Measurements of gas-liquid two-phase flow dynamics using high-speed neutron imaging

Ito, Daisuke*; Odaira, Naoya*; Ito, Kei*; Saito, Yasushi*; Kurita, Keisuke; Iikura, Hiroshi

Journal of Physics; Conference Series, 2605, p.012024_1 - 012024_6, 2023/10

https://doi.org/10.1088/1742-6596/2605/1/012024

Gas-liquid two-phase flow appears in many heat-exchanging devices. To understand the phenomena in such devices, the two-phase flow dynamics should be clarified. In this study, high-speed neutron imaging is applied to the measurements of two-phase flow dynamics, and the accuracy of the void fraction measurement is investigated.

Non-stoichiometric -base GdO precipitations in a Mg-Zn-Gd alloy

Ito, Yuto*; Egusa, Daisuke*; Yamaguchi, Masatake; Abe, Eiji*

Materials Transactions, 64(8), p.2022 - 2025, 2023/08

https://doi.org/10.2320/matertrans.MT-M2023068

We have found that, during scanning transmission electron microscopy observations, heating of a MgZnGd (at.%) alloy at 623K leads to dynamic precipitations of face-centered-cubic ()-based Gd nanoparticles. With the aid of density-functional theory (DFT) calculations, the observed lattice constant of 5.32, which is larger than that expected for pure -Gd of 5.06, is likely to be due to oxygen atoms inserted at tetrahedral interstitial sites with essentially a fractional occupation. Systematic DFT calculations show possible occurrences of -Gd-based oxide phase with a wide non-stoichiometry range by occupying either tetrahedral or octahedral interstitial positions, being represented as GdO.

Spontaneous topological Hall effect induced by non-coplanar antiferromagnetic order in intercalated van der Waals materials

Takagi, Hirotaka*; Takagi, Rina*; Minami, Susumu*; Nomoto, Takuya*; Oishi, Kazuki*; Suzuki, Michito*; Yanagi, Yuki*; Hirayama, Motoaki*; Khanh, N.*; Karube, Kosuke*; et al.

Nature Physics, 19(7), p.961 - 968, 2023/07

https://doi.org/10.1038/s41567-023-02017-3

Visualization of gas-liquid interfacial behavior in a narrow channel using high-speed neutron imaging

Ito, Daisuke*; Odaira, Naoya*; Ito, Kei*; Saito, Yasushi*; Kurita, Keisuke; Iikura, Hiroshi

Konsoryu, 37(1), p.73 - 78, 2023/03

https://doi.org/10.3811/jjmf.2023.007

Gas-liquid two-phase flow is a very complicated flow phenomenon that involves the interaction between gas and liquid phases. Recently, an accurate simulation technique of two-phase flow has been developed. However, the validation of the simulated results is insufficient due to less experimental data. It is especially difficult to measure interfacial behavior with significant spatiotemporal fluctuation. To understand such phenomena, measurement methods with high spatial and temporal resolutions are required. Neutron imaging is a powerful tool for two-phase flow visualization. In this study, two-phase flow in the narrow rectangular channel was visualized by high-speed neutron imaging.

Spatial distribution and preferred orientation of crystalline microstructure of lead-bismuth eutectic

Ito, Daisuke*; Sato, Hirotaka*; Odaira, Naoya*; Saito, Yasushi*; Parker, J. D.*; Shinohara, Takenao; Kai, Tetsuya; Oikawa, Kenichi

Journal of Nuclear Materials, 569, p.153921_1 - 153921_6, 2022/10

https://doi.org/10.1016/j.jnucmat.2022.153921

A Storm-induced flood and associated nearshore dispersal of the river-derived suspended Cs

Uchiyama, Yusuke*; Tokunaga, Natsuki*; Azuma, Kohei*; Kamidaira, Yuki; Tsumune, Daisuke*; Iwasaki, Toshiki*; Yamada, Masatoshi*; Tateda, Yutaka*; Ishimaru, Takashi*; Ito, Yukari*; et al.

Science of the Total Environment, 816, p.151573_1 - 151573_13, 2022/04

https://doi.org/10.1016/j.scitotenv.2021.151573

no abstracts in English

Improving the safety of the high temperature gas-cooled reactor "HTTR" based on Japan's new regulatory requirements

Hamamoto, Shimpei; Shimizu, Atsushi; Inoi, Hiroyuki; Tochio, Daisuke; Homma, Fumitaka; Sawahata, Hiroaki; Sekita, Kenji; Watanabe, Shuji; Furusawa, Takayuki; Iigaki, Kazuhiko; et al.

