First observation of O

Kondo, Yosuke*; Achouri, N. L.*; Al Falou, H.*; Atar, L.*; Aumann, T.*; Baba, Hidetada*; Boretzky, K.*; Caesar, C.*; Calvet, D.*; Chae, H.*; et al.

Nature, 620(7976), p.965 - 970, 2023/08

https://doi.org/10.1038/s41586-023-06352-6

no abstracts in English

Measurement of void fraction distribution in a sphere-packed bed using X-ray imaging

Yamamoto, Seishiro*; Odaira, Naoya*; Ito, Daisuke*; Ito, Kei*; Saito, Yasushi*; Imaizumi, Yuya; Matsuba, Kenichi; Kamiyama, Kenji

Konsoryu, 37(1), p.79 - 85, 2023/03

Spatial distribution and preferred orientation of crystalline microstructure of lead-bismuth eutectic

Ito, Daisuke*; Sato, Hirotaka*; Odaira, Naoya*; Saito, Yasushi*; Parker, J. D.*; Shinohara, Takenao; Kai, Tetsuya; Oikawa, Kenichi

Journal of Nuclear Materials, 569, p.153921_1 - 153921_6, 2022/10

https://doi.org/10.1016/j.jnucmat.2022.153921

Design and actual performance of J-PARC 3 GeV rapid cycling synchrotron for high-intensity operation

Yamamoto, Kazami; Kinsho, Michikazu; Hayashi, Naoki; Saha, P. K.; Tamura, Fumihiko; Yamamoto, Masanobu; Tani, Norio; Takayanagi, Tomohiro; Kamiya, Junichiro; Shobuda, Yoshihiro; et al.

Journal of Nuclear Science and Technology, 59(9), p.1174 - 1205, 2022/09

https://doi.org/10.1080/00223131.2022.2038301

In the Japan Proton Accelerator Research Complex, the purpose of the 3 GeV rapid cycling synchrotron (RCS) is to accelerate a 1 MW, high-intensity proton beam. To achieve beam operation at a repetition rate of 25 Hz at high intensities, the RCS was elaborately designed. After starting the RCS operation, we carefully verified the validity of its design and made certain improvements to establish a reliable operation at higher power as possible. Consequently, we demonstrated beam operation at a high power, namely, 1 MW. We then summarized the design, actual performance, and improvements of the RCS to achieve a 1 MW beam.

Behavior of light elements in iron-silicate-water-sulfur system during early Earth's evolution

Iizuka, Riko*; Goto, Hirotada*; Shito, Chikara*; Fukuyama, Ko*; Mori, Yuichiro*; Hattori, Takanori; Sano, Asami; Funakoshi, Kenichi*; Kagi, Hiroyuki*

Scientific Reports (Internet), 11(1), p.12632_1 - 12632_10, 2021/06

https://doi.org/10.1038/s41598-021-91801-3

The Earth's core consist of Fe-Ni alloy with some light elements (H, C, O, Si, S etc.). Hydrogen (H) is the most abundant element in the universe and one of the promising candidates. In this study, we have investigated the effects of sulfur(S) on hydrogenation of iron-hydrous silicate system containing saturated water in the ideal composition of the primitive Earth. We observed a series of phase transitions of Fe, dehydration of the hydrous mineral, and formation of olivine and enstatite with increasing temperature. The FeS formed as the coexisting phase of Fe under high-pressure and temperature condition, but its unit cell volume did not increase, suggesting that FeS is hardly hydrogenated. Recovered samples exhibited that H and S can be incorporated into solid Fe, which lowers the melting temperature as Fe(H)-FeS system. No detection of other light elements (C, O, Si) in solid Fe suggests that they dissolve into molten iron hydride and/or FeS in the later process of Earth's core-mantle differentiation.

High-pressure and high-temperature neutron-diffraction experiments using Kawai-type multi-anvil assemblies

Sano, Asami; Kakizawa, Sho*; Shito, Chikara*; Hattori, Takanori; Machida, Shinichi*; Abe, Jun*; Funakoshi, Kenichi*; Kagi, Hiroyuki*

High Pressure Research, 41(1), p.65 - 74, 2021/03

https://doi.org/10.1080/08957959.2020.1867723

We applied Kawai-type multi-anvil assemblies (MA6-8) for time-of-flight neutron-diffraction experiments to achieve high pressures and high temperatures simultaneously. To achieve sufficient signal intensities, the angular access to the sample was enlarged using slits and tapers on the first-stage anvils. Using SiC-binder sintered diamond for the second-stage anvils that transmits neutrons, sufficient signal intensities were achieved at a high-pressure of 23.1 GPa. A high-temperature experiment was also conducted at 16.2 GPa and 973 K, validating the use of tungsten carbide for the second-stage anvils. The present study reveals the capability of the MA6-8 cells in neutron-diffraction experiments to attain pressures and temperatures beyond the limits of the conventional MA6-6 cells used in the high-pressure neutron diffractometer PLANET at the MLF, J-PARC.

