Fabrication process qualification of TF Insert Coil using real ITER TF conductor

Ozeki, Hidemasa; Isono, Takaaki; Kawano, Katsumi; Saito, Toru; Kawasaki, Tsutomu; Nishino, Katsumi; Okuno, Kiyoshi; Kido, Shuichi*; Semba, Tomoyuki*; Suzuki, Yozo*; et al.

IEEE Transactions on Applied Superconductivity, 25(3), p.4200804_1 - 4200804_4, 2015/06

https://doi.org/10.1109/TASC.2014.2364393

Compact DEMO, SlimCS; Design progress and issues

Tobita, Kenji; Nishio, Satoshi; Enoeda, Mikio; Kawashima, Hisato; Kurita, Genichi; Tanigawa, Hiroyasu; Nakamura, Hirofumi; Honda, Mitsuru; Saito, Ai*; Sato, Satoshi; et al.

Nuclear Fusion, 49(7), p.075029_1 - 075029_10, 2009/07

https://doi.org/10.1088/0029-5515/49/7/075029

Recent design study on SlimCS focused mainly on the torus configuration including blanket, divertor, materials and maintenance scheme. For vertical stability of elongated plasma and high beta access, a sector-wide conducting shell is arranged in between replaceable and permanent blanket. The reactor adopts pressurized-water-cooled solid breeding blanket. Compared with the previous advanced concept with supercritical water, the design options satisfying tritium self-sufficiency are relatively scarce. Considered divertor technology and materials, an allowable heat load to the divertor plate should be 8 MW/m or lower, which can be a critical constraint for determining a handling power of DEMO (a combination of alpha heating power and external input power for current drive).

Ion irradiation effects on amorphization and thermal crystallization in Zr-Al-Ni-Cu alloys

Nagata, Shinji*; Higashi, Seijiro*; Tsuchiya, Bun*; To, Kentaro*; Shikama, Tatsuo*; Takahiro, Katsumi*; Ozaki, Koichi*; Kawatsura, Kiyoshi*; Yamamoto, Shunya; Inoue, Aichi

Nuclear Instruments and Methods in Physics Research B, 257(1-2), p.420 - 423, 2007/04

https://doi.org/10.1016/j.nimb.2007.01.115

Structural modification and primary precipitates in the ZrAlNiCu alloy films (50-100 m thickness) caused by radiation with 300-500 keV H, Ag, Cu and Au ions has been studied. The results of XRD indicated that a metastable primary phase was formed in the alloy by the heat treatment after ion irradiation, but no difference was observed just after the ion irradiation at room temperature. Furthermore, higher incident Au ion fluence effectively suppressed thermal precipitation of the ZrNi type crystalline phase in the alloy. The deposited energy dependence of the precipitation behavior indicated an increase of the nucleation sites by the implanted metal atoms, simultaneously with a decrease of the growth rate by higher energy deposition density.

Surface wave on high speed liquid lithium flow for IFMIF

Kondo, Hiroo*; Fujisato, Atsushi*; Yamaoka, Nobuo*; Inoue, Shoji*; Miyamoto, Seiji*; Iida, Toshiyuki*; Nakamura, Hiroo; Ida, Mizuho*; Matsushita, Izuru*; Muroga, Takeo*; et al.

Fusion Engineering and Design, 75-79, p.865 - 869, 2005/11

https://doi.org/10.1016/j.fusengdes.2005.06.086

no abstracts in English

Study on Advanced Structural Design for Commercialized Fast Breeder Reactors

Morishita, Masaki; Kitamura, Seiji; Takahashi, Kenji; Inoue, Kazuhiko; Kida, Masanori; Moro, Satoshi*; Kato, Asao*; Fushimi, Minoru*

