Development of wide range photon detection system for muonic X-ray spectroscopy

Mizuno, Rurie*; Niikura, Megumi*; Saito, Takeshi*; Matsuzaki, Teiichiro*; Sakurai, Hiroyoshi*; Amato, A.*; Asari, Shunsuke*; Biswas, S.*; Chiu, I.-H. ; Gianluca, J.*; et al.

Nuclear Instruments and Methods in Physics Research A, 1060, p.169029_1 - 169029_14, 2024/03

https://doi.org/10.1016/j.nima.2023.169029

Development of a non-destructive depth-selective quantification method for sub-percent carbon contents in steel using negative muon lifetime analysis

Ninomiya, Kazuhiko*; Kubo, Kenya*; Inagaki, Makoto*; Yoshida, Go*; Chiu, I.-H. ; Kudo, Takuto*; Asari, Shunsuke*; Sentoku, Sawako*; Takeshita, Soshi*; Shimomura, Koichiro*; et al.

Scientific Reports (Internet), 14, p.1797_1 - 1797_8, 2024/01

https://doi.org/10.1038/s41598-024-52255-5

The amount of C in steel, which is critical in determining its properties, is strongly influenced by steel production technology. We propose a novel method of quantifying the bulk C content in steel non-destructively using muons. This revolutionary method may be used not only in the quality control of steel in production, but also in analyzing precious steel archaeological artifacts. A negatively charged muon forms an atomic system owing to its negative charge, and is finally absorbed into the nucleus or decays to an electron. The lifetimes of muons differ significantly, depending on whether they are trapped by Fe or C atoms, and identifying the elemental content at the muon stoppage position is possible via muon lifetime measurements. The relationship between the muon capture probabilities of C/Fe and the elemental content of C exhibits a good linearity, and the C content in the steel may be quantitatively determined via muon lifetime measurements. Furthermore, by controlling the incident energies of the muons, they may be stopped in each layer of a stacked sample consisting of three types of steel plates with thicknesses of 0.5 mm, and we successfully determined the C contents in the range 0.20 - 1.03 wt% depth-selectively, without sample destruction.

Decommissioning state of Plutonium Fuel Fabrication Facility; Dismantling the glove box W-9 and equipment interior, and a part of tunnel F1

Nagai, Yuya; Shuji, Yoshiyuki; Kawasaki, Takeshi; Aita, Takahiro; Kimura, Yasuhisa; Nemoto, Yasunori*; Onuma, Takeshi*; Tomiyama, Noboru*; Hirano, Koji*; Usui, Yasuhiro*; et al.

JAEA-Technology 2022-039, 117 Pages, 2023/06

JAEA-Technology-2022-039.pdf:11.96MB

Japan Atomic Energy Agency (JAEA) manages wide range of nuclear facilities. Many of these facilities are required to be performed adjustment with the aging and complement with the new regulatory standards and the earthquake resistant, since the Great East Japan Earthquake and the Fukushima Daiichi Nuclear Power Station accident. It is therefore desirable to promote decommissioning of facilities that have reached the end of their productive life in order to reduce risk and maintenance costs. However, the progress of facility decommissioning require large amount of money and radioactive waste storage space. In order to address these issues, JAEA has formulated a "The Medium/Long-Term Management Plan of JAEA Facilities" with three pillars: (1) consolidation and prioritization of facilities, (2) assurance of facility safety, and (3) back-end countermeasures. In this plan, Plutonium Fuel Fabrication Facility has been selected as primary decommissioned facility, and dismantling of equipment in the facilities have been underway. In this report, size reduction activities of the glove box W-9 and a part of tunnel F-1, which was connected to W-9, are presented, and the obtained findings are highlighted. The glovebox W-9 had oxidation & reduction furnace, and pellet crushing machine as equipment interior. The duration of activity took six years from February 2014 to February 2020, including suspended period of 4 years due to the enhanced authorization approval process

