1585986

To investigate the effect of dissolved species from steels on the radiolysis processes of Cl, radiolysis simulations of solutions containing both Cl and Fe were carried out. The results showed that the generation of radiolytic products (HO, O and H) increased mainly by the addition of Fe, and a drop in the pH was caused by the hydrolysis of Fe. This pH drop enhanced the reactivity of Cl with OH, which induced additional generation of HO and O. These results show that low concentrations of Cl (1 10 mol/dm = 35ppm) in the presence of Fe could influence the generation of HO and O during water radiolysis. However, it is considered that these effects of Fe and low concentration of Cl on water radiolysis are less important for corrosion of steels due to the low concentrations of HO and O generated. The other process, such as dissolution of iron enhanced by FeOOH, might predominantly induce corrosion under the conditions of solutions with low concentrations of HO and O.

Development of laser system for a proof-of-principle experiment of laser stripping injection

Harada, Hiroyuki; Saha, P. K.; Yoneda, Hitoki*; Michine, Yurina*; Inoue, Shunsuke*; Sato, Atsushi*; Suganuma, Kazuaki; Yamane, Isao*; Kinsho, Michikazu; Irie, Yoshiro*

Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.811 - 815, 2018/08

https://www.pasj.jp/web_publish/pasj2018/proceedings/PDF/THP0/THP017.pdf

The high-intensity proton accelerator adopts a charge exchange injection scheme, which injects with exchanging from negative Hydrogen ion to proton by using carbon foil. This scheme can realize high intensity proton beam but the uncontrolled beam losses occur by scattering at the foil. Additionally, the beam collision at the foil may cause the break itself. Therefore, a new injection scheme for higher intensity is needed as an alternative to the foil. We newly propose and develop a laser stripping injection scheme. At the first step, we propose a proof-of-principle (POP) experiment of the scheme in J-PARC and develop a laser system. In this presentation, we will introduce the laser stripping injection scheme and describe an overview of a POP experiment. We will report a current status of the laser system.

Corrosion behavior of pure titanium in high pH solution under irradiation

Yukawa, Takuji*; Inoue, Hiroyuki*; Kojima, Takao*; Iwase, Akihiro*; Taniguchi, Naoki; Tachikawa, Hirokazu*

Zairyo To Kankyo 2016 Koenshu (CD-ROM), p.359 - 362, 2016/05

The immersion tests of pure titanium were carried out in aqueous solution containing carbonate/bicarbonate with 50 mM-chloride ion under gamma irradiation. The effect of pH on general corrosion rate of titanium were studied. The experimental results showed that the concentration of hydrogen preoxide was increased with pH, and the corrosion rate increased with the hydrogen preoxide concentration. The corrosion rate in pH12 and 13 were 5 to10 times larger than those under unirradiated conditions.

Design and performance of high-pressure PLANET beamline at pulsed neutron source at J-PARC

Hattori, Takanori; Sano, Asami; Arima, Hiroshi*; Komatsu, Kazuki*; Yamada, Akihiro*; Inamura, Yasuhiro; Nakatani, Takeshi; Seto, Yusuke*; Nagai, Takaya*; Utsumi, Wataru; et al.

Nuclear Instruments and Methods in Physics Research A, 780, p.55 - 67, 2015/04

https://doi.org/10.1016/j.nima.2015.01.059

PLANET is a time-of-flight (ToF) neutron beamline dedicated to high-pressure and high-temperature experiments. The large six-axis multi-anvil high-pressure press designed for ToF neutron diffraction experiments enables routine data collection at high pressures and high temperatures up to 10 GPa and 2000 K, respectively. To obtain clean data, the beamline is equipped with the incident slits and receiving collimators to eliminate parasitic scattering from the high-pressure cell assembly. The high performance of the diffractometer for the resolution ( / 0.6%) and the accessible -spacing range (0.2-8.4 ) together with low-parasitic scattering characteristics enables precise structure determination of crystals and liquids under high pressure and temperature conditions.

Development of negative ion extractor in the high-power and long-pulse negative ion source for fusion application

Kashiwagi, Mieko; Umeda, Naotaka; Tobari, Hiroyuki; Kojima, Atsushi; Yoshida, Masafumi; Taniguchi, Masaki; Dairaku, Masayuki; Maejima, Tetsuya; Yamanaka, Haruhiko; Watanabe, Kazuhiro; et al.

