Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Yamanaka, Atsushi; Hashimoto, Kowa; Uchida, Toyomi; Shirato, Yoji; Isozaki, Toshihiko; Nakamura, Yoshinobu
Proceedings of International Conference on Toward and Over the Fukushima Daiichi Accident (GLOBAL 2011) (CD-ROM), 6 Pages, 2011/12
The Tokai Reprocessing Plant (TRP) adopted the PUREX method in 1977 and has reprocessed spent nuclear fuel of 1140 tHM (tons of heavy metals) since then. The reprocessing equipment suffers from various corrosion phenomena because of high nitric acidity, solution ion concentrations, such as uranium, plutonium, and fission products, and temperature. Therefore, considering corrosion performance in such a severe environment, stainless steels, titanium steel, and so forth were employed as corrosion resistant materials. The severity of the corrosive environment depends on the nitric acid concentration and the temperature of the solution, and uranium in the solution reportedly does not significantly affect the corrosion of stainless steels and controls the corrosion rates of titanium steel. The TRP equipment that handles uranyl nitrate solution operates at a low nitric acid concentration and has not experienced corrosion problems until now. However, there is a report that corrosion rates of some stainless steels increase in proportion to rising uranium concentrations. The equipment that handles the uranyl nitrate solution in the TRP includes the evaporators, which concentrate uranyl nitrate to a maximum concentration of about 1000 gU/L (grams of uranium per liter), and the denitrator, where uranyl nitrate is converted to UO
powder at about 320
C. These equipments are therefore required to grasp the degree of the progress of corrosion to handle high-temperature and high-concentration uranyl nitrate. The evaluation of this equipment on the basis of thickness measurement confirmed only minor corrosion and indicated that the equipment would be fully adequate for future operation.
Oyama, Sunao*; Hamamoto, Shimpei; Kaneshiro, Noriyuki*; Nemoto, Takahiro; Sekita, Kenji; Isozaki, Minoru; Emori, Koichi; Ito, Yoshiteru*; Yamamoto, Hideo*; Ota, Yukimaru; et al.
JAEA-Technology 2007-047, 40 Pages, 2007/08
JAEA-Technology-2007-047.pdf:18.83MB
High-Temperature engineering Test Reactor (HTTR) built by Japan Atomic Energy Agency (JAEA) has commonly used reciprocating compressor to extract helium gas and discharge helium gas into primary/secondary coolant helium loop from helium purification system. Rod-seal structure of the compressor is complicated from a prevention coolant leak standpoint. Because of frequently leakage of seal oil in operation, Rod seal structure isn't as reliable as it should be sustainable in the stable condition during long term operation. As a result of investigations, leakage's root is found in that seal were used in a range beyond limit sliding properties of seal material. Therefore a lip of the seal was worn and transformed itself and was not able to sustain a seal function. Endurance test using materials testing facility and verification test using a actual equipment on candidate materials suggest that a seal of fluorine contained resin mixed graphite is potentially feasible material of seal.
Shirato, Yoji; Isozaki, Toshihiko; Kishi, Yoshiyuki; Isobe, Hiroyasu; Nakamura, Yoshinobu; Uchida, Toyomi; Seno, Shigeo
no journal, ,
no abstracts in English
Isozaki, Toshihiko; Tsutagi, Koichi; Shirato, Yoji; Nakazawa, Yutaka; Kake, Yasuhiro; Furukawa, Shinichi
no journal, ,
no abstracts in English
Isozaki, Toshihiko; Shirato, Yoji; Tsutagi, Koichi; Yoshino, Yasuyuki; Uchida, Toyomi; Nakamura, Yoshinobu
no journal, ,
no abstracts in English