Outlining zircon growth in a granitic pluton using 3D cathodoluminescence patterns, U-Pb age, titanium concentration, and Th/U; Implications for the magma chamber process of Okueyama granite, Kyushu, Japan

Yuguchi, Takashi*; Ito, Daichi*; Yokoyama, Tatsunori; Sakata, Shuhei*; Suzuki, Satoshi*; Ogita, Yasuhiro; Yagi, Koshi*; Imura, Takumi*; Motai, Satoko*; Ono, Takeshi*

Lithos, 440-441, p.107026_1 - 107026_14, 2023/03

https://doi.org/10.1016/j.lithos.2023.107026

We propose a new method for elucidating zircon growth in granitic plutons, based on variations in three-dimensional 3D cathodoluminescence (CL) patterns, U-Pb ages, titanium concentration, and Th/U ratios. We focused on the zircon growth processes in the Okueyama granite (OKG) in central Kyushu, Japan, to obtain interpretations of magma chamber processes that result in the formation of granitic plutons. The OKG consists of three lithofacies: biotite granite (BG), hornblende granite (HG), and hornblende granodiorite (HGD). To determine the 3D internal structure and growth pattern of a zircon crystal, we performed CL observations for multi-sections of the samples. Simultaneously, we also determined the zircon U-Pb age and titanium concentration of the center sections of the samples. The 3D distribution of the oscillatory zoning can be used to determine the crystal nucleus. The simultaneous determination of zircon U-Pb ages and Ti concentrations of the granite samples indicates the time-temperature (t-T) history of granitic magma before its solidification. The t-T histories of the BG, HG, and HGD represented similar cooling behaviors within the magma chamber: rapid cooling from the zircon crystallization temperature to the closure temperature of the biotite K-Ar system between 16 Ma and 10 Ma. The variations in the Th/U ratios against temperature also demonstrate a different trend at the boundary of approximately 670 C. Fractional crystallization in the magma chamber progressed significantly at temperatures above 670 C; below 670 C, crystallization progressed slowly, indicating only minimal changes in the magma composition. The variations in the Th/U ratio against temperature in the BG, HG, and HGD portrayed common tendencies, indicating the same behavior in the progression of fractional crystallization among the three lithofacies, which in turn, represented the same behavior within the entire magma chamber.

Rotation of complex ions with ninefold hydrogen coordination studied by quasielastic neutron scattering and first-principles molecular dynamics calculations

Omasa, Yoshinori*; Takagi, Shigeyuki*; Toshima, Kento*; Yokoyama, Kaito*; Endo, Wataru*; Orimo, Shinichi*; Saito, Hiroyuki*; Yamada, Takeshi*; Kawakita, Yukinobu; Ikeda, Kazutaka*; et al.

Physical Review Research (Internet), 4(3), p.033215_1 - 033215_9, 2022/09

https://doi.org/10.1103/PhysRevResearch.4.033215

PSTEP: Project for solar-terrestrial environment prediction

Kusano, Kanya*; Ichimoto, Kiyoshi*; Ishii, Mamoru*; Miyoshi, Yoshizumi*; Yoden, Shigeo*; Akiyoshi, Hideharu*; Asai, Ayumi*; Ebihara, Yusuke*; Fujiwara, Hitoshi*; Goto, Tadanori*; et al.

Earth, Planets and Space (Internet), 73(1), p.159_1 - 159_29, 2021/12

https://doi.org/10.1186/s40623-021-01486-1

The PSTEP is a nationwide research collaboration in Japan and was conducted from April 2015 to March 2020, supported by a Grant-in-Aid for Scientific Research on Innovative Areas from the Ministry of Education, Culture, Sports, Science and Technology of Japan. It has made a significant progress in space weather research and operational forecasts, publishing over 500 refereed journal papers and organizing four international symposiums, various workshops and seminars, and summer school for graduate students at Rikubetsu in 2017. This paper is a summary report of the PSTEP and describes the major research achievements it produced.