JNC TY9400 2004-028, 921 Pages, 2004/11

Japan Nuclear Cycle Development Institute (JNC) and Japan Atomic Power Company (JAPC) launched joint research programs on structural design and three-dimensional seismic isolation technologies, as part of the supporting R&D activities for the feasibility studies on commercialized fast breeder reactor cycle systems. A research project by JAPC under the auspices of the Ministry of Economy, Trade, and Industry (METI) with technical support by JNC is included in this joint study. This report contains the results of the research on the structural design technology. The research scope was identified as (1) Study on Developing Program, (2) Study on 3-dimentional Entire Building Base Isolation System, and (3) Study on Vertical Isolation System for Main Equipment, and the results of this year's studies are summarized as follows. (1) Study on Developing Program -Performance Requirements for 3-dimensional Isolation Devices "The behavior of a three-dimensional isolated reactor building" and "amenity under the strong wind load" were studied in order to set up performance requirements for the three-dimensional isolation system. Consequently, it was proved for the former subject that the structure of horizontal base-dimensional isolated building was applicable to 3-D isolated building and for the latter that amenity of the operator in the 3-D isolated reactor building is not affected under the strong wind. -Development Targets and Schedules for Three-dimensional Isolation Deviece In order to select the development candidate of the three dimensional isolation devices, "evaluation items and criteria" and "technical guideline on seismic three-dimensional isolation system" were studied. For the former subject, detailed requirements to the component in the reactor building were studied based on the 2002 fiscal year result and embodied.(2) Study on 3-dimentional Entire Building Base Isolation System -The 3 system concepts nominated on 2001, "Hydraulic system", "Fiber reinforced air sp

Study on Advanced Structural Design for Commercialized Fast Breeder Reactors

Morishita, Masaki; Kitamura, Seiji; Inoue, Kazuhiko; Kida, Masanori; Moro, Satoshi; Kato, Asao; Fushimi, Minoru*

JNC TY9400 2003-009, 682 Pages, 2003/05

JNC-TY9400-2003-009.pdf:35.1MB

Japan Nuclear Cycle Development Institute(JNC) and Japan Atomic Power Company (JAPC) launched joint research programs on structural design and three-dimensional seismic isolation technologies,as part of the supporting R&D activities for the feasibility studies on commercialized fast breeder reactor cycle systems. A research project by JAPC under the auspices of the Ministry of Economy,Trade,and Industry (METI) with technical support by JNC is included in this joint study. This report contains the results of the research on the structural design technology. The research scope was identified as (1) Study on Developing Program,(2) Study on 3-dimentional Entire Building Base Isolation System,and (3) Study on Vertical Isolation System for Main Equipment, and the results of this year's studies are summarized as follows.

ITER engineering design

Shimomura, Yasuo; Tsunematsu, Toshihide; Yamamoto, Shin; Maruyama, So; Mizoguchi, Tadanori*; Takahashi, Yoshikazu; Yoshida, Kiyoshi; Kitamura, Kazunori*; Ioki, Kimihiro*; Inoue, Takashi; et al.

Purazuma, Kaku Yugo Gakkai-Shi, 78(Suppl.), 224 Pages, 2002/01

http://ci.nii.ac.jp/naid/40004988703

no abstracts in English

Electrical insulation and conduction coating for fusion experimental devices

Onozuka, Masanori*; Tsujimura, Seiji*; Toyoda, Masahiko*; Inoue, Masahiko*; Abe, Tetsuya; Murakami, Yoshio

Fusion Technology, 29(1), p.73 - 82, 1996/01

https://doi.org/10.13182/FST96-A30657

no abstracts in English

Uncertainty analysis for initial defect scenario in geological disposal of high level waste

Inoue, Yoshihisa; Takeda, Seiji; Kimura, Hideo

no journal, , 

no abstracts in English

The Precipitation behavior of double-prime (NiNb) in the high Ni steel

Sano, Keisuke*; Ono, Naoko*; Ukai, Shigeharu*; Hayashi, Shigenari*; Miura, Seiji*; Yamashita, Shinichiro; Inoue, Toshihiko

no journal, , 

JAEA is study in the high Ni-alloy behavior as ODS substitute materials for the use in fast reactor. The precipitation behavior of double-prime (NiNb) in the high Ni steel was tested in prescription examinations. The results was the double-prime (NiNb) became a fault size and the hardness was decreased in the high prescription temperature and the long prescription time.