Status of LBE study and experimental plan at JAEA

Saito, Shigeru; Wan, T.*; Okubo, Nariaki; Obayashi, Hironari; Watanabe, Nao; Ohdaira, Naoya*; Kinoshita, Hidetaka; Yamaki, Kenichi*; Kita, Satoshi*; Yoshimoto, Hidemitsu*; et al.

JPS Conference Proceedings (Internet), 33, p.011041_1 - 011041_6, 2021/03

https://doi.org/10.7566/JPSCP.33.011041

An Accelerator Driven System (ADS) for waste transmutation investigated in JAEA employs lead-bismuth eutectic (LBE) as a neutron production target material and coolant. The neutrons are to be produced via the spallation with 1.5 GeV proton beam injection. As materials irradiation data are important for ADS development, JAEA plans to construct an irradiation facility with LBE neutron production target in J-PARC. There are many technical issues on LBE for practical use. In JAEA, various R&Ds are being carried out. Concerning corrosion study, conditioning operation and functional tests of OLLOCHI started. Oxygen concentration control technology has also developing. In the large scale LBE loop experiment, the operation for steady state and transient experiments was performed by using IMMORTAL. In the area of instrument, development of ultrasonic flow meter and freeze seal valve are progressing as a key technology for the LBE loop system. Investigation of behavior of impurities in LBE, which is important for design of the irradiation facility, started. In this paper, the status of the LBE studies and experimental plan will be presented.

Development of logging data processing tool for lead-bismuth experimental devices

Yamaki, Kenichi*; Kita, Satoshi*; Obayashi, Hironari; Ariyoshi, Gen; Saito, Shigeru; Sasa, Toshinobu

JAEA-Technology 2020-021, 26 Pages, 2021/02

JAEA-Technology-2020-021.pdf:2.34MB

As digitalization of measuring instruments, Programmable Logic Controller is mainly used for controlling large-scale devices, and many test devices are controlled in digital. Together with increase of the data storage capacity, it has become possible to record the measured values over the entire experimental period. By collecting the entire experimental data, it became easy to appropriately record the test environment during the corrosion test of materials and to analyze the changes and transients during continuous operation from various viewpoints. On the other hand, in a long-term test, the large number of measurement data were recorded, which requires long time for data processing and data extraction for analyses. In addition, it is necessary to pay attention to organize the data collected by different data formats. To solve these problems, a processing tool were produced to extract and process the data efficiently from the sequencer installed in the lead-bismuth test device.

Lattice Boltzmann modeling and simulation of forced-convection boiling on a cylinder

Saito, Shimpei*; De Rosis, A.*; Fei, L.*; Luo, K. H.*; Ebihara, Kenichi; Kaneko, Akiko*; Abe, Yutaka*

Physics of Fluids, 33(2), p.023307_1 - 023307_21, 2021/02

https://doi.org/10.1063/5.0032743

A Boiling phenomenon in a liquid flow field is known as forced-convection boiling. We numerically investigated the boiling system on a cylinder in a flow at a saturated condition. To deal with such a phenomenon, we developed a numerical scheme based on the pseudopotential lattice Boltzmann method. The collision was performed in the space of central moments (CMs) to enhance stability for high Reynolds numbers. Furthermore, additional terms for thermodynamic consistency were derived in a CMs framework. The effectiveness of the model was tested against some boiling processes, including nucleation, growth, and departure of a vapor bubble for high Reynolds numbers. Our model can reproduce all the boiling regimes without the artificial initial vapor phase. We found that the Nukiyama curve appears even though the focused system is the forced-convection system. Also, our simulations support experimental observations of intermittent direct solid-liquid contact even in the film-boiling regime.

Thickness dependence of spin Peltier effect visualized by thermal imaging technique

Daimon, Shunsuke*; Uchida, Kenichi*; Ujiie, Naomi*; Hattori, Yasuyuki*; Tsuboi, Rei*; Saito, Eiji

Applied Physics Express, 13(10), p.103001_1 - 103001_4, 2020/10

https://doi.org/10.35848/1882-0786/abb2b5