Evaluation of edge domains in giant magnetoresistive junctions

Frost, W.*; Seki, Takeshi*; Kubota, Takahide*; Ramos, R.*; Saito, Eiji; Takanashi, Koki*; Hirohata, Atsufumi*

Applied Physics Letters, 118(17), p.172405_1 - 172405_5, 2021/04

https://doi.org/10.1063/5.0049315

Reliability of J-PARC accelerator system over the past decade

Yamamoto, Kazami; Hasegawa, Kazuo; Kinsho, Michikazu; Oguri, Hidetomo; Hayashi, Naoki; Yamazaki, Yoshio; Naito, Fujio*; Yoshii, Masahito*; Toyama, Takeshi*

JPS Conference Proceedings (Internet), 33, p.011016_1 - 011016_7, 2021/03

https://doi.org/10.7566/JPSCP.33.011016

The Japan Proton Accelerator Research Complex (J-PARC) is a multipurpose facility for scientific experiments. The accelerator complex consists of a 400-MeV Linac, a 3-GeV Rapid-Cycling Synchrotron (RCS) and a 30-GeV Main Ring synchrotron (MR). The RCS delivers a proton beam to the neutron target and MR, and the MR delivers the beams to the neutrino target and the Hadron Experimental Facility. The first operation of the neutron experiments began in December 2008. Following this, the user operation has been continued with some accidental suspensions. These suspensions include the recovery work due to the Great East Japan Earthquake in March 2011 and the radiation leak incident at the Hadron Experimental Facility. In this report, we summarize the major causes of suspension, and the statistics of the reliability of J-PARC accelerator system is analyzed. Owing to our efforts to achieve higher reliability, the Mean Time Between Failure (MTBF) has been improved.

Relation between biomolecular dissociation and energy of secondary electrons generated in liquid water by fast heavy ions

Tsuchida, Hidetsugu*; Kai, Takeshi; Kitajima, Kensei*; Matsuya, Yusuke; Majima, Takuya*; Saito, Manabu*

European Physical Journal D, 74(10), p.212_1 - 212_7, 2020/10

https://doi.org/10.1140/epjd/e2020-10172-x

Fundamental study of interaction between biomolecules and heavy ions in water is very important to predict an initial stage of radiation biological effects. A heavy ion irradiation experiment into droplet target assumed as a biological system in a vacuum was performed to measure production yields of cations and anions for glycine, which was ejected from the droplet target to the vacuum. However, the production mechanisms have been unknown. The PHITS code adapting ion track structure mode was used to analyze the production mechanisms from the dose evaluation at the surface between the vacuum and the water. It is found that induction yields of ionization and excitation, and dissociative electron attachment involved in the secondary electrons were correlated with the production yields of cations and anions of the glycine. The results provide us newly scientific insights to predict an initial stage of radiation biological effects.

Enhancement of element production by incomplete fusion reaction with weakly bound deuteron

Wang, H.*; Otsu, Hideaki*; Chiga, Nobuyuki*; Kawase, Shoichiro*; Takeuchi, Satoshi*; Sumikama, Toshiyuki*; Koyama, Shumpei*; Sakurai, Hiroyoshi*; Watanabe, Yukinobu*; Nakayama, Shinsuke; et al.

Communications Physics (Internet), 2(1), p.78_1 - 78_6, 2019/07

https://doi.org/10.1038/s42005-019-0165-1

Searching for effective pathways for the production of proton- and neutron-rich isotopes through an optimal combination of reaction mechanism and energy is one of the main driving forces behind experimental and theoretical nuclear reaction studies as well as for practical applications in nuclear transmutation of radioactive waste. We report on a study on incomplete fusion induced by deuteron, which contains one proton and one neutron with a weak binding energy and is easily broken up. This reaction study was achieved by measuring directly the cross sections for both proton and deuteron for Pd at 50 MeV/u via inverse kinematics technique. The results provide direct experimental evidence for the onset of a cross-section enhancement at high energy, indicating the potential of incomplete fusion induced by loosely-bound nuclei for creating proton-rich isotopes and nuclear transmutation of radioactive waste.