Review of Scientific Instruments, 85(2), p.02B320_1 - 02B320_3, 2014/02

https://doi.org/10.1063/1.4852297

The negative ion extractor for high power and long-pulse operations is newly developed toward the neutral beam injector (NBI) for heating & current drive of future fusion machines such as ITER, JT-60 Super Advanced (SA) and DEMO reactor. The satisfactory cooling capability is designed in the thermal analysis. A negative ion production and a suppression of electrons are experimentally validated for this new extractor. As the results, the negative ion current shows increases by a factor of 1.3 with suppressing the electron current. The beam divergence angle is also maintained small enough, 4 mrad.

Long-pulse production of the negative ion beams for JT-60SA

Kojima, Atsushi; Hanada, Masaya; Yoshida, Masafumi; Inoue, Takashi; Watanabe, Kazuhiro; Taniguchi, Masaki; Kashiwagi, Mieko; Umeda, Naotaka; Tobari, Hiroyuki; Grisham, L. R.*; et al.

Fusion Engineering and Design, 88(6-8), p.918 - 921, 2013/10

https://doi.org/10.1016/j.fusengdes.2013.01.032

In this paper, the recent activities are reported toward demonstration of the long pulse production. As for the improvement of uniform beam current profile, a symmetric magnetic field configuration for the source plasma production, a so-called tent-shaped filter, was found to be effective to improve the uniformity of the beam current profile. A similar configuration is applied to the JT-60 negative ion source whose plasma size is 1220 mm 564 mm. An estimation from trajectory calculations of primary electrons with the symmetric magnetic field configuration showed that the primary electrons were distributed uniformly in a longitudinal direction. As for the temperature control of the plasma grid, a prototype of the grid with cooling/heating by circulating a high-temperature fluorinated fluid has been developed. This grid was found to have a capability to control the temperature with a time constant of 10 s by considering the physical properties of the fluid.

Analysis of electron temperature distribution by kinetic modeling of electron energy distribution function in JAEA 10 ampere negative ion source

Shibata, Takanori; Terasaki, Ryo*; Kashiwagi, Mieko; Inoue, Takashi; Dairaku, Masayuki; Taniguchi, Masaki; Tobari, Hiroyuki; Umeda, Naotaka; Watanabe, Kazuhiro; Sakamoto, Keishi; et al.

AIP Conference Proceedings 1515, p.177 - 186, 2013/02

https://doi.org/10.1063/1.4792784

In the neutral beam injector in JT-60SA, one of issues is that negative ion beam is partially intercepted at acceleration grids due to a spatial non-uniformity of negative ion production on large extraction area (0.90.45m). Previous experiments showed that fast electrons emitted from filament cathodes are transported in a longitudinal direction by drift and the spatial distribution of electron temperature () strongly relates with the non-uniformity. In this study, a three-dimensional electron transport analysis has been developed. Electron temperature in the analysis agreed well with measurements in JAEA 10A ion source. This study clarified that the bias of distribution are caused by the following reasons; (1) fast electrons drifted in the longitudinal direction survives near the end wall with energy up to = 25-60 eV and (2) they produces thermal electrons by collision with plasma particles there.

Vacuum insulation of the high energy negative ion source for fusion application

Kojima, Atsushi; Hanada, Masaya; Hilmi, A.*; Inoue, Takashi; Watanabe, Kazuhiro; Taniguchi, Masaki; Kashiwagi, Mieko; Umeda, Naotaka; Tobari, Hiroyuki; Kobayashi, Shinichi*; et al.

Review of Scientific Instruments, 83(2), p.02B117_1 - 02B117_5, 2012/02

https://doi.org/10.1063/1.3672471

Production of 500 keV, 3 A beams has been successfully achieved in the JT-60 negative by overcoming the low voltage holding of the accelerator. Toward the design of next ion source, database for the voltage holding capability based on experimental results is required and obtained. As a result, the voltage holding capability was found to vary with 67 N power of -0.15 and with 31.7 S power of -0.125 where N is the aperture number and S is the anode surface area. When N = 1100 and S = 2 m are applied to the design of JT-60SA ion source, the factors C are estimated to be 23 and 29, respectively. Therefore, the influence of the local electric field around the apertures is stronger than that of the surface area.