Nuclear Engineering and Design, 388, p.111642_1 - 111642_11, 2022/03

https://doi.org/10.1016/j.nucengdes.2021.111642

Following the Fukushima Daiichi Nuclear Power Plant accident in 2011, the Japan Atomic Energy Agency adapted High-Temperature engineering Test Reactor (HTTR) to meet the new regulatory requirements that began in December 2013. The safety and seismic classifications of the existing structures, systems, and components were discussed to reflect insights regarding High Temperature Gas-cooled Reactors (HTGRs) that were acquired through various HTTR safety tests. Structures, systems, and components that are subject to protection have been defined, and countermeasures to manage internal and external hazards that affect safety functions have been strengthened. Additionally, measures are in place to control accidents that may cause large amounts of radioactive material to be released, as a beyond design based accident. The Nuclear Regulatory Commission rigorously and appropriately reviewed this approach for compliance with the new regulatory requirements. After nine amendments, the application to modify the HTTR's installation license that was submitted in November 2014 was approved in June 2020. This response shows that facilities can reasonably be designed to meet the enhanced regulatory requirements, if they reflect the characteristics of HTGRs. We believe that we have established a reference for future development of HTGR.

Impact assessment for internal flooding in HTTR (High temperature engineering test reactor)

Tochio, Daisuke; Nagasumi, Satoru; Inoi, Hiroyuki; Hamamoto, Shimpei; Ono, Masato; Kobayashi, Shoichi; Uesaka, Takahiro; Watanabe, Shuji; Saito, Kenji

JAEA-Technology 2021-014, 80 Pages, 2021/09

JAEA-Technology-2021-014.pdf:5.87MB

In response to the new regulatory standards established in response to the accident at TEPCO's Fukushima Daiichi Nuclear Power Station in March 2011, measures and impact assessments related to internal flooding at HTTR were carried out. In assessing the impact, considering the characteristics of the high-temperature gas-cooled reactor, flooding due to assumed damage to piping and equipment, flooding due to water discharge from the system installed to prevent the spread of fire, and flooding due to damage to piping and equipment due to an earthquake. The effects of submersion, flooding, and flooding due to steam were evaluated for each of them. The impact of the overflow of liquids containing radioactive materials outside the radiation-controlled area was also evaluated. As a result, it was confirmed that flooding generated at HTTR does not affect the safety function of the reactor facility by taking measures.

First isolation and analysis of caesium-bearing microparticles from marine samples in the Pacific coastal area near Fukushima Prefecture

Miura, Hikaru*; Ishimaru, Takashi*; Ito, Yukari*; Kuribara, Yuichi; Otosaka, Shigeyoshi*; Sakaguchi, Aya*; Misumi, Kazuhiro*; Tsumune, Daisuke*; Kubo, Atsushi*; Higaki, Shogo*; et al.

Scientific Reports (Internet), 11, p.5664_1 - 5664_11, 2021/03

https://doi.org/10.1038/s41598-021-85085-w

For the first time, we isolated and investigated seven CsMPs (radioactive caesium-bearing microparticles) from marine particulate matter and sediment. From the elemental composition, the Cs/Cs activity ratio, and the Cs activity per unit volume results, we inferred that the five CsMPs collected from particulate matter were emitted from Unit 2 of the FDNPP, whereas the two CsMPs collected from marine sediment were possibly emitted from Unit 3. The presence of CsMPs can cause overestimation of the solid-water distribution coefficient of Cs in marine sediments and particulate matter and a high apparent radiocaesium concentration factor for marine biota. CsMPs emitted from Unit 2, which were collected from the estuary of a river that flowed through a highly contaminated area, may have been deposited on land and then transported by the river. By contrast, CsMPs emitted from Unit 3 were possibly transported eastward by the wind and deposited directly onto the ocean surface.

Image-based view selection for shape comparison of mode water regions in virtual reality spaces

Yano, Midori; Ito, Takayuki*; Tanaka, Yusuke*; Matsuoka, Daisuke*; Araki, Fumiaki*; Czauderna, T.*; Stephens, K.*

Proceedings of Joint International Conference on Supercomputing in Nuclear Applications + Monte Carlo 2020 (SNA + MC 2020), p.201 - 208, 2020/10

Visual analysis plays an important role in understanding and evaluating the climate models, their variables, and their outputs because complex processes are required for the tuning of the climate models. Virtual Reality (VR) technologies are effective for 3D visualization and have been recently employed for visual analysis of more various scientific data. However, researchers may have some problematic situations while using VR space depending on user operations and target geometries. Here, we propose an image-based view selection method to solve these situations and understand differences in ocean states between simulations and observations based on shapes of mode water regions. This view selection takes evaluation criteria for shape comparison of mode water regions generated from simulations and observations into account. This paper introduces two example cases applying this view selection and discusses on a degree of shape matching of mode water regions of each case.